Kirklees · England

Non-slip bath & shower coating in South Crosland, Kirklees

Non-slip bath coating in and around South Crosland: a fixed quote from photos, a tidy visit and a one-year guarantee.

  • Resurfaced baths that are now too smooth
  • A bath or tray that is slippery when wet
  • Worn-out textured areas
Surface Doctor technician refinishing the outside of a roll-top bath

Non-slip bath coating near South Crosland

What happens on the day

Visits start with a quick look at the job together, so there are no surprises. After that, protection goes down around the work area and we start. It normally takes a few hours.

  1. We clean and degrease the standing area.
  2. Next we mask off the area.
  3. We apply the clear textured coating.
  4. We remove the masking for a neat edge.
  5. Once it has cured, normally overnight, it’s ready.

Before we arrive

  • Move bottles, mats and clutter away from the area
  • Let us know if it has been repaired before
  • Make sure the room can be ventilated

Ask for a price

Email us photos of the damage and one of the entire item, and tell us you’re in South Crosland, and we will reply with a fixed quote.

Get a fixed price

Read more

Non-slip bath coating in South Crosland, done in place

The coating is clear and textured, so it shows only as a slightly matt area where you stand. It suits homes with older or less mobile people, holiday lets and families. Common call-outs are for bath mats that harbour mould or get forgotten and safety for older or less mobile people, on shower trays, enamelled baths and resurfaced baths.

Whatever the size of the job, you get the same one-year guarantee. A soft brush and mild cleaner keep it clean. Avoid scourers on the coating.

Area
South Crosland (HD9, HD4)
Region
Kirklees
Cover
12 months on all our work
Quote
Fixed and free, based on photos
Phone
0345 017 0787
Page updated
23 October 2026
Stained shower tray resurfaced to clean white, before and after

DIY repairs versus a professional job

For a hairline mark somewhere you will never see, a kit may be enough. For damage in plain view, cracks, holes or rust, or coloured finishes, a professional repair is worth it.

If you do try a kit, read the instructions carefully and work on a clean, dry surface, and don’t use it until it has fully cured. If it does not work out, we can still repair it properly.

Our work in South Crosland

South Crosland is about 2 miles east of Meltham, in Kirklees. We work in every kind of home, from flats and terraces to detached houses and new builds, as well as offices, shops and holiday lets. South Crosland is one of 189 places in Kirklees where we work. We work right across the region, from South Crosland to Leeds (about 18 miles away).

Jobs in HD9 and HD4 work the same way as everywhere else we cover. That includes homes on Meltham Road and Wood Bottom Road and the roads around them. Other places close to South Crosland include Netherton (1 mile north), Helme (1 mile west), Blackmoorfoot (2 miles north-west), Beaumont Park (2 miles north) and Linthwaite (2 miles north-west). We also work in nearby towns such as Huddersfield (3 miles north), Dewsbury (10 miles north-east), Batley (11 miles north-east), Mirfield (7 miles north-east), Liversedge (9 miles north-east) and Cleckheaton (9 miles north-east).

Landmarks near South Crosland

Around South Crosland, we work in homes near Church of the Holy Trinity, The Beaumont Arms and Honley High School. South Crosland’s nearest station is Honley station, about 1.6 miles east. Further afield, we also cover the area around David Brown Tractor Museum (1 mile south-west) and Piazza Centre (3.4 miles north-east). For a walk, there’s Oldfield Hill.

Map of South Crosland © OpenStreetMap contributors

What a repair cannot fix

Before you book, it’s worth knowing the limits too:

  • Surfaces that are already damaged or peeling (these need repairing first)
  • Textured areas still wet or recently cleaned with oily products
  • Outdoor surfaces

Not sure? Send pictures and we’ll give you a straight answer before booking.

Materials we repair

  • Shower trays
  • Wet room floors (ask us)
  • Enamelled baths
  • Acrylic baths
  • Resurfaced baths

Common questions in South Crosland

Can you repair something that is been repaired before?

Generally, yes. Tell us what was done before and we will plan for it.

Can you repair several things at once?

Yes, and it’s often cheaper. Just add the extra items to your photos and you will get one combined price.

When can you do it?

We’ll give you dates with your quote. If it’s urgent, say so and we’ll do what we can.

Can pets and children be at home?

Yes, as long as they stay out of the room we’re working in. We’ll tell you when the room can be used again.

Do you do work for letting agents?

We do, regularly. We can quote for several properties together and work between tenancies.

What does non-slip bath coating cost?

We give a fixed quote from your photos. Send a close-up and a picture of the entire item and your postcode.

Do the materials smell?

Some materials have a smell while they’re applied. It clears as the materials cure.

Is it messy?

Very little mess: we sheet and mask everything nearby, and we take our waste away with us.

Why repair rather than replace?

Instead, you could go for a new textured bath or tray, or a bath mat that needs lifting and cleaning. A non-slip coating treats your existing bath or tray. No two jobs are quite the same, so we price each one individually. The size and type of damage, the material and access all play a part, and combining jobs on one visit brings the cost down.

Why choose Surface Doctor in South Crosland

  • Accredited with CHAS, Constructionline and SafeContractor
  • Every repair guaranteed for a year
  • Normally one visit, start to finish
  • Straight answers about what a repair can do

See our full price list.

Common problems we fix in South Crosland

Baths and trays are made smooth so they’re easy to clean, yet with soap and water on them they become slippery. The textured patch on an older bath also wears down over time.

It’s worth getting a quote if you see:

  • Resurfaced baths that are now too smooth
  • A bath or tray that is slippery when wet
  • Bath mats that harbour mould or get forgotten
  • Worn-out textured areas

What your quote should include

  • How long it needs to cure
  • How changes to the job are handled
  • How to care for the finish
  • What the guarantee covers, and for how long

10 questions to ask before booking

What non-slip bath coating costs

We charge the same across the UK, including South Crosland. The price reflects:

  • Any earlier repairs that need removing first
  • Whether we combine several jobs
  • Where the damage is and how we get to it
  • How hard the colour is to match

The price reflects the work involved, not your postcode. You will see the full price before booking.

Getting a price from pictures

Two or three clear pictures are normally enough. Try to include:

  • One picture of the entire bath or shower tray
  • Any earlier repairs or coatings
  • Any details about the material
  • Your postcode, so we can check dates

A quote takes minutes to ask for: photograph the damage, then the whole bath or shower tray, add your postcode and send them over. You will get a fixed price, not an estimate.

Work for landlords and builders

For developers and builders, we fix damage before handover, so there is no need to replace a damaged item at the last minute. We can visit several plots in one trip.

We carry out planned and one-off repairs for housing associations and facilities teams in Kirklees and across the UK. Repairing in place avoids the disruption of a replacement, which is easier on the people living there.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.