Monmouthshire · Wales

Non-slip bath & shower coating in Tintern, Monmouthshire

We travel to Tintern for clear non-slip coatings for baths and shower trays. Everything is done in place, and the work is guaranteed.

  • Bath mats that harbour mould or get forgotten
  • Resurfaced baths that are now too smooth
  • A bath or tray that is slippery when wet
Surface Doctor technician refinishing the outside of a roll-top bath

Book non-slip bath coating in Tintern

Signs you need non-slip bath coating in Tintern

Smooth surfaces are easy to clean, but wet, soapy surfaces are slippery. Textured areas on older baths wear smooth too.

Typical reasons for a call-out include:

  • A bath or tray that is slippery when wet
  • Worn-out textured areas
  • Bath mats that harbour mould or get forgotten
  • Resurfaced baths that are now too smooth

Comparing quotes

  • A fixed price, and whether VAT is included
  • What preparation is included
  • How long it needs to cure
  • How your room will be protected

How to compare quotes

How we handle non-slip bath coating in Tintern

It’s popular with older people, families and holiday lets. The coating is clear and textured, so it shows only as a slightly matt area where you stand. We’re often asked to fix a bath or tray that is slippery when wet and bath mats that harbour mould or get forgotten, on enamelled baths, wet room floors (ask us) and resurfaced baths.

You’re covered for a year from the day of the repair. If anything isn’t right, ring us and we’ll come back. A soft brush and mild cleaner keep it clean. Avoid scourers on the coating.

Area
Tintern (NP16)
Region
Monmouthshire
Guarantee
A year, on every repair
Quotes
Free and fixed, from your photos
Call
0345 017 0787
Updated
23 October 2026
Discoloured square shower tray restored with a new white finish

Work for landlords and builders

Rental properties take more wear, and replacing things at every changeover adds up. Repairing between tenants keeps the property presentable for less.

Letting agents frequently send us pictures straight from the inventory. That means we can quote before you even visit the property, and we can arrange access with the tenant directly if that helps.

Tintern: your questions answered

Can you price it without visiting?

Usually, yes. Clear pictures let us give you a fixed price without visiting.

Is it OK to have pets in the house?

Just keep them out of the work area. We will tell you when the room can be used again.

What areas do you cover?

We cover the entire UK, including Tintern and the rest of Monmouthshire. Just include your postcode and we will confirm dates.

Is repairing better than replacing?

Generally, yes. A repair skips the removal, fitting and redecorating. If it is not worth repairing, we will tell you.

Do you come to Tintern?

We do. Technicians travel to Tintern from across the region, and the price is the same as everywhere else.

Can tenants book a repair?

Of course. Ask your landlord first, and we can send them the quote if that helps.

Do you work for landlords and businesses?

Yes, often. We can quote for several properties together and work between tenancies.

Will the price change on the day?

If we find something the pictures didn’t show, we explain it first. You decide whether to go ahead.

How it works

Arrival times are agreed in advance, so you know when to expect us. On site, it takes a morning or an afternoon in most cases. We leave the room clean and ready to use once it has cured.

  1. First the standing area is cleaned and degreased.
  2. Next we mask off the area.
  3. The clear textured coating is applied.
  4. We lift the masking for a clean edge.
  5. The coating is left to cure before use, normally overnight.

Preparing for the visit

  • Have somewhere for us to park nearby if possible
  • Clear the area around the damage
  • Let us know about parking or access

Ask for a price

There is no need for us to visit first. Photos are enough for us to price nearly every job: send a close-up, a wider shot and your postcode, and we’ll come back to you with a fixed figure.

Get a free quote

Read more

Prices and what affects them

Each job gets its own fixed price. These are the things that affect it:

  • How easy the damage is to reach
  • Doing more than one item at once
  • Any earlier repairs that need removing first
  • What the surface is made of

Rather than charging by the hour, we fix the price before we start. It depends on the damage, the material and access.

Getting a price from photos

We price nearly every job from pictures. This is what we need:

  • Good light, ideally daylight, without flash glare
  • A coin beside the damage so we can judge size
  • A wider photo showing the entire bath or shower tray
  • The material, if you know it

Most customers in Tintern get their price from pictures. Tell us what happened and where you are, and we’ll send back a fixed quote and some dates.

Should I try a DIY kit first?

A kit can be fine for a tiny mark out of sight. For damage in plain view, cracks, holes or rust, or coloured finishes, it’s worth having it done properly.

We understand the appeal of fixing it yourself. The trouble is that kit repairs often look fine at first and then fail, and then the old filler has to be removed first.

When we would advise against a repair

We will not take on work that won’t last, so here’s what a repair cannot put right:

  • Surfaces that are already damaged or peeling (these need repairing first)
  • Textured areas still wet or recently cleaned with oily products
  • Outdoor surfaces

Not sure? Send photos and we’ll give you a straight answer before you book.

What we work on

  • Acrylic baths
  • Wet room floors (ask us)
  • Enamelled baths
  • Shower trays
  • Resurfaced baths

Tintern and nearby

Tintern is about 4 miles north of Chepstow, in Monmouthshire. We work in every kind of home, old or new, large or small, plus businesses and rented homes. Tintern is one of 115 towns and villages in Monmouthshire where we work. Our jobs stretch from Tintern to Birmingham (about 63 miles away).

Jobs in NP16 are booked in the same way as anywhere else. We regularly work on streets such as Main Road and Glynwood Lane. Other places close to Tintern include Penterry (1 mile south-west), Tidenham Chase (2 miles south-east), St Arvans (2 miles south), Boughspring (2 miles south-east) and Netherhope (3 miles south-east). Within a short drive, we also cover Chepstow (4 miles south), Monmouth (8 miles north), Cil-y-coed (8 miles south-west), Bulwark (5 miles south), Overmonnow (8 miles north) and Gwndy (10 miles south-west).

Local landmarks in Tintern

Around Tintern, we work in homes near Royal George Hotel, Lippets Grove and Church of St Michael and the streets around them. Tintern’s nearest station is Chepstow station, about 4 miles south. Other landmarks nearby include Chepstow Community Hospital (3.9 miles south) and Chepstow Park Wood Earthwork (2.8 miles south-west). For a walk, there is Beddick Hill and The Park & Poor's Allotment Nature Reserve.

Map of Tintern © OpenStreetMap contributors

Repair or replace in Tintern?

Instead, you could go for replacing the bath or tray with a textured one, or a bath mat, which traps water and needs cleaning. A non-slip coating treats your existing bath or tray. A repair is priced on what needs doing, not where you live. You will see the full price before you book, with nothing added on the day.

Why Tintern customers choose us

  • Repair technicians who travel to you, UK-wide
  • Dust sheets down, tidy finish
  • A year’s guarantee on all work
  • Same prices wherever you are

Take a look at our full price list.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.