Norfolk · England

Non-Slip Bath Coating in South Creake

Our repair technicians come to South Creake for clear non-slip coatings for baths and shower trays. Nothing is taken out, and the work is guaranteed.

  • A bath or tray that is slippery when wet
  • Worn-out textured areas
  • Resurfaced baths that are now too smooth
Surface Doctor technician refinishing the outside of a roll-top bath

Trusted non-slip bath coating in South Creake

Can I fix it myself?

If you’ve already tried a DIY fix, that’s fine. We remove the old filler and start again, so it doesn’t stop a professional repair. It does add a little time, so tell us about it when you send photos.

A kit can be fine for a tiny mark out of sight. For damage in plain view, cracks, holes or rust, or coloured finishes, a professional repair is worth it.

Non-slip bath coating at your home in South Creake

It’s popular with older people, families and holiday lets. The coating is clear and textured, so it shows only as a slightly matt area where you stand. Common call-outs are for resurfaced baths that are now too smooth and worn-out textured areas, across shower trays, wet room floors (ask us) and acrylic baths.

Every job is backed for twelve months in South Creake and everywhere else. If something goes wrong with the work, we come back. Clean with a soft brush and a mild cleaner. Avoid scourers on the coating.

Area
South Creake (NR21)
Region
Norfolk
Cover
A year, on every repair
Quotes
Fixed and free, based on photos
Phone
0345 017 0787
Page updated
23 October 2026
Before and after: an old shower tray refinished by Surface Doctor

What we can’t put right

Honesty matters more than a booking, so here’s what a repair can’t fix:

  • Surfaces that are already damaged or peeling (these need repairing first)
  • Textured areas still wet or recently cleaned with oily products
  • Outdoor surfaces

Not sure? Send pictures and we will give you a straight answer before booking.

Materials we work on in South Creake

  • Resurfaced baths
  • Shower trays
  • Wet room floors (ask us)
  • Enamelled baths
  • Acrylic baths

What happens on the day

We agree an arrival time beforehand, so you know when to expect us. On site, it takes a morning or an afternoon. The room is left tidy.

  1. We clean and degrease the standing area.
  2. Next we mask off the area.
  3. The clear textured coating is applied.
  4. The masking comes off to leave a neat edge.
  5. We leave it to cure, typically overnight.

How to prepare

  • Keep pets and children out of the room while we work
  • Move bottles, mats and clutter away from the area
  • Have a window or extractor fan available

Ask for a price

Getting a quote takes a couple of minutes: photograph the damage, then the whole bath or shower tray, include your postcode and send them over. You will get a fixed price, not an estimate.

Get a free quote

Related advice

How we price non-slip bath coating

There are no hourly rates or hidden extras. The price is based on:

  • The colour and finish to match
  • Access to the area
  • The material
  • The type of damage

A few things move the price: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Send pictures and you’ll get a fixed figure.

Quotes from your pictures

When you take your pictures, these tips help us give you a firm price:

  • The postcode, so we can plan the visit
  • Daylight if possible, and no flash reflection
  • A picture taken from further back
  • Any earlier repairs or coatings

Email us pictures of the damage and one of the whole item, and tell us you’re in South Creake, and we’ll come back with a fixed quote.

Why repair rather than replace?

The alternatives are replacing the bath or tray with a textured one, or a bath mat, which traps water and needs cleaning. A non-slip coating treats your existing bath or tray. Most people are surprised how affordable a repair is, especially compared with replacing and refitting. Photos let us give you the exact figure.

Why book with us

  • Nothing taken out or refitted
  • Free fixed quotes from pictures
  • Straight answers about what a repair can do
  • Dust sheets down, tidy finish

Take a look at our pricing.

Signs you need non-slip bath coating in South Creake

Smooth surfaces are easy to clean, but with soap and water on them they become slippery. Textured areas on older baths wear smooth too.

Clients normally contact us about:

  • Worn-out textured areas
  • Safety for older or less mobile people
  • Bath mats that harbour mould or get forgotten
  • A bath or tray that is slippery when wet

Before booking anyone

  • What happens if they find more damage
  • Whether they match the colour on site
  • When it can be used again
  • What aftercare is recommended

10 questions to ask before booking

South Creake: your questions answered

What do you need from me?

Photos of the damage, a photo of the whole bath or shower tray and your postcode. Then we’ll agree a date.

What areas do you cover?

We cover the entire UK, including South Creake and the rest of Norfolk. Just include your postcode and we’ll offer you dates.

Is my repair covered?

Yes, for a year. If there is a problem with the work in that time, we come back and put it right.

Is there a call-out fee?

No. Our quotes include travel, with the same prices everywhere we work.

Can pets and children be at home?

Yes, as long as they stay out of the room we’re working in. We will tell you when the room can be used again.

I’m a tenant. Can you help?

We’re happy to deal with the tenant, landlord or agent. Just make sure the landlord agrees.

What happens if you find more damage?

We stop, show you and agree any change before carrying on. You won’t be charged for anything you haven’t agreed.

How soon can you come?

Your quote comes with available dates. Tell us if you need it done quickly.

Covering South Creake

South Creake is about 16 miles north-west of Dereham, in Norfolk. We work in every kind of home, from flats and terraces to detached houses and new builds, as well as offices, shops and holiday lets. Our technicians cover all 797 towns and villages across Norfolk, from the larger towns to small villages.

Our repair technicians cover all of NR21. From Back Street, Crockers Lane and Meadow Rise or a nearby road, we can come to you. You will find South Creake on the B1355, so it’s easy for us to reach. Nearby, we also work in North Creake (2 miles north), Waterden (2 miles east), Wicken Green Village (3 miles south-west), Syderstone (3 miles south-west) and West Barsham (3 miles south-east). Larger places within reach include Fakenham (5 miles south-east), Hunstanton (12 miles west), Holt (14 miles east), Heacham (11 miles west), Wells-next-the-Sea (6 miles north-east) and Dersingham (11 miles west).

Landmarks near South Creake

Locally, our jobs take us to homes close to Former Congregational Church, among other places.

Map of South Creake © OpenStreetMap contributors

Landlord and trade work in South Creake

For developers and builders, we fix damage before handover, so there is no need to replace a damaged item at the last minute. Several plots can be done in one visit to keep costs down.

Landlords, letting agents and housing providers in South Creake use us as well as homeowners. Repairing between tenancies keeps void periods short, and it usually costs far less than a refit.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.