Oldham · England
Non-Slip Bath Coating for Sholver homes
Clear non-slip coatings for baths and shower trays for homes and businesses in Sholver and across Oldham. Send photos for a free, fixed quote.
- Safety for older or less mobile people
- Bath mats that harbour mould or get forgotten
- Worn-out textured areas
How we price non-slip bath coating
We charge the same across the UK, including Sholver. The price reflects:
- Doing more than one item at once
- How easy the damage is to reach
- Any earlier repairs that need removing first
- What the surface is made of
A repair usually costs much less than people expect, particularly next to the cost of replacement. Send pictures and we’ll give you the exact figure.
How to get a fixed price
Photographing the damage takes a minute. Try to send:
- One picture of the entire bath or shower tray
- The postcode, so we can plan the visit
- Details of any past repairs
- The material, if you know it
There is no need for us to visit first. Photos are enough for us to price nearly every job: send a close-up, a wider shot and your postcode, and we will reply with a fixed price.
Non-slip bath coating at your home in Sholver
It suits homes with older or less mobile people, holiday lets and families. It’s a clear, textured coating, so it shows only as a slightly matt area where you stand. Our technicians work on acrylic baths, wet room floors (ask us) and resurfaced baths, and the jobs we see most are bath mats that harbour mould or get forgotten and a bath or tray that is slippery when wet.
You’re covered after we leave: each job carries a one-year guarantee, and we explain what it covers before booking. Clean with a soft brush and a mild cleaner. Avoid scourers on the coating.
- Where
- Sholver (OL1, OL4, OL2)
- County
- Oldham
- Guarantee
- One year on every repair
- Quotes
- Free and fixed, from your pictures
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
Nearby places to Sholver
What else we do in Sholver
Should you replace it?
Instead, you could go for a new textured bath or tray, or a bath mat that needs lifting and cleaning. A non-slip coating treats your existing bath or tray. Rather than charging by the hour, we price the whole job up front. Damage, material and access decide it, and combining items on one visit brings it down.
Why book with us
- Work done at your home or business
- A year’s guarantee on all work
- Dust sheets down, tidy finish
- CHAS and Constructionline accredited
See our pricing.
Honest limits
It helps to know what we cannot do:
- Surfaces that are already damaged or peeling (these need repairing first)
- Textured areas still wet or recently cleaned with oily products
- Outdoor surfaces
Send us photos and we’ll tell you honestly.
Materials we work on in Sholver
- Shower trays
- Acrylic baths
- Enamelled baths
- Resurfaced baths
- Wet room floors (ask us)
Your questions about non-slip bath coating in Sholver
How do I clean it?
Yes. A soft brush and mild cleaner is all it needs.
Is a repair better than a new one?
Generally, if the item is otherwise sound. A repair avoids removal and making good. If replacing would be better, we will say so.
Is it safe with children and pets around?
Keep pets and children away from the work area on the day.
Can I get a quote without a visit?
Normally, yes. A close-up and a wider photo are enough to give a fixed quote.
Can you do more than one item on the same visit?
Yes, and it’s frequently cheaper. Send pictures of everything together and we’ll quote them together.
It’s been repaired before. Can you still fix it?
Yes, regularly. It can add a little time, which we include in the quote.
Are you accredited?
Yes, including CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.
What information do you need?
Just pictures, your postcode and a contact number. On the day, we only need access to the room.
How it works
The work is clean and fairly quiet, so you can stay at home while we are there. We protect the area first, then the job itself takes a morning or an afternoon. At the end we talk you through the curing time and the aftercare.
- We start by degreasing the area where you stand.
- The area to be treated is masked out.
- We apply the clear textured coating.
- We lift the masking for a clean edge.
- The coating is left to cure before use, normally overnight.
Preparing for the visit
- Make sure the room can be ventilated
- Keep a parking space free if you can
- Clear the area around the damage
Ask for a price
Most customers in Sholver get their price from pictures. Add a line about what happened and your postcode, and we will send back a fixed quote and some dates.
Read more
Signs you need non-slip bath coating in Sholver
Baths and trays are made smooth so they’re easy to clean, but wet, soapy surfaces are slippery. Textured areas on older baths wear smooth too.
These are the problems we’re asked about most:
- A bath or tray that is slippery when wet
- Resurfaced baths that are now too smooth
- Safety for older or less mobile people
- Bath mats that harbour mould or get forgotten
Comparing quotes
- How soon you can use it again
- What happens if the damage is worse than the pictures show
- Whether a trained technician does the job
- What protection goes down before work starts
Work for landlords and builders
Builders, developers and site managers book us for snagging repairs, putting right damage done during fitting so nothing needs replacing. We hold CHAS, Constructionline and SafeContractor accreditations.
We are used to working with agents and managing companies. Just send pictures, the address and how to get access and we’ll handle the rest.
Can I fix it myself?
If you’ve already tried a DIY fix, that’s fine. We take the old repair out and do it properly, so it will not stop us repairing it. Just mention it when you send pictures, as it can add time.
The difference between a kit and a professional repair is mostly in the preparation and colour. We prepare the area properly, mix the colour on site and polish the finish to match, then guarantee it for a year.
Sholver and nearby
Sholver is about 1 mile south-east of Shaw, in Oldham. Anywhere in OL1, we come to you. We cover all 72 towns and villages across Oldham. We work right across the region, from Sholver to Manchester (about 9 miles away).
Postcode districts we cover here: OL1, OL4 and OL2. From Cop Road, King Lane and Haven Lane or anywhere nearby, we can come to you. Being close to the A672, Sholver is simple for us to get to. Neighbouring places we cover include Moorside (1 mile south), Grains Bar (1 mile north-east), Watersheddings (1 mile south-west), Top o' th' Meadows (1 mile south-east) and Crossbank (1 mile south). Further out, we also cover Chadderton (3 miles south-west), Failsworth (5 miles south-west), Coppice (3 miles south-west), Werneth (3 miles south-west), Hathershaw (3 miles south-west) and Cowhill (3 miles south-west).
Local landmarks in Sholver
Typical jobs here are in homes near Bulls Head Tavern, St Thomas Moorside CofE (VA) Primary School and Oldham Pupil Referral Unit, among other places. You will also find Counthill School (0.7 miles south) and Church of St Thomas (less than half a mile south-west). For rail, the closest station is Greenfield station, roughly 3.1 miles south-east of the centre. Nearby you will also find Ellenroad Ring Mill Engine (2.8 miles north-west) and Royal Oldham Hospital (2.2 miles south-west). Not far away are Tandle Hill.
About our accreditations · Every repair comes with a one-year guarantee.
