Lancashire · England
Non-slip bath & shower coating in Walmer Bridge, Lancashire
We travel to Walmer Bridge for clear non-slip coatings for baths and shower trays. Everything is done in place, with a one-year guarantee.
- Worn-out textured areas
- Bath mats that harbour mould or get forgotten
- Resurfaced baths that are now too smooth
Non-slip bath coating at your home in Walmer Bridge
The coating is clear and textured, so the bath looks much the same. It suits older people, families and holiday lets. Common call-outs are for bath mats that harbour mould or get forgotten and resurfaced baths that are now too smooth, on acrylic baths, shower trays and resurfaced baths.
Your repair is guaranteed for a year, as with every job we do. Clean with a soft brush and a mild cleaner. Don’t use abrasive pads on the textured area.
- Area
- Walmer Bridge (PR4)
- County
- Lancashire
- Cover
- 12 months on all our work
- Quotes
- Free, fixed price from pictures
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
Signs you need non-slip bath coating in Walmer Bridge
Smooth surfaces are easy to clean, yet wet, soapy surfaces are slippery. Textured areas on older baths wear smooth too.
People normally call us after spotting something like this:
- Bath mats that harbour mould or get forgotten
- A bath or tray that is slippery when wet
- Worn-out textured areas
- Safety for older or less mobile people
What to look for in a quote
- Whether there are any call-out or travel charges
- Whether cleaning and preparation are in the price
- How long it needs to cure
- How the room is protected while they work
Places near Walmer Bridge
What else we do in Walmer Bridge
Walmer Bridge and the surrounding area
Walmer Bridge is about 3 miles south-west of Penwortham, in Lancashire. Our work suits any type of property, from flats and terraces to detached houses and new builds, plus businesses and rented homes. Walmer Bridge is one of 482 towns and villages in Lancashire where we work. You can also see our page for Liverpool, about 22 miles away.
Here we cover the PR4 postcode area. Whether you live on Old Mill Court, Liverpool Old Road and Hunters Fold or a nearby road, a technician can come to you. Close by, we cover Little Hoole Moss Houses (1 mile south-east), Longton (1 mile north), Bottom of Hutton (2 miles north), Hutton (2 miles north-east) and New Longton (2 miles east). We also work in nearby towns such as Preston (5 miles north-east), Chorley (8 miles south-east), Lytham St Anne's (9 miles west), Bamber Bridge (5 miles east), Leyland (4 miles east) and Fulwood (6 miles north-east).
Near you in Walmer Bridge
Around Walmer Bridge, we work in homes near Little Hoole Primary School, Hutton Grammar School and St Andrew's Church. The closest station to Walmer Bridge is Croston station, about 3.1 miles south of the centre. Well-known places in the area include Preston Royal Infirmary (5.4 miles north-east) and Penwortham Castle (4.1 miles north-east).
Should you replace it?
The alternatives are a new textured bath or tray, or a bath mat that needs lifting and cleaning. A non-slip coating treats your existing bath or tray. Set against the cost of replacement, repairing generally costs far less, because nothing has to be taken out, refitted or made good. The quote lists exactly what you are paying for.
Why book with us
- Accredited with CHAS, Constructionline and SafeContractor
- One price list for the whole UK
- We will tell you if it’s not worth repairing
- Normally one visit, start to finish
Read our prices page.
DIY repairs versus a professional job
Kits are cheap and easy to find, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is normally the cheaper route.
The difference between a kit and a professional repair is mostly in the preparation and colour. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, then guarantee it for a year.
Work for landlords and builders
We also carry out snagging repairs for builders and developers, putting right damage done during fitting. We’re CHAS, Constructionline and SafeContractor accredited.
We are used to working with agents and managing companies. Just send photos, the address and how to get access and we’ll handle the rest.
Prices and what affects them
We price every job individually, from your pictures. What matters most is:
- The material and finish
- How much damage there is
- Whether we combine several jobs
- What kind of damage it is
No two jobs are quite the same, so we price each one individually. The size and type of damage, the material and access all play a part, and combining jobs on one visit brings the cost down.
Send pictures for a quote
It only takes a minute to photograph the damage, and it saves a visit. Please include:
- Something in shot to show the size
- A wider photo showing the whole bath or shower tray
- The material, if you know it
- Daylight if possible, and no flash reflection
No survey visit is needed: we price from photos. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through, and you will get a fixed figure back.
What a repair cannot fix
It helps to know what we cannot do too:
- Surfaces that are already damaged or peeling (these need repairing first)
- Textured areas still wet or recently cleaned with oily products
- Outdoor surfaces
Send us photos and we will tell you honestly before booking.
Materials we work on in Walmer Bridge
- Acrylic baths
- Enamelled baths
- Wet room floors (ask us)
- Resurfaced baths
- Shower trays
FAQs for Walmer Bridge
Can you quote from pictures?
Yes, almost always. A close-up and a wider photo are enough to give a fixed price.
Do I need to be at home?
Yes. We need access to the room while we work, at a time that suits you.
Can you do more than one item on the same visit?
Of course, and it typically saves money. Send pictures of everything together and we will quote them together.
Do you cover the whole of Lancashire?
Across the UK, and that includes Walmer Bridge. Prices do not change with location.
Do you work in Walmer Bridge?
We do. Technicians travel to Walmer Bridge from across the region, with no extra charge for travel.
Are you a vetted contractor?
We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.
Will you leave a mess?
No. The work area is masked and covered, and we leave the room clean.
What if the damage is worse than the pictures show?
If we find something the pictures didn’t show, we explain it first. You decide whether to go ahead.
What we do, step by step
Visits start with a quick look at the job together, so you know exactly what we’re doing. Next, we cover and mask everything nearby and the work begins. It normally takes a morning or an afternoon.
- We start by degreasing the area where you stand.
- We mask out the area to be treated.
- We put on the clear non-slip coating.
- We remove the masking for a neat edge.
- We leave it to cure, typically overnight.
Before we arrive
- Open a window if you can
- Mention if the room is upstairs or in a flat
- Tell us about parking, stairs or access
Get a quote
There is no need for us to visit first. Photos are enough for us to price nearly every job: send a close-up, a wider shot and your postcode, and we will reply with a fixed quote.
Related advice
About our accreditations · Every repair comes with a one-year guarantee.
