Calderdale · England
Non-Slip Bath Coating in Tinker Hey
Non-slip bath coating for Tinker Hey, without a refit. Send us photos for a fixed quote, then we come to you.
- A bath or tray that is slippery when wet
- Safety for older or less mobile people
- Bath mats that harbour mould or get forgotten
How we handle non-slip bath coating in Tinker Hey
It suits older people, families and holiday lets. It’s a clear, textured coating, so it shows only as a slightly matt area where you stand. We work on shower trays, acrylic baths and enamelled baths, and people most often call us about bath mats that harbour mould or get forgotten and a bath or tray that is slippery when wet.
Peace of mind is built in: each job carries a one-year guarantee, and we’ll explain exactly what it covers when we quote. Clean with a soft brush and a mild cleaner. Don’t use abrasive pads on the textured area.
- Where
- Tinker Hey (HX3, HX6, HX4)
- Area hub
- Calderdale
- Warranty
- One year on every repair
- Price
- Free, fixed quote from pictures
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
Signs you need non-slip bath coating in Tinker Hey
Baths and trays are made smooth so they’re easy to clean, yet with soap and water on them they become slippery. Textured areas on older baths wear smooth too.
It’s worth getting a quote if you see:
- Resurfaced baths that are now too smooth
- Worn-out textured areas
- Bath mats that harbour mould or get forgotten
- Safety for older or less mobile people
Questions to ask before booking
- What the guarantee covers, and for how long
- Whether the price covers travel
- What aftercare is recommended
- What happens if the damage is worse than the photos show
Honest limits
We won’t take on work that will not last, so these are the limits:
- Surfaces that are already damaged or peeling (these need repairing first)
- Textured areas still wet or recently cleaned with oily products
- Outdoor surfaces
Send us photos and we will tell you honestly.
What we work on
- Wet room floors (ask us)
- Enamelled baths
- Resurfaced baths
- Shower trays
- Acrylic baths
Tinker Hey and nearby
Tinker Hey is about 1 mile south of King Cross, in Calderdale. Jobs in Tinker Hey are booked in like any other job: a fixed quote from your photos, and a technician at your door on the day. Tinker Hey is one of 129 places in Calderdale where we work. We work right across the region, from Tinker Hey to Leeds (about 16 miles away).
We work across HX3, HX6 and HX4 and the streets around it. Neighbouring places we cover include Copley (1 mile east), Upper Greetland (1 mile south), Greetland (1 mile south-east), Lindwell (1 mile south-east) and Gate Head (1 mile south). Larger places within reach include Brighouse (4 miles east), Todmorden (9 miles west), Hebden Bridge (6 miles north-west), Akroydon (3 miles north), Wheatley (3 miles north) and Rastrick (4 miles east).
Near you in Tinker Hey
We visit homes around Park Lane Learning Trust, People's Park and Copley Primary School. Other local landmarks include St Stephen's Church (under half a mile east), Volunteer Arms (0.6 miles east), The Crossley Heath School (1 mile north) and Harrison House (1.8 miles north-east). Tinker Hey’s nearest station is Sowerby Bridge station, about 1.2 miles north-west of the centre. Nearby you’ll also find Calderdale Royal Hospital (1.2 miles north-east) and Crossley House (1.7 miles north). Open spaces near Tinker Hey include Moorside Edge.
Should I try a DIY kit first?
If you are set on a kit, follow its instructions closely and work on a clean, dry surface, and do not use it until it has fully cured. If it fails, we can still put it right.
A kit can be fine for a tiny mark out of sight. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, it’s worth having it done properly.
Repair or replace in Tinker Hey?
The alternatives are a new textured bath or tray, or a bath mat that needs lifting and cleaning. A non-slip coating treats your existing bath or tray. Instead of hourly rates, we fix the price before we start. Damage, material and access decide it, and combining items on one visit brings it down.
What you get with us
- Straight answers about what a repair can do
- Fixed prices from your pictures
- One-year guarantee on every repair
- Nothing taken out or refitted
Read our full price list.
Prices and what affects them
We price every job individually, from your photos. The main factors are:
- How many areas need work
- Unusual colours or finishes
- Where the damage is and how we get to it
- Any earlier repairs that need removing first
Most people are surprised how affordable a repair is, particularly next to the cost of replacement. Send photos and we’ll give you the exact figure.
Getting a price from pictures
We price nearly every job from pictures. This is what we need:
- Where you are, by postcode
- Whether it’s been repaired or coated before
- Good light, ideally daylight, without flash glare
- A picture taken from further back
Send us a photo of the damage and a wider shot of the whole item, and tell us you’re in Tinker Hey, and we’ll reply with a fixed price.
Also near Tinker Hey
Other services in Tinker Hey
How the visit works
There is not much you need to do on the day. Show us the job, point us to the room, and we’ll take it from there. Most visits take a morning or an afternoon, including clearing up.
- We start by degreasing the area where you stand.
- We mask out the area to be treated.
- We put on the clear non-slip coating.
- The masking comes off to leave a neat edge.
- The coating is left to cure before use, generally overnight.
How to prepare
- Have somewhere for us to park nearby if possible
- Ensure the area is dry
- Have a window or extractor fan available
Getting a price
Pricing is simple: take a close-up of the damage and a photo from further back, send them over with your postcode, and you will get a fixed quote back. There is no charge for the quote and you’re under no obligation.
Read more
Landlords, agents and businesses in Tinker Hey
Hotels, guest houses and holiday lets can’t afford rooms out of action for long, so we keep visits short and tidy. We’ll fit around changeovers where we can.
We also carry out snagging repairs for builders and developers, putting right damage done during fitting. We hold CHAS, Constructionline and SafeContractor accreditations.
Questions from Tinker Hey
What does non-slip bath coating cost?
Every job gets a fixed price based on photos of the damage. Send a close-up and a picture of the entire item with your HX3 postcode.
Do you cover Tinker Hey?
Yes. We work across the UK and come to Tinker Hey and the rest of Calderdale. Send us photos for a fixed quote, or call 0345 017 0787.
Do I need to be at home?
Yes. We need access to the room while we work, at a time that suits you.
It’s been repaired before. Can you still fix it?
Generally, yes. Tell us what was done before and we will plan for it.
Is a repair better than a new one?
Generally, yes. A repair skips the removal, fitting and redecorating. If it is not worth repairing, we will tell you.
Is a non-slip bath easy to clean?
Yes. Use a soft brush and a mild cleaner.
Can tenants book a repair?
Yes. Ask your landlord first, and we can send them the quote if that helps.
Are you a vetted contractor?
Yes. Our accreditations include CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.
About our accreditations · Every repair comes with a one-year guarantee.
