Greater London · England
Non-slip bath & shower coating in Victoria, Greater London
Non-slip bath coating in and around Victoria: a fixed quote from pictures, a tidy visit and a one-year guarantee.
- A bath or tray that is slippery when wet
- Worn-out textured areas
- Resurfaced baths that are now too smooth
How we handle non-slip bath coating in Victoria
It suits homes with older or less mobile people, holiday lets and families. It’s a clear, textured coating, so the bath looks much the same. We regularly repair acrylic baths, wet room floors (ask us) and enamelled baths, and the jobs we see most are safety for older or less mobile people and resurfaced baths that are now too smooth.
Big or small, it’s backed by a one-year guarantee in Victoria and across Greater London. A soft brush and mild cleaner keep it clean. Avoid scourers on the coating.
- Area
- Victoria (SW1V, SW1P, SW1X)
- Area hub
- Greater London
- Cover
- A year, on every repair
- Quotes
- Free, fixed quote from pictures
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
Victoria and the surrounding area
Victoria is about 1 mile south of City of Westminster, in Greater London. Our work suits any type of property, old or new, large or small, plus businesses and rented homes. Victoria is one of 764 places in Greater London where we work.
Every address in SW1V, SW1P and SW1X is covered, from the main roads to the quietest streets. Whether you live on Eaton Lane, Gerald Road and Wilton Road or a nearby road, a technician can come to you. With the A202 and A302 close by, Victoria is simple for us to get to. Nearby, we also work in Belgravia (1 mile north-west), Pimlico (1 mile south-east), Westminster (1 mile north-east), Millbank (1 mile north-east) and Brompton (1 mile west). Further out, we also cover Shoreditch (4 miles north-east), Walthamstow (8 miles north-east), Hoxton (4 miles north-east), Whitechapel (4 miles north-east), Hampstead (4 miles north) and Ruislip (13 miles north-west).
What’s near Victoria
We visit homes around Westminster City School, Westminster Cathedral Choir School and St. Michael's Church and the streets around them. Nearby too are Green Park (0.6 miles north), St Peter's Eaton Square CofE Primary School (within half a mile north-west), London Library (0.9 miles north) and Wetherspoons pub (within half a mile east). There is a railway station in Victoria itself: London Victoria station. Further afield, we also cover the area around Baynard's Castle (2.2 miles north-east) and Health Exhibition Centre (within half a mile south-west). Open spaces near Victoria include Ludgate Hill and St. James's Park Lake.
- Parks and local facilities nearby include Westminster St Margaret and St John (0.6 miles north-east)
Repair or replace: which is better?
Instead, you could go for replacing the bath or tray with a textured one, or a bath mat, which traps water and needs cleaning. A coating adds grip to the bath you have. We don’t add extras on the day. What we quote from your pictures is what you pay, unless the damage turns out to be different, in which case we talk to you first.
Why Victoria clients choose us
- Everything repaired in place
- Work done at your home or business
- CHAS, Constructionline and SafeContractor accredited
- A fixed quote before booking
See our full price list.
What we’re called out for in Victoria
Baths and trays are made smooth so they’re easy to clean, yet with soap and water on them they become slippery. Textured areas on older baths wear smooth too.
Common reasons people in Victoria contact us are:
- Bath mats that harbour mould or get forgotten
- Safety for older or less mobile people
- A bath or tray that is slippery when wet
- Worn-out textured areas
Comparing quotes
- How changes to the job are handled
- How long the guarantee is and what it covers
- A fixed price, and whether VAT is included
- Whether the colour is mixed to match
What a repair cannot fix
Before you book, it’s worth knowing the limits too:
- Surfaces that are already damaged or peeling (these need repairing first)
- Textured areas still wet or recently cleaned with oily products
- Outdoor surfaces
Not sure? Send photos and we will give you a straight answer.
Materials we repair
- Enamelled baths
- Resurfaced baths
- Shower trays
- Wet room floors (ask us)
- Acrylic baths
What we do, step by step
The work is clean and fairly quiet, so you can carry on at home. We protect the area first, then the work takes a few hours. At the end we talk you through how soon it can be used and how to look after it.
- We clean and degrease the standing area.
- Next we mask off the area.
- We apply the clear textured coating.
- We remove the masking for a neat edge.
- We leave it to cure, generally overnight.
How to prepare
- Let the surface dry out before the visit
- Tell us if there are stairs or a lift
- Clear toiletries, mats and anything else from around the area
Get a quote
Call 0345 017 0787 or use the quote form. With a clear picture of the damage and one of the whole bath or shower tray, we can price the job.
Related advice
For landlords and businesses
We work for landlords, letting agents and housing providers in Victoria as well as homeowners. Repairing between tenancies keeps void periods short, and it typically costs far less than a refit.
Builders use us to fix snagging damage before handover. We can visit several plots in one trip.
Places near Victoria
What else we do in Victoria
Common questions in Victoria
Do you come to Victoria?
Yes. We work across the UK and come to Victoria. Send pictures and we will quote, or call 0345 017 0787.
Will I see the coating?
Very little: the treated area looks slightly matt.
Is my repair covered?
All our work carries a one-year guarantee. We will explain what it covers when we quote.
Is a non-slip bath easy to clean?
Yes. A soft brush and mild cleaner is all it needs.
Does someone need to be in?
We need someone to let us in. You do not need to watch us work.
What happens if you find more damage?
It’s rare, but if it happens we talk to you first. You decide whether to go ahead.
Can I add another job to the visit?
Yes, and it’s frequently cheaper. Send pictures of everything together and we will quote them together.
It’s been repaired before. Can you still fix it?
Generally, yes. We remove the old repair before doing a new one, so let us know about it.
DIY repairs versus a professional job
It’s natural to want to try a repair yourself. The trouble is that kit repairs frequently look fine at first and then fail, and the old filler has to come out before a proper repair.
You can buy a DIY kit for most repairs, and they can make a small mark look better. Where they fall down is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler frequently lifts.
How we price non-slip bath coating
We charge the same across the UK, including Victoria. The price reflects:
- How many areas need work
- The type of damage
- Any earlier repairs that need removing first
- What the surface is made of
It helps to know what pushes a price up or down: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Send photos and you will get a fixed figure.
Getting a price from pictures
You can take the pictures on your phone, there’s no need for anything special. Ensure they show:
- The material, if you know it
- A clear, close picture of the problem area
- Whether it’s been repaired or coated before
- Something in shot to show the size
Getting a price is easy: snap the damage close up and then the whole item, send them over with your postcode, and you will get a fixed quote back. There’s no charge for the quote and no obligation.
About our accreditations · Every repair comes with a one-year guarantee.
