South Lanarkshire · Scotland
Non-Slip Bath Coating in The Murray
Non-slip bath coating in The Murray without the cost of replacing. Send us photos for a fixed quote, then we come to you.
- Bath mats that harbour mould or get forgotten
- Worn-out textured areas
- Safety for older or less mobile people
How we handle non-slip bath coating in The Murray
It suits older people, families and holiday lets. It’s a clear, textured coating, so it shows only as a slightly matt area where you stand. Our repair technicians work on acrylic baths, enamelled baths and shower trays, and common reasons people contact us are resurfaced baths that are now too smooth and safety for older or less mobile people.
We stand behind the work with a one-year guarantee, so you are not left on your own once we’ve gone. Clean with a soft brush and a mild cleaner. Avoid scourers on the coating.
- Where
- The Murray (G75, G74)
- Area hub
- South Lanarkshire
- Warranty
- 12 months on all our work
- Quote
- Free and fixed, from your pictures
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
What we’re called out for in The Murray
Smooth surfaces are easy to clean, but wet, soapy surfaces are slippery. The textured patch on an older bath also wears down over time.
Contact us if you’ve noticed any of these:
- Safety for older or less mobile people
- Bath mats that harbour mould or get forgotten
- Worn-out textured areas
- Resurfaced baths that are now too smooth
Before you book anyone
- When it can be used again
- The length of the guarantee and what it covers
- What preparation is included
- How the room is protected while they work
What non-slip bath coating costs
You’ll know the full cost before you book. We look at:
- Access to the area
- How hard the colour is to match
- Whether old repairs or coatings need taking off
- The material and finish
A repair is priced on what needs doing, not where you live. You’ll see the full price before booking, with no extras added later.
Getting a price from pictures
Almost every job we do is priced from pictures. This is what to send:
- A photo taken from further back
- The postcode, so we can plan the visit
- Details of any past repairs
- A coin or ruler next to the damage for scale
Getting a quote takes a couple of minutes: photograph the damage, then the entire bath or shower tray, include your postcode and send them to us. You’ll get a fixed quote, not an estimate.
The process
Here’s how a visit generally runs: we arrive at the agreed slot, sheet and mask the area around the job, do the job and tidy away. Plan for a few hours from start to finish. Before we go, we’ll explain when it can be used and what to avoid for the first few days.
- We clean and degrease the standing area.
- We mask out the area to be treated.
- The clear textured coating is applied.
- The masking comes off to leave a neat edge.
- We leave it to cure, usually overnight.
How to prepare
- Tell us about parking, stairs or access
- Keep pets and children out of the room while we work
- Mention any earlier repairs or resurfacing
Get a quote
There is no need for us to visit first. Nearly every job can be priced from photos: we need a close-up, a wider picture and your postcode, and we’ll reply with a fixed price.
Read more
About The Murray
The Murray is about 1 mile east of East Kilbride, in South Lanarkshire. We travel to clients in The Murray and the surrounding area, so there’s no workshop to go to. The Murray is one of 139 towns and villages in South Lanarkshire where we work. You can also see our page for Glasgow, about 8 miles away.
Our visits in G75 and G74 are booked in the same way as anywhere else. Whether you live on Cullen Road, Darwin Road and Owen Avenue or anywhere nearby, we can come to you. You will find The Murray on the A726, so it’s easy for us to reach. If you’re just outside The Murray, we cover East Kilbride (1 mile west), West Mains (1 mile north), Greenhills (1 mile south-west), The Village (1 mile north-east) and Birniehill (1 mile east). Larger places within reach include Hamilton (5 miles east), Cambuslang (5 miles north), Uddingston (6 miles north-east), Blantyre (4 miles north-east), Larkhall (8 miles east) and Carluke (14 miles east).
What’s near The Murray
Typical jobs here are in homes near St Andrew's and St Bride's High School, The Hay Stook pub and Mount Cameron Primary School. The Murray’s nearest station is East Kilbride station, about 0.7 miles north. Further afield, we also cover the area around Hairmyres Hospital (1.5 miles west) and Mains Castle (1.5 miles north). Not far away are Cathkin Braes.
Work for landlords and builders
We regularly price jobs from inventory or check-out photos. You can have a price before you arrange access, and we can arrange access with the tenant directly if that helps.
For anyone letting property in or around The Murray, we can repair and quote for several addresses together. Just send pictures for each address and we’ll come back with a combined price.
Towns and villages near The Murray
More services for The Murray
Repair or replace: which is better?
Instead, you could go for replacing the bath or tray with a textured one, or a bath mat that needs lifting and cleaning. A non-slip coating adds grip to the bath you have. The price depends on how much damage there is and what kind, the material and how many items we do on one visit. You get a fixed price from your pictures, so there are no surprises on the day.
Why us?
- We come to you, anywhere in the UK
- We leave the room as we found it
- One price list for the whole UK
- Honest advice, even when it means no job
Read our full price list.
When a repair isn’t the answer
A repair isn’t right for every job, including:
- Surfaces that are already damaged or peeling (these need repairing first)
- Textured areas still wet or recently cleaned with oily products
- Outdoor surfaces
Send us pictures and we will tell you honestly before booking.
What we work on
- Enamelled baths
- Shower trays
- Resurfaced baths
- Acrylic baths
- Wet room floors (ask us)
DIY kit or professional repair?
We understand the appeal of fixing it yourself. The trouble is that kit repairs frequently look fine at first and then fail, and then the old filler has to be removed first.
If you are set on a kit, follow its instructions closely and work on a clean, dry surface, and don’t use it until it has fully cured. If it fails, we can still put it right.
The Murray questions
How do I clean it?
Yes. A soft brush and mild cleaner is all it needs.
Do you hold any accreditations?
Yes. Our accreditations include CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.
Will a non-slip coating change how my bath looks?
Very little: the treated area looks slightly matt.
Can I add another job to the visit?
Yes, and it’s often cheaper. Send pictures of everything together and you’ll get one combined price.
Do you charge for travel?
No. Our quotes include travel, with the same prices everywhere we work.
What does non-slip bath coating cost?
The exact price depends on the damage, so we quote from photos. You will get a fixed figure before you book.
Will the price change on the day?
It’s rare, but if it happens we talk to you first. You decide whether to go ahead.
Can you repair something that is been repaired before?
Typically, yes. We remove the old repair before doing a new one.
About our accreditations · Every repair comes with a one-year guarantee.
