Kent · England
Bath Re-enamelling in Seasalter
Bath re-enamelling in and around Seasalter: photo quotes, tidy work and a year’s guarantee.
- Resurfacing from £350
- An old resurfacing that’s failing
- A dull, rough surface that won’t come clean
Bath re-enamelling in Seasalter, done in place
Many of the baths we re-enamel are period roll-tops, which are heavy, hard to move and costly to replace. Resurfacing them in place keeps the original bath. If you are dealing with a dull, rough surface that won’t come clean and chips and rust in more than one place, we can typically put it right, whatever the material.
You are covered after we leave: our one-year guarantee applies to every job, and we’ll explain exactly what it covers when we quote.
- Location
- Seasalter (CT5)
- County
- Kent
- Warranty
- 12 months on all our work
- Quotes
- From £350. Free, fixed quote from pictures
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
Materials and what they mean for the repair
Cast iron
Re-enamelling suits cast iron baths perfectly. The body lasts for generations; only the enamel wears, so resurfacing gives them a new life.
Roll-top and period baths
We can resurface a roll-top inside and out, and the outside can be refinished too.
When to call us in Seasalter
Frequently the bath has just had decades of use. Underneath, a cast iron or steel bath is normally as strong as ever.
Keep an eye out for any of the following:
- Lots of chips and rust spots
- A period or roll-top bath worth keeping
- A peeling or bubbling previous coating
- Enamel that is lost its shine and feels rough
Questions to ask before you book
- If travel is included in the price
- What aftercare is recommended
- What prep work is covered
- How soon you can use it again
Should you replace it?
Replacement only makes sense in a few cases: a cracked-through bath, a change of size or shape, or a full refit. In most other cases, resurfacing is the better choice. Prices start from £350. There are no surprise extras on the day. The price we quote from your pictures is the price you pay, and if the damage turns out to be different, we discuss it before starting.
Why choose Surface Doctor in Seasalter
- Colour mixed on the day to match
- Technicians who travel to you, UK-wide
- No extra charge for your area
- CHAS, Constructionline and SafeContractor accredited
Take a look at our full price list and resurfacing vs replacement cost guide.
Seasalter and the surrounding area
Seasalter is about 2 miles west of Whitstable, in Kent. Our work suits any type of property, from flats and terraces to detached houses and new builds, as well as offices, shops and holiday lets. Seasalter is one of 922 towns and villages in Kent where we work. Our jobs stretch from Seasalter to London (about 48 miles away).
We cover every part of the CT5 postcode area and the streets around it. Whether you live on Eden Road, Allan Road and Church Lane or a nearby road, a technician can come to you. We also cover the places around Seasalter: Highstreet (1 mile south), Waterham (2 miles south-west), Dargate (2 miles south), Graveney (3 miles south-west) and Hernhill (3 miles south-west). Larger places within reach include Ashford (15 miles south), Canterbury (6 miles south-east), Sittingbourne (11 miles west), Faversham (5 miles south-west), Herne Bay (6 miles east) and Minster (10 miles north-west).
Landmarks near Seasalter
Our clients here include homes close to Seasalter Levels, The Whitstable School and The Jolly Sailor pub, among other places. Other local landmarks include Seasalter Christian Centre (under half a mile south-east) and Joy Lane Primary Foundation School (0.9 miles east). For rail, the closest station is Whitstable station, about 1.8 miles north-east. Further afield, we also cover the area around Tankerton Castle (2 miles north-east) and Whitstable and Tankerton Hospital (2.5 miles north-east). Green spaces nearby include Blean Woods RSPB Reserve.
Should I try a DIY kit first?
DIY kits are sold for most surfaces, and they can make a small mark look better. The trouble is colour and preparation: they come in a handful of shades, and if the surface is not prepared the repair will not last.
It’s tempting to reach for a kit, but many of the jobs we do start with putting right a DIY repair. Getting it right first time is generally cheaper.
The process
The work is clean and fairly quiet. Protection goes down first, then the job itself takes the best part of a day. Before we leave, we explain the curing time and the aftercare.
- We mask and protect the room and ventilate it.
- The bath is cleaned, degreased and any chips or rust repaired.
- The surface is prepared and a bonding primer applied.
- Several coats of new finish are sprayed on.
- Once cured, normally by the following day, the bath is ready.
Preparing for the visit
- Tell us if there are stairs or a lift
- Let us know about parking or access
- Move bottles, mats and clutter away from the area
Getting a price
Pricing is simple: take a close-up of the damage and a photo from further back, send them over with your postcode, and we will reply with a fixed quote. There is no charge for the quote and you’re under no obligation.
Read more
Nearby places to Seasalter
Also in Seasalter
What affects the price in Seasalter
Resurfacing from £350. There’s no area surcharge for Seasalter. The price reflects:
- Whether we combine several jobs
- How easy the damage is to reach
- The type of damage
- Whether old repairs or coatings need taking off
We charge the same wherever you are, so there is no premium for Seasalter. The job itself decides the price: how much damage, what it’s made of and how many items.
Quotes from your pictures
Phone pictures are fine. Just ensure we can see:
- Whether it’s been repaired or coated before
- Natural light rather than flash
- What it’s made of, if you know
- A close-up of the damage, in focus
For most jobs, photos are all we need to give you a price. Tell us what happened and where you are, and we’ll reply with a fixed quote and the earliest dates we have.
When a repair isn’t the answer
We will always be straight with you, so here’s what a repair will not do:
- A bath that is rusted through
- A poorly supported acrylic bath, until it’s firmed up
- A cast iron or steel bath that is cracked right through
If in doubt, send pictures and we’ll say what we think.
Materials we repair
- Basins & shower trays
- Cast iron baths
- Acrylic baths
- Victorian roll-tops
- Pressed steel baths
Work for landlords and builders
We work for landlords, letting agents and housing providers in Seasalter as well as homeowners. Repairing between tenancies keeps void periods short, and it costs much less than replacing.
We carry out planned and one-off repairs for housing associations and facilities teams in Kent and across the UK. Repairing in place avoids the disruption of a replacement, which matters when someone is living in the home.
Seasalter questions
Can you fix a peeling bath coating?
Yes. Stripping the old coating adds time, so it’s reflected in the quote.
How long will the bath be out of use?
Typically one day, with the bath ready the next day. Deeply pitted baths may need a second day.
How long does re-enamelling last?
It depends on preparation, use and care. Properly prepared and looked after, it lasts well, and it’s guaranteed for a year.
Can landlords book you?
We do, regularly. We quote for multiple addresses and fit around tenancy changeovers.
Is it safe with children and pets around?
Please keep children and pets out of the room during the visit. Everywhere else in the home is fine.
Is it worth repairing rather than replacing?
In most cases, yes. A repair skips the removal, fitting and redecorating. If it isn’t worth repairing, we’ll tell you.
Will the price change on the day?
Your quote covers the damage in the photos. Anything extra is discussed before we begin.
Do you cover the entire of Kent?
All of Kent, and the rest of the UK. Travel is included in the price.
About our accreditations · Every repair comes with a one-year guarantee.
