Hertfordshire · England
Non-Slip Bath Coating for Walkern homes
Non-slip bath coating in and around Walkern: photo quotes, tidy work and a year’s guarantee.
- A bath or tray that is slippery when wet
- Safety for older or less mobile people
- Bath mats that harbour mould or get forgotten
Non-slip bath coating in Walkern, done in place
The coating is clear and textured, so the bath looks much the same. It suits older people, families and holiday lets. Typical jobs include safety for older or less mobile people and worn-out textured areas, in shower trays, acrylic baths and enamelled baths.
Big or small, you get the same one-year guarantee in Walkern and across Hertfordshire. A soft brush and mild cleaner keep it clean. Don’t use abrasive pads on the textured area.
- Location
- Walkern (SG2)
- County
- Hertfordshire
- Cover
- 12 months on all our work
- Quotes
- Fixed and free, based on photos
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
Common problems we fix in Walkern
Smooth surfaces are easy to clean, yet wet, soapy surfaces are slippery. Textured areas on older baths wear smooth too.
People usually call us when they notice something like this:
- A bath or tray that is slippery when wet
- Resurfaced baths that are now too smooth
- Safety for older or less mobile people
- Bath mats that harbour mould or get forgotten
Before booking anyone
- Aftercare advice
- Who turns up on the day
- How the room is protected while they work
- How long it needs to cure
Landlord and trade work in Walkern
Hospitality businesses need rooms back in use quickly, so most of our work is done in a single visit. We will fit around changeovers where we can.
Builders use us to fix snagging damage before handover, so there is no need to replace a damaged item at the last minute. We can visit several plots in one trip to keep costs down.
About Walkern
Walkern is about 2 miles east of Stevenage, in Hertfordshire. Our work suits any type of property, from flats and terraces to detached houses and new builds, as well as offices, shops and holiday lets. Walkern is one of 381 places in Hertfordshire where we work. We work right across the region, from Walkern to London (29 miles away).
We cover every part of the SG2 postcode area. Local streets include High Street, Walchra Court and Yew Tree Close. We also cover the places around Walkern: Aston End (2 miles south-west), Chells (2 miles west), St Nicholas (2 miles west), Stevenage (2 miles west) and Pin Green (3 miles west). Larger places within reach include St Albans (14 miles south-west), Bishop's Stortford (13 miles east), Welwyn Garden City (9 miles south), Harpenden (12 miles south-west), Hitchin (6 miles west) and Hoddesdon (12 miles south-east).
Around Walkern
Locally, our jobs take us to homes close to The Robin Hood Public House, Walkern Primary School and Parish Church of St Mary the Virgin and the streets around them. For rail, the closest station is Stevenage station, about 3.6 miles west of the centre. A little further out are Lister Hospital (3.6 miles west) and Stevenage Museum (3.3 miles west). Green spaces nearby include Pryor's Wood.
Towns and villages near Walkern
What else we do in Walkern
Repairing versus replacing in Walkern
Instead, you could go for replacing the bath or tray with a textured one, or relying on a mat, which traps water and needs cleaning. A non-slip coating treats your existing bath or tray. Rather than charging by the hour, we price the entire job up front. It depends on the damage, the material and access.
Why book with us
- Most jobs done in one visit
- A year’s guarantee on all work
- Rooms protected and left tidy
- Everything repaired in place
Take a look at our full price list.
Common questions in Walkern
What does non-slip bath coating cost?
The exact price depends on the damage, so we quote from pictures. You know the full cost before anything is booked.
Which areas do you work in?
Everywhere in the UK, Walkern included. Travel is included in the price.
Do you work for landlords and businesses?
Yes, frequently. We quote for multiple addresses and fit around tenancy changeovers.
Do you work in Walkern?
We do. We send a technician to Walkern for every job, and the price is the same as everywhere else.
Is it safe with children and pets around?
Keep pets and children away from the work area on the day, mainly so nothing gets touched before it has cured.
Do I need to be at home?
Yes. We need access to the room while we work, at a time that suits you.
Will you leave a mess?
No. The work area is masked and covered, and we leave the room clean.
How quickly can you book me in?
We will give you dates with your quote. Tell us if you need it done quickly.
How it works
Here’s how a visit normally runs: we arrive at the agreed slot, sheet and mask the area around the job, carry out the work and clear up. Allow a morning or an afternoon. Before leaving, we tell you when it can be used and what to avoid for the first few days.
- First the standing area is cleaned and degreased.
- The area to be treated is masked out.
- We put on the clear non-slip coating.
- We lift the masking for a clean edge.
- The coating is left to cure before use, usually overnight.
How to prepare
- Move bottles, mats and clutter away from the area
- Open a window if you can
- Mention if the room is upstairs or in a flat
Get a quote
There is no need for us to visit first. Nearly every job can be priced from pictures: send a close-up, a wider shot and your postcode, and we’ll come back to you with a fixed figure.
Advice
What non-slip bath coating costs
We do not charge extra for travel to Walkern. The price depends on:
- Whether it’s a chip, crack, burn or wear
- The material
- The size and number of damaged areas
- Previous DIY repairs that have to come out
Our prices are the same across the UK, so there is no premium for Walkern. What changes the price is the job itself: the material, the amount of damage and how many items.
Getting a price from pictures
You can take the pictures on your phone. Just ensure we can see:
- Daylight if possible, and no flash reflection
- One sharp close-up of the damage
- A picture taken from further back
- Any details about the material
We price from photos so you do not have to wait in for a survey. Use the quote form, or ring 0345 017 0787 to talk it through, and we will come back with a fixed figure.
When we would advise against a repair
A repair isn’t right for every job, including:
- Surfaces that are already damaged or peeling (these need repairing first)
- Textured areas still wet or recently cleaned with oily products
- Outdoor surfaces
Send us photos and we’ll tell you honestly before booking.
What we work on
- Enamelled baths
- Shower trays
- Acrylic baths
- Wet room floors (ask us)
- Resurfaced baths
DIY kit or professional repair?
If you’ve already tried a DIY fix, that is fine. We remove the old filler and start again, so it does not stop a professional repair. It does add a little time, so tell us about it when you send photos.
You can buy a DIY kit for most repairs, and they can make a small mark look better. Where they fall down is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler frequently lifts.
About our accreditations · Every repair comes with a one-year guarantee.
