Staffordshire · England

Non-Slip Bath Coating in Uttoxeter

Non-slip bath coating across Uttoxeter and nearby, done in a single visit in most cases.

  • Resurfaced baths that are now too smooth
  • A bath or tray that is slippery when wet
  • Bath mats that harbour mould or get forgotten
Surface Doctor technician refinishing the outside of a roll-top bath

Non-slip bath coating for Uttoxeter homes

How we handle non-slip bath coating in Uttoxeter

The coating is clear and textured, so it shows only as a slightly matt area where you stand. It suits older people, families and holiday lets. Our technicians work on acrylic baths, enamelled baths and shower trays, and common reasons people get in touch are resurfaced baths that are now too smooth and safety for older or less mobile people.

We stand behind the work with a one-year guarantee, so you are not left on your own once we have gone. Clean with a soft brush and a mild cleaner. Don’t use abrasive pads on the textured area.

Before and after: an old shower tray refinished by Surface Doctor
Where
Uttoxeter (ST14)
Area hub
Staffordshire
Warranty
One year on every repair
Quotes
Free and fixed, from your photos
Telephone
0345 017 0787
Page updated
23 October 2026

About Uttoxeter

Uttoxeter is about 12 miles north-west of Burton upon Trent, in Staffordshire. Customers in Uttoxeter get the same service as everywhere else we cover: a fixed price from your pictures, then a visit to do the work. Our repair technicians cover 512 places in Staffordshire. We work right across the region, from Uttoxeter to Birmingham (about 30 miles away).

Jobs in ST14 work the same way as everywhere else we cover. Streets in the area include High Street, Market Place and Market Street, all of which we cover. You will find Uttoxeter on the A518 and A522, so it’s easy for us to reach. If you are just outside Uttoxeter, we cover The Heath (1 mile north), Spath (1 mile north), Stramshall (1 mile north), Doveridge (2 miles east) and Waldley (3 miles north-east). Further out, we also cover Stafford (12 miles south-west), Burton upon Trent (12 miles south-east), Cannock (15 miles south-west), Lichfield (15 miles south), Longton (12 miles north-west) and Rugeley (10 miles south).

Around Uttoxeter

In Uttoxeter, that means homes near Heath Mission Church, Wellington Inn and St Joseph's Catholic Primary School and the streets around them. The nearest railway station is Uttoxeter station, roughly 0.7 miles south-east of the centre. Nearby you will also find Redfern's Cottage (less than half a mile south-east).

Map of Uttoxeter © OpenStreetMap contributors

What we can’t put right

A repair is not right for every job, including:

  • Surfaces that are already damaged or peeling (these need repairing first)
  • Textured areas still wet or recently cleaned with oily products
  • Outdoor surfaces

If in doubt, send pictures and we’ll say what we think before booking.

What we work on

  • Resurfaced baths
  • Enamelled baths
  • Shower trays
  • Wet room floors (ask us)
  • Acrylic baths

DIY kit or professional repair?

The difference between a kit and a professional repair is mostly in the preparation and colour. We prepare the area properly, mix the colour on site and polish the finish to match, then guarantee it for a year.

Kits are cheap and easy to find, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is typically the cheaper route.

Repairing versus replacing in Uttoxeter

Instead, you could go for a new textured bath or tray, or relying on a mat that needs lifting and cleaning. A coating adds grip to the bath you have. Compared with replacing, repairing usually costs far less, because there’s no removal, plumbing or making good. Your fixed quote shows exactly what’s included.

Why Uttoxeter customers choose us

  • Free fixed quotes from pictures
  • We come to you, anywhere in the UK
  • We’ll tell you if it’s not worth repairing
  • No extra charge for your area

Take a look at our pricing.

How the visit works

A typical visit goes like this: we arrive at the agreed slot, protect everything around the work area, carry out the work and clear up. Allow a morning or an afternoon from start to finish. Before we go, we’ll explain how long to leave it and how to look after it.

  1. We clean and degrease the standing area.
  2. Next we mask off the area.
  3. The clear textured coating is applied.
  4. We remove the masking for a neat edge.
  5. Once it has cured, normally overnight, it’s ready.

How to prepare

  • Point us to the nearest place to park
  • Let us know which floor the room is on
  • Plan for the room to be out of bounds to pets and children

How to get a price

Getting a price is easy: take a close-up of the damage and a picture from further back, send them over with your postcode, and we’ll reply with a fixed price. Quotes are free and you’re under no obligation.

Get a free quote

Related advice

What non-slip bath coating costs

There are no hourly rates or hidden extras. The price is based on:

  • The material and finish
  • The type of damage
  • Previous DIY repairs that have to come out
  • How much damage there is

Every job is a little different, so we price each one individually. What’s damaged, how badly and how easy it is to reach all make a difference, and combining jobs on one visit brings the cost down.

Send photos for a quote

The better the pictures, the more accurate the price. Here’s what we find most useful:

  • One picture of the entire bath or shower tray
  • One sharp close-up of the damage
  • Where you are, by postcode
  • What it’s made of, if you know

A quote takes minutes to ask for: photograph the damage, then the entire bath or shower tray, include your postcode and send them to us. You will get a fixed quote, not an estimate.

Do you need non-slip bath coating in Uttoxeter?

Baths and trays are made smooth so they’re easy to clean, yet with soap and water on them they become slippery. The textured patch on an older bath also wears down over time.

Send us a photo if you notice any of these:

  • Resurfaced baths that are now too smooth
  • Safety for older or less mobile people
  • Worn-out textured areas
  • A bath or tray that is slippery when wet

Comparing quotes

  • Who will actually do the work
  • Whether there are any call-out or travel charges
  • How soon you can use it again
  • How long the guarantee is and what it covers

10 questions to ask before booking

For landlords and businesses

We are used to working with agents and managing companies. Just send photos, the address and how to get access and we will handle the rest.

We also carry out snagging repairs for builders and developers, fixing chips and scratches before handover so nothing needs replacing. We are CHAS, Constructionline and SafeContractor accredited.

FAQs for Uttoxeter

Will you leave a mess?

No. The work area is masked and covered, and we leave the room clean.

Will the price change on the day?

Your quote covers the damage in the photos. Anything extra is discussed before we begin.

Can you do more than one item on the same visit?

Yes, and it’s often cheaper. Send pictures of everything together and you’ll get one combined price.

Are you a vetted contractor?

We are accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.

Will I see the coating?

Only slightly: the treated area looks slightly matt.

Is there a guarantee?

Every repair comes with our one-year guarantee. We will explain what it covers when we quote.

Do you cover Uttoxeter?

Yes. We cover the whole UK and come to Uttoxeter. Send photos and we will quote, or call 0345 017 0787.

Can you price it without visiting?

Yes, almost always. A close-up and a wider photo are enough to give a fixed price.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.