Somerset · England

Non-Slip Bath Coating for Stogumber homes

Non-slip bath coating for Stogumber, without a refit. Get a fixed price from your photos, then we come to you.

  • A bath or tray that is slippery when wet
  • Bath mats that harbour mould or get forgotten
  • Safety for older or less mobile people
Surface Doctor technician refinishing the outside of a roll-top bath

Trusted non-slip bath coating in Stogumber

About our non-slip bath coating in Stogumber

The coating is clear and textured, so the bath looks much the same. It’s popular with older people, families and holiday lets. If you are dealing with a bath or tray that is slippery when wet and worn-out textured areas, we can normally put it right, on wet room floors (ask us), shower trays and acrylic baths alike.

The work is guaranteed for twelve months. If something is not right in that time, we come back and put it right. A soft brush and mild cleaner keep it clean. Do not use abrasive pads on the textured area.

Discoloured square shower tray restored with a new white finish
Area
Stogumber (TA4)
Region
Somerset
Guarantee
12 months on all our work
Price
Free, fixed price from pictures
Phone
0345 017 0787
Updated
23 October 2026

How it works

Nothing needs to be moved out of the room beforehand. Everything we use comes in the van with us, lay protective sheets and get going once we’ve agreed what we’re doing. Most jobs take a few hours, and you can get on with other things while we are there.

  1. We clean and degrease the standing area.
  2. Next we mask off the area.
  3. We apply the clear textured coating.
  4. The masking comes off to leave a neat edge.
  5. The coating is left to cure before use, typically overnight.

How to prepare

  • Plan for the room to be out of bounds to pets and children
  • Clear the area around the damage
  • Let us know if it has been repaired before

How to get a price

Pricing is simple: snap the damage close up and then the whole item, send them to us with your postcode, and you will get a fixed price back. Quotes are free and no obligation.

Get a fixed price

Read more

Do you need non-slip bath coating in Stogumber?

Baths and trays are made smooth so they’re easy to clean, yet wet, soapy surfaces are slippery. The textured patch on an older bath also wears down over time.

You may need us if you’ve spotted:

  • A bath or tray that is slippery when wet
  • Worn-out textured areas
  • Bath mats that harbour mould or get forgotten
  • Safety for older or less mobile people

What your quote should include

  • Whether the price covers travel
  • Who will actually do the work
  • Whether the price is fixed and includes VAT
  • Whether the colour is mixed to match

Our hiring checklist

What non-slip bath coating costs

You will know the full cost before booking. We look at:

  • Whether we combine several jobs
  • The size and number of damaged areas
  • Previous DIY repairs that have to come out
  • The material and finish

What it costs depends on the type and amount of damage, what it’s made of and how many jobs we combine into one visit. You get a fixed price from your photos, so you know the cost before you book.

Quotes from your photos

Phone pictures are fine. Just ensure we can see:

  • Good light, ideally daylight, without flash glare
  • The material, if you know it
  • Your postcode, so we can check dates
  • A close-up of the damage, in focus

No survey visit is needed: we price from photos. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through, and you will get a fixed figure back.

DIY kit or professional repair?

What a professional repair adds is preparation, colour matching and finishing. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, and the work is guaranteed.

It’s tempting to reach for a kit, but the repairs we redo most frequently are DIY ones that have discoloured or lifted. Doing it properly first is normally the cheaper route.

FAQs for Stogumber

What happens next?

We check the damage, the material and your postcode, then reply with a quote.

Will a non-slip coating change how my bath looks?

Very little: it shows as a matt area where you stand.

What do you need from me?

Some photos, your postcode and how to reach you. On the day, access to the room.

Are you a vetted contractor?

We’re accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.

It’s been repaired before. Can you still fix it?

Most of the time. Let us know what was used before and we’ll plan for it.

Do you charge for travel?

There’s no separate call-out charge. The fixed quote covers the visit and the work.

Is repairing better than replacing?

Generally, yes. Replacement brings removal, refitting and making good, which a repair avoids. If it isn’t worth repairing, we’ll tell you.

I’m a tenant. Can you help?

Yes. Check with your landlord; we can send the quote to them too.

Repair or replace in Stogumber?

Instead, you could go for a new textured bath or tray, or relying on a mat that needs lifting and cleaning. A non-slip coating treats your existing bath or tray. The price reflects the work involved, not your postcode. You’ll see the full price before booking.

Why Stogumber clients choose us

  • A year’s guarantee on all work
  • Straight answers about what a repair can do
  • One visit for most repairs
  • Accredited with CHAS, Constructionline and SafeContractor

Take a look at our full price list.

Honest limits

Honesty matters more than a booking, so here’s what a repair cannot fix:

  • Surfaces that are already damaged or peeling (these need repairing first)
  • Textured areas still wet or recently cleaned with oily products
  • Outdoor surfaces

Send us pictures and we will tell you honestly before booking.

Materials we work on in Stogumber

  • Wet room floors (ask us)
  • Shower trays
  • Acrylic baths
  • Resurfaced baths
  • Enamelled baths

Landlord and trade work in Stogumber

For anyone letting property in or around Stogumber, we will quote for several properties at once. Send pictures for each one and we will come back with a combined price.

We carry out planned and one-off repairs for housing associations and facilities teams. A repair avoids taking out and refitting, which is easier on the people living there.

Our work in Stogumber

Stogumber is about 10 miles south-east of Minehead, in Somerset. Jobs in Stogumber are booked in like any other job: a fixed quote from photos, then a visit to do the work. We work in 640 places in Somerset, from the larger towns to small villages.

Here we cover the TA4 postcode area. From Station Road, High Street and Deane Close or a nearby road, we can come to you. Nearby, we also work in Kingswood (1 mile north-east), Preston (1 mile south), Culverhays (1 mile north-east), Vellow (1 mile north) and Newton (1 mile north-east). We also work in nearby towns such as Taunton (11 miles south-east), Bridgwater (12 miles east), Minehead (10 miles north-west), Burnham-on-Sea (15 miles north-east), Wellington (10 miles south) and Sydenham (13 miles east).

Near you in Stogumber

Our clients here include homes close to The White Horse Inn, Church of St Mary and Stogumber CofE Primary School. Further afield, we also cover the area around Bakelite Museum (2.7 miles north-west). Green spaces nearby include Wills Neck.

Map of Stogumber © OpenStreetMap contributors
CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.