Flintshire · England
Non-Slip Bath Coating for Walwen homes
Clear non-slip coatings for baths and shower trays for homes and businesses in Walwen and across Flintshire. Free, fixed quotes from your photos.
- Safety for older or less mobile people
- Worn-out textured areas
- A bath or tray that is slippery when wet
Repairing versus replacing in Walwen
The alternatives are replacing the bath or tray with a textured one, or relying on a mat that needs lifting and cleaning. A non-slip coating treats your existing bath or tray. Set against the cost of replacement, a repair is normally a fraction of the price, because nothing has to be taken out, refitted or made good. Your fixed quote shows exactly what’s included.
Why book with us
- Usually one visit, start to finish
- Same prices wherever you are
- CHAS, Constructionline and SafeContractor accredited
- Nothing taken out or refitted
Read our pricing.
Non-slip bath coating at your home in Walwen
It’s a clear, textured coating, so it shows only as a slightly matt area where you stand. It’s popular with homes with older or less mobile people, holiday lets and families. Our repair technicians work on wet room floors (ask us), shower trays and resurfaced baths, and the jobs we see most are a bath or tray that is slippery when wet and safety for older or less mobile people.
The work is covered for a year after we finish. Just call us if there is a problem and we will sort it. Clean with a soft brush and a mild cleaner. Avoid scourers on the coating.
- Where
- Walwen (CH6, CH8)
- Area hub
- Flintshire
- Guarantee
- 12 months on all our work
- Quotes
- Free and fixed, from your photos
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
Where we work around Walwen
Walwen is about 4 miles north-west of Flint, in Flintshire. We visit homes and businesses in Walwen and the surrounding area, so there is no workshop to go to. Walwen is one of 139 places in Flintshire we cover. You can also see our page for Liverpool, about 14 miles away.
We cover every part of the CH6 and CH8 postcode area and the streets around it. Jobs here include addresses on Upper River Bank, Llys Maesteg and Bagillt Road and the roads around them. Neighbouring places we cover include Whelston (1 mile south-east), Gadlys (1 mile south), Bagillt (2 miles south-east), Nant-bâch (2 miles south) and Halkyn (3 miles south). Further out, we also cover Connah's Quay (7 miles south-east), Buckley (9 miles south-east), Bwcle (9 miles south-east), Saltney (13 miles south-east), Mold (8 miles south) and Lache (14 miles south-east).
Local landmarks in Walwen
We visit homes around Ysgol Glan Aber C.P., Holy Trinity Church and The Victoria Inn and the streets around them. For rail, the closest station is Flint station, about 3.3 miles south-east of the centre. Other landmarks nearby include Holywell Community Hospital (1.3 miles south-west) and St Winefride's Well Museum (1.2 miles west). Green spaces nearby include Cefn.
DIY repairs versus a professional job
A kit can be fine for a tiny mark out of sight. For damage in plain view, cracks, holes or rust, or coloured finishes, it’s worth having it done properly.
If you’ve already tried a DIY fix, that is fine. We remove the old filler and start again, so it doesn’t stop a professional repair. It does add a little time, so tell us about it when you send photos.
How it works
Visits start with a quick look at the job together. Then the area is sheeted and masked and the work begins. You can expect it to take a morning or an afternoon, and we’ll tell you if anything changes.
- We clean and degrease the standing area.
- We mask out the area to be treated.
- We apply the clear textured coating.
- We lift the masking for a clean edge.
- The coating is left to cure before use, generally overnight.
How to prepare
- Tell us about parking, stairs or access
- Plan for the room to be out of bounds to pets and children
- Clear the area around the damage
Get a quote
For most jobs, pictures are all we need to give you a price. Add a line about what happened and your postcode, and we will reply with a fixed quote and the earliest dates we have.
Advice
What a repair can’t fix
A few problems are outside what a surface repair can do:
- Surfaces that are already damaged or peeling (these need repairing first)
- Textured areas still wet or recently cleaned with oily products
- Outdoor surfaces
If in doubt, send pictures and we will say what we think before booking.
Surfaces we repair
- Acrylic baths
- Enamelled baths
- Resurfaced baths
- Shower trays
- Wet room floors (ask us)
Do you need non-slip bath coating in Walwen?
Baths and trays are made smooth so they’re easy to clean, yet with soap and water on them they become slippery. Textured areas on older baths wear smooth too.
It’s worth getting a quote if you see:
- A bath or tray that is slippery when wet
- Bath mats that harbour mould or get forgotten
- Safety for older or less mobile people
- Resurfaced baths that are now too smooth
What your quote should include
- What happens if the damage is worse than the photos show
- Who turns up on the day
- The length of the guarantee and what it covers
- Whether the price is fixed and includes VAT
Walwen: your questions answered
How soon can you come?
Your quote comes with available dates. If it’s urgent, say so and we’ll do what we can.
Do you work for landlords and businesses?
Yes. We carry out repairs for homeowners, landlords, letting agents, builders and businesses.
What information do you need?
Some pictures, your postcode and how to reach you. On the day, we only need access to the room.
It’s been repaired before. Can you still fix it?
Typically, yes. We remove the old repair before doing a new one, so let us know about it.
Is a non-slip bath easy to clean?
Yes. A soft brush and mild cleaner is all it needs.
Is the work guaranteed?
Yes, for a year. If anything goes wrong with the repair within the year, we return to fix it.
Does someone need to be in?
Someone needs to let us in and show us the job. After that, you can carry on with your day.
Can tenants book a repair?
We can work for tenants, landlords or agents. Get your landlord’s agreement first.
Landlord and trade work in Walwen
Rented homes see more wear and tear, and replacing items every time a tenant leaves is expensive. A repair between tenancies is a cheaper way to keep the property in good order.
We also carry out snagging repairs for builders and developers, fixing chips and scratches before handover. We are CHAS, Constructionline and SafeContractor accredited.
What else we do in Walwen
Prices and what affects them
We charge the same across the UK, including Walwen. The price reflects:
- Whether old repairs or coatings need taking off
- The material and finish
- How many areas need work
- How easy the damage is to reach
Most people are surprised how affordable a repair is, particularly next to the cost of replacement. Photos let us give you the exact figure.
Getting a price from photos
Before you send photos, these tips help us give you a firm price:
- Whether it’s been repaired or coated before
- Natural light rather than flash
- The postcode, so we can plan the visit
- A picture taken from further back
There is no need for us to visit first. Photos are enough for us to price nearly every job: send a close-up, a wider shot and your postcode, and we will reply with a fixed price.
About our accreditations · Every repair comes with a one-year guarantee.
