Kent · England

Non-Slip Bath Coating in Seasalter

Clear non-slip coatings for baths and shower trays at your home in Seasalter, with a one-year guarantee on every repair.

  • Safety for older or less mobile people
  • A bath or tray that is slippery when wet
  • Worn-out textured areas
Surface Doctor technician refinishing the outside of a roll-top bath

Non-slip bath coating near Seasalter

What non-slip bath coating costs

You’ll know the full cost before you book. We take into account:

  • The type of damage
  • The material and finish
  • Previous DIY repairs that have to come out
  • Whether we combine several jobs

Our prices are the same across the UK, so there’s no premium for Seasalter. What changes the price is the job itself: the material, the amount of damage and how many items.

Send pictures for a quote

Almost every job we do is priced from pictures. This is what we need:

  • Whether it’s been repaired or coated before
  • One picture of the whole bath or shower tray
  • The material, if you know it
  • A coin or ruler next to the damage for scale

You don’t need a survey visit. Photos are enough for us to price nearly every job: we need a close-up, a wider picture and your postcode, and we will come back to you with a fixed figure.

Non-slip bath coating in Seasalter without replacing anything

It suits older people, families and holiday lets. The coating is clear and textured, so the bath looks much the same. If you are dealing with safety for older or less mobile people and bath mats that harbour mould or get forgotten, we can help, on acrylic baths, shower trays and wet room floors (ask us) alike.

You’re covered after we leave: our one-year guarantee applies to every job, and we explain what it covers before you book. A soft brush and mild cleaner keep it clean. Avoid scourers on the coating.

Discoloured square shower tray restored with a new white finish
Where
Seasalter (CT5)
Area hub
Kent
Warranty
A year, on every repair
Quotes
Free, fixed quote from pictures
Phone
0345 017 0787
Page updated
23 October 2026

How the visit works

Arrival times are agreed in advance, so you know when to expect us. Once we are there, the work takes a morning or an afternoon in most cases. We leave the room clean and you’ll know when it can be used.

  1. We start by degreasing the area where you stand.
  2. We mask out the area to be treated.
  3. We apply the clear textured coating.
  4. The masking comes off to leave a neat edge.
  5. Once it has cured, normally overnight, it’s ready.

Preparing for the visit

  • Let us know about parking or access
  • Point us to the nearest place to park
  • Have a window or extractor fan available

Get a quote

Getting a quote takes a couple of minutes: take one close-up and one wider shot of the bath or shower tray, add your postcode and send them to us. You’ll get a fixed quote, not an estimate.

Send photos for a quote

Related advice

Should I try a DIY kit first?

If you are set on a kit, follow its instructions closely, and don’t use it until it has fully cured. If it fails, we can still put it right.

DIY kits are sold for most surfaces, and they can tidy up a tiny mark. Where they fall down is colour and preparation: they come in a handful of shades, and if the surface isn’t prepared the repair will not last.

Common questions in Seasalter

Is it OK to have pets in the house?

Keep pets and children away from the work area on the day, so the repair is not disturbed while it cures.

Do you do work for letting agents?

We do, regularly. We can quote for several properties together and work between tenancies.

Do you cover Seasalter?

Yes, we do. Repair technicians travel to Seasalter from across the region, with no extra charge for travel.

How do I get a price for non-slip bath coating in Seasalter?

Every job gets a fixed price from your pictures. Send a close-up of the damage and a wider photo and your postcode.

Will it make a mess?

We protect the room with dust sheets and masking first, and we clean up when we’ve finished.

Is my repair covered?

All our work carries our one-year guarantee. We’ll explain what it covers when we quote.

Do the materials smell?

A little, depending on the job. Ventilation keeps it to a minimum.

What happens next?

We look at the photos and reply with a fixed price and some dates. If we need another angle, we’ll ask.

For landlords and businesses

We regularly work with letting and managing agents. Just send pictures, the address and how to get access.

We also carry out snagging repairs for builders and developers, putting right damage done during fitting so nothing needs replacing. We’re CHAS, Constructionline and SafeContractor accredited.

When we’d advise against a repair

We will always be straight with you, so here’s what a repair will not do:

  • Surfaces that are already damaged or peeling (these need repairing first)
  • Textured areas still wet or recently cleaned with oily products
  • Outdoor surfaces

Send us pictures and we’ll tell you honestly.

What we work on

  • Enamelled baths
  • Acrylic baths
  • Resurfaced baths
  • Wet room floors (ask us)
  • Shower trays

Do you need non-slip bath coating in Seasalter?

Smooth surfaces are easy to clean, yet wet, soapy surfaces are slippery. Textured areas on older baths wear smooth too.

Most people contact us after spotting one of these:

  • Bath mats that harbour mould or get forgotten
  • Safety for older or less mobile people
  • Resurfaced baths that are now too smooth
  • A bath or tray that is slippery when wet

Comparing quotes

  • Who turns up on the day
  • The length of the guarantee and what it covers
  • How changes to the job are handled
  • What prep work is covered

How to compare quotes

Should you replace it?

The alternatives are a new textured bath or tray, or relying on a mat, which traps water and needs cleaning. A non-slip coating adds grip to the bath you have. Instead of hourly rates, we price the whole job up front. Damage, material and access decide it.

Why Seasalter customers choose us

  • Free fixed quotes from pictures
  • Repair technicians who travel to you, UK-wide
  • Straight answers about what a repair can do
  • CHAS and Constructionline accredited

See our full price list.

About Seasalter

Seasalter is about 2 miles west of Whitstable, in Kent. From the centre of Seasalter to the outlying streets, the service is the same: a fixed price, a tidy visit and a guarantee. Our technicians cover all 922 towns and villages across Kent. We work right across the region, from Seasalter to London (48 miles away).

All of CT5 is covered, from the main roads to the quietest streets. Whether you live on Eden Road, Allan Road and Church Lane or anywhere nearby, a technician can come to you. We also cover the places around Seasalter: Highstreet (1 mile south), Waterham (2 miles south-west), Dargate (2 miles south), Graveney (3 miles south-west) and Hernhill (3 miles south-west). Within a short drive, we also cover Ashford (15 miles south), Canterbury (6 miles south-east), Sittingbourne (11 miles west), Faversham (5 miles south-west), Herne Bay (6 miles east) and Minster (10 miles north-west).

Near you in Seasalter

We visit homes around Seasalter Levels, The Whitstable School and The Jolly Sailor pub. Other local landmarks include Seasalter Christian Centre (under half a mile south-east) and Joy Lane Primary Foundation School (0.9 miles east). Seasalter’s nearest station is Whitstable station, about 1.8 miles north-east. Nearby you’ll also find Tankerton Castle (2 miles north-east) and Whitstable and Tankerton Hospital (2.5 miles north-east). Open spaces near Seasalter include Blean Woods RSPB Reserve.

Map of Seasalter © OpenStreetMap contributors
CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.