Staffordshire · England
Non-slip bath & shower coating in Stanhope Bretby, Staffordshire
Fixed-price non-slip bath coating in Stanhope Bretby and the surrounding area, typically in one visit.
- Safety for older or less mobile people
- A bath or tray that is slippery when wet
- Resurfaced baths that are now too smooth
Should I try a DIY kit first?
What a professional repair adds is preparation, colour matching and finishing. We prepare the area properly, mix the colour on site and polish the finish to match, and the work is guaranteed.
For a hairline mark somewhere you’ll never see, a kit may be enough. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, a professional repair is worth it.
Non-slip bath coating in Stanhope Bretby without replacing anything
It suits older people, families and holiday lets. It’s a clear, textured coating, so the bath looks much the same. Our repair technicians work on wet room floors (ask us), resurfaced baths and acrylic baths, and common reasons people get in touch are a bath or tray that is slippery when wet and worn-out textured areas.
The work is covered for a year after we finish. Just call us if there’s a problem and we will come back. Clean with a soft brush and a mild cleaner. Avoid scourers on the coating.
- Location
- Stanhope Bretby (DE15)
- County
- Staffordshire
- Guarantee
- One year on every repair
- Quote
- Free, fixed price from pictures
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
What we can’t put right
A repair isn’t right for every job, for example:
- Surfaces that are already damaged or peeling (these need repairing first)
- Textured areas still wet or recently cleaned with oily products
- Outdoor surfaces
Send us pictures and we’ll tell you honestly before you book.
Materials we repair
- Resurfaced baths
- Enamelled baths
- Wet room floors (ask us)
- Shower trays
- Acrylic baths
The process
We agree an arrival time beforehand, so you know when to expect us. Once we are there, the work takes a few hours. We leave the room clean and ready to use once it has cured.
- First the standing area is cleaned and degreased.
- We mask out the area to be treated.
- The clear textured coating is applied.
- We remove the masking for a neat edge.
- We leave it to cure, typically overnight.
Before we arrive
- Let us know about parking or access
- Have somewhere for us to park nearby if possible
- Mention if the room is upstairs or in a flat
How to get a price
Ring 0345 017 0787, or send us photos through the quote form. With a clear picture of the damage and one of the entire bath or shower tray, we can price the job.
Related advice
Should you replace it?
The alternatives are replacing the bath or tray with a textured one, or a bath mat that needs lifting and cleaning. A non-slip coating treats your existing bath or tray. A repair typically costs much less than people expect, particularly next to the cost of replacement. Send pictures and we’ll give you the exact figure.
Why book with us
- We will tell you if it’s not worth repairing
- Everything repaired in place
- A fixed quote before you book
- No extra charge for your area
See our full price list.
Landlord and trade work in Stanhope Bretby
We regularly price jobs from inventory or check-out pictures. You can have a price before you arrange access, and we can arrange access with the tenant directly if that helps.
Hotels, guest houses and holiday lets cannot afford rooms out of action for long, so most of our work is done in a single visit. We can work around your bookings.
What non-slip bath coating costs
There is no area surcharge for Stanhope Bretby. What changes the price is:
- How much damage there is
- The material
- Whether it’s a chip, crack, burn or wear
- Whether old repairs or coatings need taking off
Compared with replacing, a repair is usually a fraction of the price, because there is no removal, plumbing or making good. Your fixed quote shows exactly what’s included.
How to get a fixed price
You can take the photos on your phone. Ensure they show:
- Daylight if possible, and no flash reflection
- A wider photo showing the whole bath or shower tray
- A clear, close picture of the problem area
- Something in shot to show the size
No survey visit is needed: we price from photos. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through, and you’ll get a fixed figure back.
Your questions about non-slip bath coating in Stanhope Bretby
Is repairing better than replacing?
Generally, yes. A repair skips the removal, fitting and redecorating. If it is not worth repairing, we’ll tell you.
Do you hold any accreditations?
We’re accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.
Do you cover Stanhope Bretby?
We do. We send a technician to Stanhope Bretby for every job, and the price is the same as everywhere else.
Is there any odour?
There can be some smell while we work. It fades as everything cures.
Is there a call-out fee?
Travel is included in the price, with the same prices everywhere we work.
Will the price change on the day?
Your quote covers the damage in the photos. Anything extra is discussed before we begin.
Do I have to be there?
We need someone to let us in. After that, you can carry on with your day.
What information do you need?
Send photos through the quote form or call 0345 017 0787.
Nearby places to Stanhope Bretby
Also in Stanhope Bretby
About Stanhope Bretby
Stanhope Bretby is about 1 mile north-west of Swadlincote, in Staffordshire. We travel to customers in Stanhope Bretby and the surrounding area, so there’s no workshop to go to. We cover all 512 towns and villages in Staffordshire. Our nearest city page is Birmingham, about 26 miles away.
All of DE15 is within our area, from the main roads to the quietest streets. Nearby, we also work in Newhall (1 mile south), Upper Midway (1 mile south-east), Swadlincote (1 mile south-east), Midway (2 miles south-east) and Lower Midway (2 miles south-east). Larger places within reach include Burton upon Trent (3 miles west), Tamworth (12 miles south), Lichfield (13 miles south-west), Rugeley (15 miles west), Uttoxeter (14 miles north-west) and Horninglow (3 miles north-west).
Near you in Stanhope Bretby
In Stanhope Bretby, that means homes near Stapenhill Gardens, William Allitt School and Church of St Wystan and the streets around them. Also close by are Newhall Infant School (0.6 miles south), William Allitt School (0.6 miles south) and Chesterfield Arms (0.5 miles south-east). The nearest railway station is Burton-On-Trent station, roughly 2.8 miles west. Further afield, we also cover the area around Burton upon Trent Infirmary (2.5 miles west) and Sharpe's Pottery Museum (1.8 miles south-east).
Do you need non-slip bath coating in Stanhope Bretby?
Baths and trays are made smooth so they’re easy to clean, yet with soap and water on them they become slippery. Textured areas on older baths wear smooth too.
Keep an eye out for any of the following:
- A bath or tray that is slippery when wet
- Resurfaced baths that are now too smooth
- Safety for older or less mobile people
- Worn-out textured areas
Questions to ask before booking
- Who turns up on the day
- What aftercare is recommended
- Whether the price is fixed and includes VAT
- Whether there are any call-out or travel charges
About our accreditations · Every repair comes with a one-year guarantee.
