Isle of Wight · England
Non-Slip Bath Coating for Seaview homes
Non-slip bath coating in Seaview without the cost of replacing. Get a fixed quote from your photos, then book a visit.
- Resurfaced baths that are now too smooth
- Worn-out textured areas
- Safety for older or less mobile people

Non-slip bath coating in Seaview, done in place
It suits older people, families and holiday lets. It’s a clear, textured coating, so it shows only as a slightly matt area where you stand. Whether it’s worn-out textured areas and bath mats that harbour mould or get forgotten, we can help.
Big or small, you get the same one-year guarantee in Seaview and across Isle of Wight. A soft brush and mild cleaner keep it clean. Do not use abrasive pads on the textured area.
- Area
- Seaview (PO34)
- County
- Isle of Wight
- Guarantee
- A year, on every repair
- Quotes
- Fixed and free, based on photos
- Call
- 0345 017 0787
- Last updated
- 23 October 2026

Why repair rather than replace?
Instead, you could go for replacing the bath or tray with a textured one, or relying on a mat that needs lifting and cleaning. A coating adds grip to the bath you have. The price reflects the work involved, not your postcode. The full price is agreed before you book.
Why choose Surface Doctor in Seaview
- CHAS and Constructionline accredited
- One visit for most repairs
- Fixed prices from your photos
- Same prices wherever you are
Take a look at our full price list.
Seaview and the surrounding area
Seaview is about 2 miles east of Ryde, in Isle of Wight. Across the PO34 area, we carry out the work at your property. Seaview is one of 125 places in Isle of Wight we cover. You can also see our page for London, about 70 miles away.
Postcode districts we cover here: PO34. Whether you live on High Street, Madeira Road and Church Street or a nearby road, we can come to you. Close by, we cover Nettlestone (1 mile south), Spring Vale (1 mile north-west), Pondwell (1 mile west), Puckpool (1 mile west) and Appley (2 miles west). Larger places within reach include Newport (8 miles west), Cowes (9 miles west), Sandown (5 miles south-west), Shanklin (7 miles south-west), Ventnor (10 miles south-west) and East Cowes (8 miles west). If you are somewhere remote, call first so we can plan the visit.
Near you in Seaview
Typical jobs here are in homes near St. Peter's Church, The Boat House and Nettlestone Primary School and the streets around them. For rail, the closest station is Smallbrook Junction station, roughly 2 miles west. Nearby you will also find Southsea Castle (4.1 miles north) and Gosport War Memorial Hospital (5.3 miles north). The countryside around Seaview includes Brading Down and Alan Hersey Nature Reserve.
FAQs for Seaview
Is a non-slip bath easy to clean?
Yes. Use a soft brush and a mild cleaner.
Are you accredited?
Yes. Our accreditations include CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.
I’m a tenant. Can you help?
We’re happy to deal with the tenant, landlord or agent. Just make sure the landlord agrees.
Is there a call-out fee?
No. Our quotes include travel, and we charge the same wherever you are.
Can you do more than one item on the same visit?
Yes, and it’s often cheaper. Send pictures of everything together and we’ll quote them together.
What happens after I send photos?
We come back with a fixed price. There is no obligation to book.
Do I have to be there?
We need someone to let us in. You do not need to watch us work.
Is it worth repairing rather than replacing?
Typically, when the rest is in good condition. A repair avoids removal and making good. We will tell you honestly if replacement makes more sense.
Signs you need non-slip bath coating in Seaview
Baths and trays are made smooth so they’re easy to clean, but wet, soapy surfaces are slippery. Textured areas on older baths wear smooth too.
It’s worth getting a quote if you see:
- Bath mats that harbour mould or get forgotten
- Resurfaced baths that are now too smooth
- Safety for older or less mobile people
- Worn-out textured areas
Before you book anyone
- Whether the colour is mixed to match
- What protection goes down before work starts
- Who turns up on the day
- Is the price fixed, and does it include VAT?
DIY kit or professional repair?
You can buy a DIY kit for most repairs, and they can make a small mark look better. Where they fall down is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler often lifts.
A DIY attempt is not a disaster. We remove the old filler and start again, so it doesn’t stop a professional repair. Just mention it when you send pictures, as it can add time.
Places near Seaview
Also in Seaview
How we price non-slip bath coating
You will not pay by the hour. The price is based on:
- Unusual colours or finishes
- How many areas need work
- Where the damage is and how we get to it
- Whether it’s a chip, crack, burn or wear
Set against the cost of replacement, a repair is generally a fraction of the price, because there’s no removal, plumbing or making good. The quote lists exactly what you are paying for.
Send pictures for a quote
You can normally get a fixed price without us visiting. To make it quick:
- One sharp close-up of the damage
- Natural light rather than flash
- A photo taken from further back
- Details of any past repairs
If you are in Seaview and want a price, the easiest route is pictures: one close up, one from further back, plus your postcode. We reply with a fixed quote and our next available dates.
Work for landlords and builders
We also carry out snagging repairs for builders and developers, putting right damage done during fitting. We are CHAS, Constructionline and SafeContractor accredited.
For developers and builders, we fix damage before handover, so there is no need to replace a damaged item at the last minute. Several plots can be done in one visit to keep costs down.
Honest limits
Not everything can be repaired, and we would rather say so up front. Repairs won’t solve:
- Surfaces that are already damaged or peeling (these need repairing first)
- Textured areas still wet or recently cleaned with oily products
- Outdoor surfaces
If in doubt, send photos and we’ll say what we think.
What we work on
- Acrylic baths
- Shower trays
- Wet room floors (ask us)
- Resurfaced baths
- Enamelled baths
What we do, step by step
On the day itself, there is little for you to do. Let us in and show us the room, and we will take it from there. Most visits take a few hours.
- We clean and degrease the standing area.
- The area to be treated is masked out.
- The clear textured coating is applied.
- We lift the masking for a clean edge.
- The coating is left to cure before use, normally overnight.
How to prepare
- Let the surface dry out before the visit
- Keep pets and children out of the room while we work
- Make sure the room can be ventilated
Ask for a price
Upload a picture of the damage and a wider shot of the whole item, with your PO34 postcode, and we’ll come back with a fixed quote.
Advice
About our accreditations · Every repair comes with a one-year guarantee.

