Redcar and Cleveland · England
Non-slip bath & shower coating in Skelton-in-Cleveland, Redcar and Cleveland
Non-slip bath coating for Skelton-in-Cleveland, without a refit. Send us photos for a fixed price, then book a visit.
- Bath mats that harbour mould or get forgotten
- Resurfaced baths that are now too smooth
- Worn-out textured areas
How we handle non-slip bath coating in Skelton-in-Cleveland
It’s a clear, textured coating, so the bath looks much the same. It suits older people, families and holiday lets. We are often asked to fix safety for older or less mobile people and worn-out textured areas, in acrylic baths, wet room floors (ask us) and shower trays.
Whatever the size of the job, it’s backed by a one-year guarantee in Skelton-in-Cleveland and across Redcar and Cleveland. Clean with a soft brush and a mild cleaner. Do not use abrasive pads on the textured area.
- Area
- Skelton-in-Cleveland (TS12, TS11)
- Area hub
- Redcar and Cleveland
- Cover
- A year, on every repair
- Quote
- Free, fixed quote from pictures
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
Our work in Skelton-in-Cleveland
Skelton-in-Cleveland is about 4 miles north-east of Guisborough, in Redcar and Cleveland. Jobs in Skelton-in-Cleveland are booked in like any other job: a fixed quote from pictures, then a visit to do the work. Skelton-in-Cleveland is one of 48 places in Redcar and Cleveland where we work. You can also see our page for Newcastle upon Tyne, about 39 miles away.
Our technicians cover all of the TS12 and TS11 postcode area. Streets in the area include Back Lane, Eden Road and Green Road, all of which we cover. Being close to the A173 and A174, Skelton-in-Cleveland is easy for our technicians to reach. Nearby, we also work in Skelton (1 mile east), Skelton Green (1 mile south), North Skelton (1 mile east), Boosbeck (1 mile south) and Saltburn-by-the-Sea (1 mile north). Within a short drive, we also cover Redcar (4 miles north-west), Guisborough (4 miles south-west), Eston (7 miles west), Grangetown (6 miles west), South Bank (8 miles west) and Loftus (4 miles east). As one of the bigger places in Redcar and Cleveland, Skelton-in-Cleveland is somewhere we visit often.
Local landmarks in Skelton-in-Cleveland
Typical jobs here are in homes near Old All Saints Church, Huntcliff School and Skelton Primary School. For rail, the closest station is Saltburn station, about 1.6 miles north. A little further out are Skelton Castle (less than half a mile north-west) and Redcar Primary Care Hospital (4.2 miles north-west). For a walk, there’s Freebrough Hill.
When to call us in Skelton-in-Cleveland
Smooth surfaces are easy to clean, yet wet, soapy surfaces are slippery. The textured patch on an older bath also wears down over time.
It’s worth getting a quote if you see:
- Resurfaced baths that are now too smooth
- Bath mats that harbour mould or get forgotten
- Worn-out textured areas
- Safety for older or less mobile people
What your quote should include
- How long the guarantee is and what it covers
- Who will actually do the work
- How changes to the job are handled
- What preparation is included
Questions from Skelton-in-Cleveland
Will I see the coating?
Very little: it shows as a matt area where you stand.
Can you redo someone else’s repair?
Yes, we frequently do. It can add a little time, which we include in the quote.
How quickly can you book me in?
That depends on our diary for your area. Send pictures with your postcode and we will reply with the earliest dates.
I rent my home. Can I book you?
Of course. Check with your landlord; we can send the quote to them too.
Do you work in Skelton-in-Cleveland?
Yes, we do. Technicians travel to Skelton-in-Cleveland from across the region, and the price is the same as everywhere else.
Is it messy?
No. The work area is masked and covered, and we leave the room clean.
Do you work for landlords and businesses?
We do, regularly. We can quote for several properties together and work between tenancies.
Can you do more than one item on the same visit?
Of course, and it typically saves money. Just add the extra items to your pictures and you’ll get one combined price.
Repairing versus replacing in Skelton-in-Cleveland
Instead, you could go for replacing the bath or tray with a textured one, or relying on a mat, which traps water and needs cleaning. A non-slip coating adds grip to the bath you have. Compared with replacing, a repair is normally a fraction of the price, because there is no removal, plumbing or making good. Your fixed quote shows exactly what’s included.
Why book with us
- Rooms protected and left tidy
- Technicians who travel to you, UK-wide
- CHAS and Constructionline accredited
- A fixed quote before you book
Take a look at our full price list.
Also near Skelton-in-Cleveland
More services for Skelton-in-Cleveland
How we price non-slip bath coating
Each job gets its own fixed price. These are the things that affect it:
- What the surface is made of
- Whether it’s a chip, crack, burn or wear
- Unusual colours or finishes
- Where the damage is and how we get to it
Rather than charging by the hour, we fix the price before we start. Damage, material and access decide it.
How to get a fixed price
Good photos mean an accurate price. Here’s what helps:
- A clear, close picture of the problem area
- Good light, ideally daylight, without flash glare
- Your postcode, so we can check dates
- Whether it’s been repaired or coated before
Getting a quote takes a couple of minutes: photograph the damage, then the whole bath or shower tray, add your postcode and send them over. You will get a fixed quote, not an estimate.
Landlord and trade work in Skelton-in-Cleveland
Hospitality businesses cannot afford rooms out of action for long, so we keep visits short and tidy. We can work around your bookings.
Rented homes see more wear and tear, and replacing things at every changeover adds up. A repair between tenancies is a cheaper way to keep the property in good order.
DIY kit or professional repair?
Kits are cheap and easy to find, but the repairs we redo most often are DIY ones that have discoloured or lifted. Getting it right first time is usually cheaper.
A DIY attempt is not a disaster. We remove the old filler and start again, so it won’t stop us repairing it. It does add a little time, so tell us about it when you send photos.
How it works
Expect a friendly, tidy visit. We agree the arrival time in advance, protect the area, then carry out the work, which normally takes a few hours. If we find something your photos didn’t show, we’ll explain it before carrying on.
- First the standing area is cleaned and degreased.
- Next we mask off the area.
- The clear textured coating is applied.
- We lift the masking for a clean edge.
- The coating is left to cure before use, generally overnight.
How to prepare
- Mention any earlier repairs or resurfacing
- Have a window or extractor fan available
- Have somewhere for us to park nearby if possible
Ask for a price
Call 0345 017 0787 or use the quote form. With one close-up and one wider picture, we can price the job without visiting.
Read more
What we cannot put right
To be straight with you, there are a few things a repair will not fix:
- Surfaces that are already damaged or peeling (these need repairing first)
- Textured areas still wet or recently cleaned with oily products
- Outdoor surfaces
Not sure? Send pictures and we’ll give you a straight answer.
Materials we repair
- Resurfaced baths
- Wet room floors (ask us)
- Acrylic baths
- Enamelled baths
- Shower trays
About our accreditations · Every repair comes with a one-year guarantee.
