Middlesbrough · England
Non-Slip Bath Coating for Tollesby homes
Non-slip bath coating in Tollesby without the cost of replacing. Send us pictures for a fixed quote, then book a visit.
- Safety for older or less mobile people
- Resurfaced baths that are now too smooth
- A bath or tray that is slippery when wet
Non-slip bath coating at your home in Tollesby
It suits older people, families and holiday lets. It’s a clear, textured coating, so the bath looks much the same. Common call-outs are for bath mats that harbour mould or get forgotten and resurfaced baths that are now too smooth, across wet room floors (ask us), resurfaced baths and shower trays.
Every repair comes with our one-year guarantee, wherever you are in Middlesbrough. Clean with a soft brush and a mild cleaner. Avoid scourers on the coating.
- Where
- Tollesby (TS7, TS4, TS8)
- Area hub
- Middlesbrough
- Warranty
- A year, on every repair
- Quotes
- Free and fixed, from your photos
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
Repairing versus replacing in Tollesby
The alternatives are a new textured bath or tray, or a bath mat, which traps water and needs cleaning. A coating treats your existing bath or tray. A repair is priced on what needs doing, not where you live. You will see the full price before booking, with no extras added later.
Why us?
- Everything repaired in place
- A fixed quote before booking
- Accredited with CHAS, Constructionline and SafeContractor
- Every repair guaranteed for a year
See our prices page.
Honest limits
A repair is not always the answer, and we will tell you before we start. We can’t fix:
- Surfaces that are already damaged or peeling (these need repairing first)
- Textured areas still wet or recently cleaned with oily products
- Outdoor surfaces
If in doubt, send photos and we will say what we think.
Materials we work on in Tollesby
- Resurfaced baths
- Enamelled baths
- Shower trays
- Acrylic baths
- Wet room floors (ask us)
Prices and what affects them
Quotes are free and the price is fixed. What we look at:
- Whether we combine several jobs
- How much damage there is
- The colour and finish to match
- What kind of damage it is
Most people are surprised how affordable a repair is, particularly next to the cost of replacement. Send photos and we will give you the exact figure.
Getting a price from pictures
When you take your photos, a few simple things make all the difference:
- What it’s made of, if you know
- A wider photo showing the whole bath or shower tray
- Whether it’s been repaired or coated before
- Where you are, by postcode
Getting a quote takes a couple of minutes: take one close-up and one wider shot of the bath or shower tray, include your postcode and send them to us. You’ll get a fixed price, not an estimate.
Landlords, agents and businesses in Tollesby
Letting agents frequently send us pictures straight from the inventory. You can have a price before you arrange access, and we can arrange access with the tenant directly if that helps.
Builders use us to fix snagging damage before handover, saving last-minute replacements. Several plots can be done in one visit.
Your questions about non-slip bath coating in Tollesby
Are you accredited?
Yes. Our accreditations include CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.
Can you repair something that is been repaired before?
Generally, yes. Tell us what was done before.
Are there extra charges for Tollesby?
We don’t add a call-out fee. The fixed quote covers the visit and the work.
Can landlords book you?
We do, regularly. We quote for multiple addresses and fit around tenancy changeovers.
Do you cover Tollesby?
We do. We send a technician to Tollesby for every job, and the price is the same as everywhere else.
How much does non-slip bath coating cost in Tollesby?
Every job gets a fixed quote from your pictures. Send a close-up and a picture of the entire item and your postcode.
What happens after I send pictures?
We come back with a fixed quote, plus dates. You are under no obligation.
Is it OK to have pets in the house?
We ask you to keep children and pets out of the room while we work and until it has cured. Everywhere else in the home is fine.
What happens on the day
We begin by going over the job with you, so you know exactly what we are doing. Next, we cover and mask everything nearby and the work begins. You can expect it to take a morning or an afternoon.
- We clean and degrease the standing area.
- We mask out the area to be treated.
- The clear textured coating is applied.
- We lift the masking for a clean edge.
- The coating is left to cure before use, generally overnight.
How to prepare
- Tell us about any previous repairs or coatings
- Clear the area around the damage
- Open a window if you can
Ask for a price
You do not need a survey visit. Photos are enough for us to price nearly every job: send a close-up, a wider shot and your postcode, and we’ll come back to you with a fixed figure.
Related advice
Places near Tollesby
Also in Tollesby
Should I try a DIY kit first?
Kits are cheap and easy to find, but the repairs we redo most often are DIY ones that have discoloured or lifted. Doing it properly first is usually the cheaper route.
If you’ve already tried a DIY fix, that is fine. We remove the old filler and start again, so it will not stop us repairing it. Just mention it when you send pictures, as it can add time.
Where we work around Tollesby
Tollesby is about 1 mile south of Middlesbrough, in Middlesbrough. Clients in Tollesby get the same service as everywhere else we cover: a fixed price from your pictures, then a visit to do the work. Tollesby is one of 33 places in Middlesbrough we cover. We work right across the region, from Tollesby to Newcastle upon Tyne (36 miles away).
Every address in TS7, TS4 and TS8 is covered, from the main roads to the quietest streets. From Dante Road, Sydney Road and Argyll Road or anywhere nearby, a technician can come to you. Tollesby sits on or near the A172 and A174, so getting to you is simple. We also travel to Marton (1 mile north), Saltersgill (1 mile north), Coulby Newham (1 mile south), Middlesbrough (1 mile north) and Hemlington (1 mile south-west). Within a short drive, we also cover Whale Hill (4 miles north-east), Normanby (3 miles north-east), Newtown (5 miles north-west), Oxbridge (5 miles west), Tilery (5 miles north-west) and Bowesfield (5 miles west).
Near you in Tollesby
Around Tollesby, we work in homes near Stewart Park, Marton Manor Primary School and The King's Academy, among other places. Other local landmarks include Viking Hotel (0.7 miles north), Church of St. Cuthbert (under half a mile north-east) and Newlands School FCJ (1 mile north-west). The nearest railway station is Marton station, about 0.9 miles north-east of the centre. Well-known places in the area include Castle Hill (4.6 miles south) and Cleveland Centre (2.9 miles north). For a walk, there is Eston Nab and RSPB Salthome.
- Parks and local facilities nearby include Cleveland (1.1 miles south-east)
Do you need non-slip bath coating in Tollesby?
Baths and trays are made smooth so they’re easy to clean, yet with soap and water on them they become slippery. The textured patch on an older bath also wears down over time.
Most people get in touch after spotting one of these:
- Resurfaced baths that are now too smooth
- Bath mats that harbour mould or get forgotten
- Safety for older or less mobile people
- A bath or tray that is slippery when wet
Comparing quotes
- Is the price fixed, and does it include VAT?
- Whether they match the colour on site
- How long it needs to cure
- What happens if the damage is worse than the pictures show
About our accreditations · Every repair comes with a one-year guarantee.
