Flintshire · England
Bath Re-enamelling in Walwen
Bath re-enamelling for Walwen, without a refit. Get a fixed quote from your pictures, then we come to you.
- Resurfacing from £350
- A bath in a colour that no longer suits
- Lots of chips and rust spots
Bath re-enamelling in Walwen, done in place
Re-enamelling gives a worn bath a new glossy surface without taking anything out. It’s the answer when the entire bath is tired rather than one spot. Common call-outs are for several chips and rust patches and an original cast iron bath that needs restoring, in Victorian roll-tops, basins & shower trays and acrylic baths.
Every job is backed for twelve months. We return to put right any problem with the work.
- Where
- Walwen (CH6, CH8)
- County
- Flintshire
- Guarantee
- A year, on every repair
- Price
- From £350. Fixed and free, based on photos
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
DIY repairs versus a professional job
If you are set on a kit, follow its instructions closely, ensure the area is clean and completely dry, and do not use it until it has fully cured. If it doesn’t work out, we can still repair it properly.
We understand the appeal of fixing it yourself. The risk is that a kit repair hides the damage for a while, then fails, and then the old filler has to be removed first.
Looking after it afterwards
It’s all simple stuff, just a few sensible habits:
- Respect the curing time we give you
- Never use suction bath mats
- Dry the bath after use to stop limescale
- Repair dripping taps early
A quick rinse and wipe after use helps, especially in hard water areas, so limescale cannot build up.
The longer worn enamel is left, the rougher it gets, and rust spots spread under the surface. Resurfacing sooner means less repair work first.
What your bath is made of matters
Pressed steel
Under the enamel of a steel bath is thin metal. Once a chip exposes it, rust follows quickly, so the metal is treated and sealed before the repair.
Cast iron
A cast iron bath is heavy enough that most people never want to move it. Only the enamel surface wears or chips, and that’s the part we put right.
When to call us in Walwen
The gloss on enamel is thin, and abrasive cleaning slowly wears it away. After years of use, the surface becomes porous and stains easily.
Send us a picture if you notice any of these:
- A bath that stays dull however much you clean it
- A bath in a colour that no longer suits
- Thin, worn enamel in places
- Stains that won’t shift
Comparing quotes
- How changes to the job are handled
- How your room will be protected
- Is the price fixed, and does it include VAT?
- The length of the guarantee and what it covers
Repair or replace in Walwen?
Getting a cast iron bath out is hard work: they’re heavy, frequently need breaking up, and a new one is not cheap. Re-enamelling avoids all of it. Our bath re-enamelling starts from £350. We do not add extras on the day. The price we quote from your photos is the price you pay, and if the damage turns out to be different, we discuss it before starting.
Why Walwen clients choose us
- Honest advice, even when it means no job
- Free fixed quotes from pictures
- Accredited with CHAS, Constructionline and SafeContractor
- We come to you, anywhere in the UK
See our prices page and resurfacing vs replacement cost guide.
How it works
Once we are through the door, we keep the work contained to the one room. We mask off everything nearby, the job takes most of the day, and we finish by cleaning up and talking you through the result.
- First we protect the bathroom and set up ventilation.
- We clean and degrease the bath and repair any chips or rust.
- We key the surface and put on a bonding primer.
- We spray several coats of new enamel finish.
- Once cured, normally by the following day, the bath is ready.
Preparing for the visit
- Mention any parking restrictions or tricky access
- Ensure the room can be ventilated
- Let the surface dry out before the visit
Get a quote
For most jobs, photos are all we need to give you a price. Tell us what happened and where you are, and we’ll reply with a fixed quote and the earliest dates we have.
Related advice
Common questions in Walwen
Can you do more than one item on the same visit?
Yes. Doing several items on one visit usually costs less than separate visits. Send photos of everything you’d like done.
When can you do it?
That depends on our diary for your area. Send pictures with your postcode and we’ll reply with the earliest dates.
Someone resurfaced my bath and it’s peeling. Can you help?
Yes. Stripping the old coating adds time, so it’s reflected in the quote.
Are you a vetted contractor?
We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.
How much does bath re-enamelling cost in Walwen?
Prices start from £350. The exact price depends on the damage, so we quote from pictures. You know the full cost before anything is booked.
Do I have to be there?
Yes. The technician needs access to the room for the visit, at a time we agree with you.
Is it worth repairing rather than replacing?
Generally, yes. A repair skips the removal, fitting and redecorating. If it is not worth repairing, we’ll tell you.
Do you need to take the bath out?
No. It’s re-enamelled where it stands, so the tiles and taps stay put.
More services for Walwen
How we price bath re-enamelling
Resurfacing from £350. Each job gets its own fixed quote. These are the things that affect it:
- The material
- Unusual colours or finishes
- The type of damage
- How many areas need work
A few things move the price: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Send photos and you will get a fixed figure.
Quotes from your pictures
Almost every job we do is priced from pictures. This is what to send:
- A clear, close picture of the problem area
- Good light, ideally daylight, without flash glare
- Whether it’s been repaired or coated before
- The material, if you know it
Email us pictures of the damage and one of the entire item, and tell us you are in Walwen, and we’ll reply with a fixed quote.
Landlord and trade work in Walwen
Letting agents frequently send us pictures straight from the inventory. You can have a price before you arrange access, and we can arrange access with the tenant directly if that helps.
Landlords, letting agents and housing providers in Walwen use us as well as householders. Repairing between tenancies keeps void periods short, and it typically costs far less than a refit.
Walwen and nearby
Walwen is about 4 miles north-west of Flint, in Flintshire. We travel to homes and businesses in Walwen, so you don’t need to take anything anywhere. Walwen is one of 139 towns and villages in Flintshire where we work. You can also see our page for Liverpool, about 14 miles away.
We cover every part of CH6 and CH8 and the streets around it. From Upper River Bank, Llys Maesteg and Bagillt Road or a nearby road, a technician can come to you. If you’re just outside Walwen, we cover Whelston (1 mile south-east), Gadlys (1 mile south), Bagillt (2 miles south-east), Nant-bâch (2 miles south) and Halkyn (3 miles south). Larger places within reach include Connah's Quay (7 miles south-east), Buckley (9 miles south-east), Bwcle (9 miles south-east), Saltney (13 miles south-east), Mold (8 miles south) and Lache (14 miles south-east).
What’s near Walwen
We visit homes around Ysgol Glan Aber C.P., Holy Trinity Church and The Victoria Inn. For rail, the closest station is Flint station, roughly 3.3 miles south-east of the centre. Well-known places in the area include Holywell Community Hospital (1.3 miles south-west) and St Winefride's Well Museum (1.2 miles west). Green spaces nearby include Cefn.
About our accreditations · Every repair comes with a one-year guarantee.
