Gwynedd · Wales
Non-Slip Bath Coating for Waterloo Port homes
Non-slip bath coating for Waterloo Port, without a refit. Send us photos for a fixed price, then we come to you.
- Safety for older or less mobile people
- Resurfaced baths that are now too smooth
- Bath mats that harbour mould or get forgotten
Non-slip bath coating at your home in Waterloo Port
It’s a clear, textured coating, so it shows only as a slightly matt area where you stand. It suits older people, families and holiday lets. If you’re dealing with bath mats that harbour mould or get forgotten and worn-out textured areas, we can help, on resurfaced baths, enamelled baths and shower trays alike.
You’re covered after we leave: each job carries a one-year guarantee, and we explain what it covers before you book. A soft brush and mild cleaner keep it clean. Avoid scourers on the coating.
- Area
- Waterloo Port (LL55)
- County
- Gwynedd
- Cover
- A year, on every repair
- Quotes
- Free, fixed price from pictures
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
Waterloo Port questions
Do you come to Waterloo Port?
We do. Repair technicians travel to Waterloo Port from across the region, with no extra charge for travel.
Is it messy?
No. The work area is masked and covered, and we leave the room clean.
Do you charge for travel?
There’s no separate call-out charge. Your fixed price includes everything.
Which areas do you work in?
We cover the whole UK, including Waterloo Port and the rest of Gwynedd. Send your postcode with your photos and we will confirm dates.
Do you do work for letting agents?
We do, regularly. We quote for multiple addresses and fit around tenancy changeovers.
Do you hold any accreditations?
Yes. Our accreditations include CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.
Can I add another job to the visit?
Yes, and it’s often cheaper. Send pictures of everything together and you’ll get one combined price.
It’s been repaired before. Can you still fix it?
Generally, yes. We remove the old repair before doing a new one, so mention it when you send photos.
What we can’t put right
Before booking, it’s worth knowing the limits too:
- Surfaces that are already damaged or peeling (these need repairing first)
- Textured areas still wet or recently cleaned with oily products
- Outdoor surfaces
If in doubt, send photos and we will say what we think before booking.
Surfaces we repair
- Acrylic baths
- Wet room floors (ask us)
- Resurfaced baths
- Shower trays
- Enamelled baths
What affects the price in Waterloo Port
Quotes are free and the price is fixed. What we look at:
- How much damage there is
- Unusual colours or finishes
- What kind of damage it is
- Access to the area
Instead of hourly rates, we price the whole job up front. It depends on the damage, the material and access, and combining items on one visit brings it down.
Send photos for a quote
You can generally get a fixed quote without us visiting. To make it quick:
- One picture of the whole bath or shower tray
- The material, if you know it
- Natural light rather than flash
- Your postcode, so we can check dates
There’s no need for us to visit first. Photos are enough for us to price nearly every job: we need a close-up, a wider picture and your postcode, and we will reply with a fixed price.
For landlords and businesses
Rented homes see more wear and tear, and replacing things at every changeover adds up. Repairing between tenants keeps the property presentable for less.
Hotels, guest houses and holiday lets need rooms back in use quickly, so we keep visits short and tidy. We’ll fit around changeovers where we can.
Should I try a DIY kit first?
If you do try a kit, read the instructions carefully and work on a clean, dry surface, and give it the full curing time. If it fails, we can still put it right.
If you’ve already tried a DIY fix, that is fine. We remove the old filler and start again, so it doesn’t stop a professional repair. It does add a little time, so tell us about it when you send photos.
The process
We begin by going over the job with you, so there are no surprises. Next, we cover and mask everything nearby and we start. You can expect it to take a few hours.
- We start by degreasing the area where you stand.
- The area to be treated is masked out.
- The clear textured coating is applied.
- We lift the masking for a clean edge.
- We leave it to cure, typically overnight.
How to prepare
- Let us know which floor the room is on
- Mention any earlier repairs or resurfacing
- Keep a parking space free if you can
Ask for a price
For most jobs, photos are all we need to give you a price. Tell us what happened and where you are, and we’ll reply with a fixed quote and the earliest dates we have.
Read more
Repairing versus replacing in Waterloo Port
Instead, you could go for replacing the bath or tray with a textured one, or relying on a mat that needs lifting and cleaning. A non-slip coating treats your existing bath or tray. We charge the same wherever you are, so there’s no premium for Waterloo Port. The job itself decides the price: how much damage, what it’s made of and how many items.
Why choose Surface Doctor in Waterloo Port
- We leave the room as we found it
- Honest advice, even when it means no job
- Nothing taken out or refitted
- One price list for the whole UK
See our prices page.
Common problems we fix in Waterloo Port
Smooth surfaces are easy to clean, yet wet, soapy surfaces are slippery. The textured patch on an older bath also wears down over time.
People normally call us after spotting something like this:
- Bath mats that harbour mould or get forgotten
- Resurfaced baths that are now too smooth
- Safety for older or less mobile people
- Worn-out textured areas
Comparing quotes
- Is the price fixed, and does it include VAT?
- If travel is included in the price
- When it can be used again
- Whether cleaning and preparation are in the price
Towns and villages near Waterloo Port
Also in Waterloo Port
Where we work around Waterloo Port
Waterloo Port is about 1 mile north of Caernarfon, in Gwynedd. We agree a date that works for you, and we will give you an arrival time in advance, so there is no waiting around. We work in all 165 towns and villages in Gwynedd. Our jobs stretch from Waterloo Port to Liverpool (about 58 miles away).
We work across the LL55 postcode area and the streets around it. Streets in the area include Bangor Road, Cambell Road and England Road North, and we cover them all. Nearby, we also work in Caernarfon (1 mile south), Llanbeblig (1 mile south), Caeathro (2 miles south-east), Brynsiencyn (2 miles north) and Llanidan (2 miles north). Further out, we also cover Bangor (7 miles north-east), Bethesda (9 miles east), Hirael (8 miles north-east), Upper Bangor (8 miles north-east), Glanadda (7 miles north-east) and Gerlan (9 miles east).
Near you in Waterloo Port
Around Waterloo Port, we work in homes near Former Christchurch (now Yr Hwylfan), Ysgol Syr Hugh Owen and Yr Alex pub. Other landmarks nearby include Ysbyty Gwynedd (5.7 miles north-east) and Twthill (0.7 miles south-west). Not far away are Llyn Rhos-ddu and Twthill.
- Parks and local facilities nearby include Seiont (1.5 miles south)
About our accreditations · Every repair comes with a one-year guarantee.
