Na h-Eileanan Siar · Scotland

Non-slip bath & shower coating in Timsgarry, Na h-Eileanan Siar

Clear non-slip coatings for baths and shower trays in Timsgarry, carried out at your home and guaranteed for a year.

  • Resurfaced baths that are now too smooth
  • Safety for older or less mobile people
  • Bath mats that harbour mould or get forgotten
Surface Doctor technician refinishing the outside of a roll-top bath

Book non-slip bath coating in Timsgarry

Non-slip bath coating at your home in Timsgarry

It suits homes with older or less mobile people, holiday lets and families. The coating is clear and textured, so the bath looks much the same. If you are dealing with safety for older or less mobile people and bath mats that harbour mould or get forgotten, we can typically put it right, whatever the material.

The work is covered for a year after we finish. Just call us if there’s a problem and we will come back. A soft brush and mild cleaner keep it clean. Don’t use abrasive pads on the textured area.

Area
Timsgarry (HS2)
Region
Na h-Eileanan Siar
Warranty
12 months on all our work
Price
Free and fixed, from your photos
Call
0345 017 0787
Last updated
23 October 2026
Stained shower tray resurfaced to clean white, before and after

What we are called out for in Timsgarry

Smooth surfaces are easy to clean, but with soap and water on them they become slippery. The textured patch on an older bath also wears down over time.

People typically call us when they notice one of these:

  • A bath or tray that is slippery when wet
  • Worn-out textured areas
  • Bath mats that harbour mould or get forgotten
  • Resurfaced baths that are now too smooth

Questions to ask before booking

  • How the colour is matched
  • What preparation is included
  • What happens if the damage is worse than the photos show
  • How long it needs to cure

10 questions to ask before booking

Common questions in Timsgarry

What does non-slip bath coating cost?

Every job gets a fixed price from your pictures. Send a close-up and a picture of the entire item with your HS2 postcode.

Are you a vetted contractor?

We are accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.

Can I get a quote without a visit?

In nearly every case. We only ask to see it in person if the pictures cannot show what we need.

Do you work in Timsgarry?

Yes. We cover the entire UK and come to Timsgarry and the rest of Na h-Eileanan Siar. Send pictures and we will quote, or call 0345 017 0787.

Will a non-slip coating change how my bath looks?

Very little: the treated area looks slightly matt.

Will you leave a mess?

We protect the room with dust sheets and masking first, and we clean up when we’ve finished.

I’m a tenant. Can you help?

Of course. Check with your landlord; we can send the quote to them too.

Is the work guaranteed?

Yes: twelve months. If anything goes wrong with the repair within the year, we return to fix it.

Repairing versus replacing in Timsgarry

The alternatives are replacing the bath or tray with a textured one, or a bath mat that needs lifting and cleaning. A coating adds grip to the bath you have. The price reflects the work involved, not your postcode. You’ll see the full price before you book, with nothing added on the day.

Why book with us

  • Everything repaired in place
  • Fixed prices from your photos
  • A year’s guarantee on all work
  • Straight answers about what a repair can do

Take a look at our prices page.

What we cannot put right

It helps to know what we cannot do:

  • Surfaces that are already damaged or peeling (these need repairing first)
  • Textured areas still wet or recently cleaned with oily products
  • Outdoor surfaces

Send us photos and we’ll tell you honestly.

What we work on

  • Shower trays
  • Resurfaced baths
  • Acrylic baths
  • Wet room floors (ask us)
  • Enamelled baths

Landlords, agents and businesses in Timsgarry

We carry out planned and one-off repairs for housing associations and facilities teams in Na h-Eileanan Siar and across the UK. A repair avoids taking out and refitting, which matters when someone is living in the home.

Rental properties take more wear, and replacing things at every changeover adds up. Repairing between tenants keeps the property presentable for less.

Timsgarry and nearby

Timsgarry (Gaelic: Timsgearraidh) is in Na h-Eileanan Siar. We work in every kind of home, old or new, large or small, plus businesses and rented homes. Our repair technicians cover 87 places in Na h-Eileanan Siar, from the larger towns to small villages.

Jobs in HS2 work the same way as everywhere else we cover. Neighbouring places we cover include Breasclete (10 miles east), Na Gearrannan (11 miles north-east), Carloway (11 miles north-east), Shawbost (14 miles north-east) and Baile Ailein (17 miles south-east). For island and remote addresses, call first so we can plan the visit.

Local landmarks in Timsgarry

We visit homes around Uig Parish Church, among other places. Further afield, we also cover the area around Uig Heritage Centre (within half a mile north-east). The countryside around Timsgarry includes Suainaval and Loch Suainaval.

Map of Timsgarry © OpenStreetMap contributors

How we price non-slip bath coating

There’s no charge for travel to Timsgarry. The price depends on:

  • How easy the damage is to reach
  • How hard the colour is to match
  • Previous DIY repairs that have to come out
  • The material

A few things move the price: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Photos let us give you a fixed figure.

Quotes from your pictures

Before you send photos, these tips help us give you a firm price:

  • A close-up of the damage, in focus
  • Natural light rather than flash
  • Something in shot to show the size
  • What it’s made of, if you know

Getting a price is easy: snap the damage close up and then the whole item, send them to us with your postcode, and we’ll reply with a fixed price. There is no charge for the quote and you are under no obligation.

How it works

It’s a tidy, low-fuss visit. We agree the arrival time in advance, cover and mask the work area, then carry out the work, which usually takes a few hours. If anything looks different from your photos, we’ll talk to you before going ahead.

  1. First the standing area is cleaned and degreased.
  2. The area to be treated is masked out.
  3. We put on the clear non-slip coating.
  4. The masking comes off to leave a neat edge.
  5. The coating is left to cure before use, generally overnight.

How to prepare

  • Make sure the room can be ventilated
  • Keep children and pets away from the room on the day
  • Tell us about any previous repairs or coatings

Getting a price

A quote takes minutes to ask for: take one close-up and one wider shot of the bath or shower tray, add your postcode and send them over. You will get a fixed price, not an estimate.

Send photos for a quote

Read more

DIY repairs versus a professional job

A DIY attempt is not a disaster. We remove the old filler and start again, so it will not stop us repairing it. Just mention it when you send pictures, as it can add time.

It’s natural to want to try a repair yourself. The trouble is that kit repairs frequently look fine at first and then fail, and the old filler has to come out before a proper repair.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.