Vale of Glamorgan · Wales
Non-Slip Bath Coating for The Herberts homes
Local non-slip bath coating for The Herberts: a fixed quote from photos, a tidy visit and a one-year guarantee.
- Bath mats that harbour mould or get forgotten
- Worn-out textured areas
- Safety for older or less mobile people

What we’re called out for in The Herberts
Baths and trays are made smooth so they’re easy to clean, yet wet, soapy surfaces are slippery. Textured areas on older baths wear smooth too.
It’s worth getting a quote if you see:
- Safety for older or less mobile people
- A bath or tray that is slippery when wet
- Bath mats that harbour mould or get forgotten
- Resurfaced baths that are now too smooth
Before booking anyone
- How the room is protected while they work
- Whether the price is fixed and includes VAT
- Whether they match the colour on site
- Whether the price covers travel
Non-slip bath coating in The Herberts, done in place
The coating is clear and textured, so the bath looks much the same. It suits homes with older or less mobile people, holiday lets and families. Common call-outs are for resurfaced baths that are now too smooth and safety for older or less mobile people, across enamelled baths, acrylic baths and resurfaced baths.
All our work is covered by our one-year guarantee. A soft brush and mild cleaner keep it clean. Do not use abrasive pads on the textured area.

- Location
- The Herberts (CF71)
- Area hub
- Vale of Glamorgan
- Warranty
- One year on every repair
- Price
- Free, fixed price from pictures
- Call
- 0345 017 0787
- Updated
- 23 October 2026
Places near The Herberts
Also in The Herberts
What happens on the day
We begin by going over the job with you, so there are no surprises. Then the area is sheeted and masked and we start. Allow a morning or an afternoon, and we will keep you posted as we go.
- First the standing area is cleaned and degreased.
- Next we mask off the area.
- The clear textured coating is applied.
- The masking comes off to leave a neat edge.
- Once it has cured, normally overnight, it’s ready.
How to prepare
- Tell us about any previous repairs or coatings
- Let us know which floor the room is on
- Move bottles, mats and clutter away from the area
How to get a price
There’s no need for us to visit first. Photos are enough for us to price nearly every job: send a close-up, a wider shot and your postcode, and we’ll reply with a fixed quote.
Read more
Questions from The Herberts
Is it safe with children and pets around?
Keep pets and children away from the work area on the day, so the repair is not disturbed while it cures.
Will I see the coating?
Very little: the treated area looks slightly matt.
How much does non-slip bath coating cost in The Herberts?
We give a fixed price based on photos of the damage. Send a close-up of the damage and a wider photo with your CF71 postcode.
Can landlords book you?
We do, regularly. We can quote for several properties together and work between tenancies.
Do you hold any accreditations?
Yes. Our accreditations include CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.
Is there any odour?
There can be some smell while we work, which is why we ventilate. It clears as the materials cure.
What happens next?
We look at the pictures and reply with a fixed price and some dates. If anything’s unclear, we’ll ask for another photo.
What if the damage is worse than the photos show?
We stop, show you and agree any change before carrying on. You won’t be charged for anything you haven’t agreed.
What a repair can’t fix
Some problems need a builder, plumber or fitter rather than us:
- Surfaces that are already damaged or peeling (these need repairing first)
- Textured areas still wet or recently cleaned with oily products
- Outdoor surfaces
If in doubt, send photos and we’ll say what we think.
Materials we work on in The Herberts
- Acrylic baths
- Wet room floors (ask us)
- Shower trays
- Enamelled baths
- Resurfaced baths
DIY repairs versus a professional job
It’s tempting to reach for a kit, but the repairs we redo most frequently are DIY ones that have discoloured or lifted. Doing it properly first is usually the cheaper route.
If you do try a kit, read the instructions carefully, ensure the area is clean and completely dry, and do not use it until it has fully cured. If it fails, we can still put it right.
What non-slip bath coating costs
We price every job individually, from your pictures. The main factors are:
- The material
- Whether it’s a chip, crack, burn or wear
- Doing more than one item at once
- Previous DIY repairs that have to come out
The price depends on how much damage there is and what kind, the material and how many items we do on one visit. We give a fixed quote from your pictures, so there are no surprises on the day.
How to get a fixed price
We price nearly every job from photos. This is what to send:
- A coin beside the damage so we can judge size
- Any details about the material
- A close-up of the damage, in focus
- Good light, ideally daylight, without flash glare
For a price in The Herberts, the easiest route is pictures: a close-up, a wider shot and your postcode. You will get a fixed quote with dates to choose from.
Work for landlords and builders
Letting agents often send us pictures straight from the inventory. That means we can quote before you even visit the property, and we liaise with tenants about access if you’d like us to.
We are used to working with agents and managing companies. Just send photos, the address and how to get access and we’ll arrange it.
Repair or replace: which is better?
Instead, you could go for a new textured bath or tray, or a bath mat that needs lifting and cleaning. A coating adds grip to the bath you have. Compared with replacing, repairing typically costs far less, because there’s no removal, plumbing or making good. The quote lists exactly what you’re paying for.
Why us?
- Dust sheets down, tidy finish
- CHAS, Constructionline and SafeContractor accredited
- Nothing taken out or refitted
- Most jobs done in one visit
Read our pricing.
The Herberts and nearby
The Herberts is about 6 miles south-east of Pencoed, in the Vale of Glamorgan. Wherever you are in the CF71 postcode area, a technician comes to you. Our repair technicians cover 67 places across the Vale of Glamorgan, from the larger towns to small villages.
Here we cover the CF71 postcode area. We also cover the places around The Herberts: Llandough (1 mile north), Llandoche (1 mile north), Llan-fair (1 mile south-east), Llanblethian (1 mile north-west) and East Village (1 mile north). Larger places within reach include Barry (8 miles east), Penarth (11 miles east), Gibbonsdown (8 miles east), Cadoxton (8 miles east), Dinas Powys (10 miles east) and Llantwit Major (3 miles south-west).
What’s near The Herberts
We visit homes around St Dochdwy's Church, Llanfair C.P. School and Cowbridge Comprehensive School, among other places. For rail, the closest station is Llantwit Major station, about 2.7 miles south-west of the centre. Well-known places in the area include Llandough Castle (under half a mile north) and Cowbridge and District Museum (1.3 miles north). The countryside around The Herberts includes Bryn Owen and Walls Pool.
About our accreditations · Every repair comes with a one-year guarantee.

