Perth and Kinross · Scotland

Non-slip bath & shower coating in Trinafour, Perth and Kinross

Non-slip bath coating for Trinafour, without a refit. Send us pictures for a fixed quote, then book a visit.

  • Worn-out textured areas
  • A bath or tray that is slippery when wet
  • Safety for older or less mobile people
Surface Doctor technician refinishing the outside of a roll-top bath

Non-slip bath coating in Trinafour

Non-slip bath coating in Trinafour without replacing anything

The coating is clear and textured, so the bath looks much the same. It’s popular with homes with older or less mobile people, holiday lets and families. We regularly repair acrylic baths, shower trays and wet room floors (ask us), and common reasons people get in touch are bath mats that harbour mould or get forgotten and a bath or tray that is slippery when wet.

You get a one-year guarantee, the same in Trinafour as everywhere else we work. Clean with a soft brush and a mild cleaner. Don’t use abrasive pads on the textured area.

Discoloured square shower tray restored with a new white finish
Location
Trinafour (PH18)
Region
Perth and Kinross
Cover
12 months on all our work
Quote
Free and fixed, from your pictures
Telephone
0345 017 0787
Updated
23 October 2026

Trinafour questions

Which areas do you work in?

The whole UK, including all of Perth and Kinross. Send your postcode with your photos and we’ll confirm dates.

Is there any odour?

There can be some smell while we work. It clears as the materials cure.

Are you accredited?

Yes, including CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.

Can I add another job to the visit?

Of course, and it usually saves money. Just add the extra items to your pictures and we will quote them together.

How soon can you come?

That depends on our diary for your area. Send pictures with your postcode and we will reply with the earliest dates.

How do I get a price for non-slip bath coating in Trinafour?

We give a fixed price from your photos. Send a close-up of the damage and a wider photo with your PH18 postcode.

Will I see the coating?

Only slightly: it shows as a matt area where you stand.

I’m a tenant. Can you help?

Of course. Ask your landlord first, and we can send them the quote if that helps.

For landlords and businesses

Hospitality businesses cannot afford rooms out of action for long, so we keep visits short and tidy. We can work around your bookings.

We also carry out snagging repairs for builders and developers, putting right damage done during fitting so nothing needs replacing. We hold CHAS, Constructionline and SafeContractor accreditations.

When a repair isn’t the answer

A repair is not always the answer, and we would rather say so up front. Repairs won’t solve:

  • Surfaces that are already damaged or peeling (these need repairing first)
  • Textured areas still wet or recently cleaned with oily products
  • Outdoor surfaces

Not sure? Send photos and we’ll give you a straight answer.

Materials we repair

  • Enamelled baths
  • Wet room floors (ask us)
  • Acrylic baths
  • Shower trays
  • Resurfaced baths

Prices and what affects them

A fixed quote means you know the cost before you book. We take into account:

  • Whether it’s a chip, crack, burn or wear
  • Where the damage is and how we get to it
  • Previous DIY repairs that have to come out
  • The size and number of damaged areas

It helps to know what pushes a price up or down: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Send pictures and you will get a fixed figure.

Quotes from your pictures

We price nearly every job from pictures. This is what to send:

  • A wider photo showing the entire bath or shower tray
  • A coin or ruler next to the damage for scale
  • Your postcode, so we can check dates
  • Any earlier repairs or coatings

The quickest way to a price is to send two or three pictures through our quote form or call us. We’ll tell you honestly whether it can be repaired.

Can I fix it myself?

A kit can be fine for a tiny mark out of sight. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, it’s worth having it done properly.

Kits are cheap and easy to find, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is usually the cheaper route.

How the visit works

Once we’re through the door, we keep the work contained to the one room. Surfaces nearby are masked off, the job takes a few hours, depending on what we find, and we finish by cleaning up and talking you through the result.

  1. We start by degreasing the area where you stand.
  2. The area to be treated is masked out.
  3. We put on the clear non-slip coating.
  4. We remove the masking for a neat edge.
  5. The coating is left to cure before use, typically overnight.

Getting ready for the visit

  • Plan for the room to be out of bounds to pets and children
  • Make sure the room can be ventilated
  • Point us to the nearest place to park

Getting a price

There’s no need for us to visit first. Nearly every job can be priced from pictures: we need a close-up, a wider picture and your postcode, and we’ll come back to you with a fixed figure.

Get a free quote

Advice

Why repair rather than replace?

Instead, you could go for replacing the bath or tray with a textured one, or a bath mat, which traps water and needs cleaning. A non-slip coating adds grip to the bath you have. There are no surprise extras on the day. What we quote from your photos is what you pay, unless the damage turns out to be different, in which case we talk to you first.

Why Trinafour customers choose us

  • Nothing taken out or refitted
  • Every repair guaranteed for a year
  • Most jobs done in one visit
  • Rooms protected and left tidy

Read our pricing.

Trinafour and the surrounding area

Trinafour is about 31 miles west of Blairgowrie and Rattray, in Perth and Kinross. We agree a date that works for you, and we’ll give you an arrival time in advance, so you are not left waiting in all day. We work in 107 places across Perth and Kinross. You can also see our page for Glasgow, about 63 miles away.

Postcode districts we cover here: PH18. Neighbouring places we cover include Old Struan (5 miles east), Kinloch Rannoch (5 miles south-west), Old Blair (9 miles east), Bridge of Tilt (9 miles east) and Blair Atholl (9 miles east). For island and remote addresses, ring us first and we will plan the trip.

Landmarks near Trinafour

The countryside around Trinafour includes Dubh Lochan.

Map of Trinafour © OpenStreetMap contributors

When to call us in Trinafour

Smooth surfaces are easy to clean, but with soap and water on them they become slippery. The textured patch on an older bath also wears down over time.

Most people contact us after spotting one of these:

  • Bath mats that harbour mould or get forgotten
  • Worn-out textured areas
  • Resurfaced baths that are now too smooth
  • Safety for older or less mobile people

Questions to ask before you book

  • When it can be used again
  • What happens if the damage is worse than the pictures show
  • How to care for the finish
  • Whether the colour is mixed to match

Our hiring checklist

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.