Essex · England

Non-Slip Bath Coating in Stambourne Green

Non-slip bath coating for Stambourne Green, without a refit. Send us photos for a fixed price, then book a visit.

  • Bath mats that harbour mould or get forgotten
  • Worn-out textured areas
  • Resurfaced baths that are now too smooth
Surface Doctor technician refinishing the outside of a roll-top bath

Book non-slip bath coating in Stambourne Green

What affects the price in Stambourne Green

We price every job individually, from your photos. The main factors are:

  • The material and finish
  • What kind of damage it is
  • Previous DIY repairs that have to come out
  • Access to the area

Every job is a little different, so we price each one individually. What’s damaged, how badly and how easy it is to reach all play a part, and combining jobs on one visit brings the cost down.

How to get a fixed quote

Two or three clear pictures are usually enough. It helps if you send:

  • What it’s made of, if you know
  • A coin or ruler next to the damage for scale
  • One sharp close-up of the damage
  • One picture of the whole bath or shower tray

If you’re in Stambourne Green and want a price, the easiest route is photos: one close up, one from further back, plus your postcode. You’ll get a fixed quote with dates to choose from.

Non-slip bath coating in Stambourne Green, done in place

The coating is clear and textured, so it shows only as a slightly matt area where you stand. It suits homes with older or less mobile people, holiday lets and families. Common call-outs are for safety for older or less mobile people and worn-out textured areas, across enamelled baths, shower trays and wet room floors (ask us).

You are covered after we leave: our one-year guarantee applies to every job, and we will explain exactly what it covers when we quote. A soft brush and mild cleaner keep it clean. Avoid scourers on the coating.

Area
Stambourne Green (CO9)
Region
Essex
Cover
12 months on all our work
Quotes
Free and fixed, from your photos
Phone
0345 017 0787
Updated
23 October 2026
Stained shower tray resurfaced to clean white, before and after

When a repair is not the answer

To be straight with you, there are a few things a repair won’t fix:

  • Surfaces that are already damaged or peeling (these need repairing first)
  • Textured areas still wet or recently cleaned with oily products
  • Outdoor surfaces

If in doubt, send photos and we’ll say what we think before booking.

Materials we repair

  • Enamelled baths
  • Acrylic baths
  • Wet room floors (ask us)
  • Shower trays
  • Resurfaced baths

Signs you need non-slip bath coating in Stambourne Green

Baths and trays are made smooth so they’re easy to clean, yet wet, soapy surfaces are slippery. Textured areas on older baths wear smooth too.

It’s worth getting a quote if you see:

  • Safety for older or less mobile people
  • A bath or tray that is slippery when wet
  • Bath mats that harbour mould or get forgotten
  • Resurfaced baths that are now too smooth

What to look for in a quote

  • When it can be used again
  • Is the price fixed, and does it include VAT?
  • What prep work is covered
  • What happens if they find more damage

Our hiring checklist

Landlords, agents and businesses in Stambourne Green

Landlords, letting agents and housing providers in Stambourne Green use us as well as homeowners. Repairing between tenancies keeps void periods short, and it costs much less than replacing.

Hotels, guest houses and holiday lets cannot afford rooms out of action for long, so we keep visits short and tidy. We can work around your bookings.

Should I try a DIY kit first?

If you are set on a kit, follow its instructions closely and work on a clean, dry surface, and don’t use it until it has fully cured. If it doesn’t work out, we can still repair it properly.

Kits are cheap and easy to find, but the repairs we redo most frequently are DIY ones that have discoloured or lifted. Doing it properly first is generally the cheaper route.

Stambourne Green: your questions answered

It’s been repaired before. Can you still fix it?

Typically, yes. We remove the old repair before doing a new one.

Is the work guaranteed?

All our work carries a one-year guarantee. Ask us what it covers when you get your quote.

Do you hold any accreditations?

Yes, including CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.

What does non-slip bath coating cost?

The exact price depends on the damage, so we quote from photos. You will get a fixed figure before you book.

Do I need to be at home?

We need someone to let us in. You don’t need to watch us work.

How soon can you come?

Your quote comes with available dates. Tell us if you need it done quickly.

Do you cover Stambourne Green?

Yes. We work across the UK and travel to Stambourne Green. Send us pictures for a fixed quote, or call 0345 017 0787.

Will a non-slip coating change how my bath looks?

Only slightly: it shows as a matt area where you stand.

Covering Stambourne Green

Stambourne Green is about 5 miles south of Haverhill, in Essex. Across the CO9 area, we come to you. Stambourne Green is one of 644 places in Essex where we work. We work right across the region, from Stambourne Green to London (43 miles away).

All of CO9 is within our area. If you’re just outside Stambourne Green, we cover Craig's End (1 mile south-east), Cornish Hall End (2 miles south-west), Birdbrook (2 miles north), Steeple Bumpstead (2 miles north-west) and New England (3 miles north). Within a short drive, we also cover Braintree (10 miles south), Saffron Walden (10 miles west), Halstead (9 miles south-east), Great Dunmow (11 miles south-west), Stansted Mountfitchet (14 miles south-west) and Great Notley (11 miles south).

Local landmarks in Stambourne Green

Other landmarks nearby include Bumpstead Rural District (2.3 miles north) and Toppesfield Museum of The Working Horse (2.4 miles east).

Map of Stambourne Green © OpenStreetMap contributors

How the visit works

You don’t need to empty the room beforehand. We bring everything we need with us, lay protective sheets and start once you’re happy with the plan. Most jobs take a few hours, and you can get on with other things while we’re there.

  1. We start by degreasing the area where you stand.
  2. We mask out the area to be treated.
  3. We put on the clear non-slip coating.
  4. We lift the masking for a clean edge.
  5. The coating is left to cure before use, usually overnight.

How to prepare

  • Tell us if there are stairs or a lift
  • Make sure the area is dry
  • Clear the area around the damage

Getting a price

Getting a quote takes a couple of minutes: take one close-up and one wider shot of the bath or shower tray, add your postcode and send them over. You will get a fixed price, not an estimate.

Send pictures for a quote

Read more

Should you replace it?

The alternatives are a new textured bath or tray, or relying on a mat, which traps water and needs cleaning. A non-slip coating treats your existing bath or tray. What it costs depends on how much damage there is and what kind, the material and how many jobs we combine into one visit. We give a fixed price from your photos, so you know the cost before you book.

Why book with us

  • One visit for most repairs
  • Rooms protected and left tidy
  • Same prices wherever you are
  • Fixed prices from your photos

Take a look at our pricing.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.