Warwickshire · England

Non-slip bath & shower coating in Toft, Warwickshire

Non-slip bath coating for Toft, without a refit. Send us pictures for a fixed quote, then book a visit.

  • Worn-out textured areas
  • Bath mats that harbour mould or get forgotten
  • A bath or tray that is slippery when wet
Surface Doctor technician refinishing the outside of a roll-top bath

Need non-slip bath coating in Toft?

Our work in Toft

Toft is about 3 miles south-west of Rugby, in Warwickshire. Anywhere in CV22, we carry out the work at your property. Our technicians cover 324 places in Warwickshire, from the larger towns to small villages. You can also see our page for Birmingham, about 27 miles away.

All of CV22 and CV23 is covered, from the main roads to the quietest streets. Close by, we cover Dunchurch (1 mile north-east), Woolscott (2 miles south-east), Bilton (2 miles north), New Bilton (3 miles north) and Willoughby (3 miles south-east). Within a short drive, we also cover Nuneaton (15 miles north-west), Warwick (12 miles west), Royal Leamington Spa (10 miles west), Bedworth (13 miles north-west), Leamington Spa (10 miles west) and Kenilworth (12 miles west).

Near you in Toft

Around Toft, we work in homes near Dunchurch Boughton CofE (Voluntary Aided) Junior School, Dunchurch-Winton Hall and Rugby High School. Nearby too are Church of St Peter (0.6 miles north-east) and Green Man pub (0.5 miles north-east). The nearest railway station is Rugby station, about 3.9 miles north-east of the centre. Other landmarks nearby include Clock Towers Shopping Centre (3.2 miles north-east) and Hospital of St. Cross (2.8 miles north-east). For a walk, there is Newbold Quarry Park and Hensborough Hill.

Map of Toft © OpenStreetMap contributors

Non-slip bath coating in Toft without replacing anything

It suits older people, families and holiday lets. The coating is clear and textured, so the bath looks much the same. Our technicians work on shower trays, wet room floors (ask us) and acrylic baths, and the jobs we see most are worn-out textured areas and a bath or tray that is slippery when wet.

A one-year guarantee comes as standard, so you are covered after the visit. A soft brush and mild cleaner keep it clean. Avoid scourers on the coating.

Location
Toft (CV22, CV23)
Area hub
Warwickshire
Cover
One year on every repair
Quote
Free and fixed, from your pictures
Phone
0345 017 0787
Page updated
23 October 2026
Discoloured square shower tray restored with a new white finish

What a repair cannot fix

A repair isn’t right for every job, including:

  • Surfaces that are already damaged or peeling (these need repairing first)
  • Textured areas still wet or recently cleaned with oily products
  • Outdoor surfaces

Send us pictures and we’ll tell you honestly.

What we work on

  • Enamelled baths
  • Resurfaced baths
  • Wet room floors (ask us)
  • Acrylic baths
  • Shower trays

What we are called out for in Toft

Smooth surfaces are easy to clean, yet wet, soapy surfaces are slippery. Textured areas on older baths wear smooth too.

People generally call us after spotting something like this:

  • Resurfaced baths that are now too smooth
  • Bath mats that harbour mould or get forgotten
  • Safety for older or less mobile people
  • A bath or tray that is slippery when wet

What your quote should include

  • What aftercare is recommended
  • Who turns up on the day
  • Is the price fixed, and does it include VAT?
  • What the guarantee covers, and for how long

Our hiring checklist

DIY repairs versus a professional job

If you’re set on a kit, follow its instructions closely and work on a clean, dry surface, and give it the full curing time. If it does not work out, we can still repair it properly.

It’s tempting to reach for a kit, but the repairs we redo most often are DIY ones that have discoloured or lifted. Getting it right first time is typically cheaper.

How the visit works

On the day, we arrive at the time we’ve agreed, cover the area with dust sheets and masking, and set to work. Expect it to take a morning or an afternoon. We clean up when we are done and tell you when it’s ready to use.

  1. We clean and degrease the standing area.
  2. We mask out the area to be treated.
  3. We put on the clear non-slip coating.
  4. We remove the masking for a neat edge.
  5. Once it has cured, normally overnight, it’s ready.

Getting ready for the visit

  • Make sure the room can be ventilated
  • Let the surface dry out before the visit
  • Point us to the nearest place to park

Ask for a price

We price from pictures so you do not have to wait in for a survey. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through.

Get a fixed price

Read more

Repair or replace: which is better?

Instead, you could go for replacing the bath or tray with a textured one, or a bath mat that needs lifting and cleaning. A non-slip coating treats your existing bath or tray. The price reflects the work involved, not your postcode. The full price is agreed before booking, with nothing added on the day.

Why Toft customers choose us

  • Straight answers about what a repair can do
  • Rooms protected and left tidy
  • Repair technicians who travel to you, UK-wide
  • Everything repaired in place

Read our full price list.

Common questions in Toft

Is it worth repairing rather than replacing?

In most cases, yes. A repair skips the removal, fitting and redecorating. We’ll be honest if it’s not worth it.

How do I book?

Some pictures, your postcode and how to reach you. On the day, access to the room.

What areas do you cover?

The entire UK, including all of Warwickshire. Send your postcode with your photos and we will offer you dates.

Can I get a quote without a visit?

Normally, yes. Clear pictures let us give you a fixed price without visiting.

Will you leave a mess?

Dust sheets and masking go down before we start, and we clean up when we’ve finished.

Are you a vetted contractor?

Yes. Our accreditations include CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.

It’s been repaired before. Can you still fix it?

Most of the time. Let us know what was used before and we will plan for it.

Is a non-slip bath easy to clean?

Yes. A soft brush and mild cleaner is all it needs.

How we price non-slip bath coating

A fixed quote means you know the cost before booking. We take into account:

  • What the surface is made of
  • How easy the damage is to reach
  • The colour and finish to match
  • Doing more than one item at once

What it costs depends on the type and amount of damage, the material and how many jobs we combine into one visit. We give a fixed price from your photos, so there are no surprises on the day.

How to get a fixed price

Before you send pictures, these tips help us give you a firm price:

  • The postcode, so we can plan the visit
  • A clear, close picture of the problem area
  • One picture of the whole bath or shower tray
  • A coin or ruler next to the damage for scale

Getting a price is easy: take a close-up of the damage and a picture from further back, send them to us with your postcode, and we will reply with a fixed price. Quotes are free and you’re under no obligation.

Work for landlords and builders

We also carry out snagging repairs for builders and developers, putting right damage done during fitting. We’re CHAS, Constructionline and SafeContractor accredited.

Housing associations and facilities teams use us for planned and reactive repairs in Warwickshire and across the UK. Repairing in place avoids the disruption of a replacement, which is easier on the people living there.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.