Isle of Anglesey · Wales

Non-Slip Bath Coating in Wern y Wylan

Our technicians come to Wern y Wylan for clear non-slip coatings for baths and shower trays. Everything is done in place, and the work is guaranteed.

  • Bath mats that harbour mould or get forgotten
  • Resurfaced baths that are now too smooth
  • Worn-out textured areas
Surface Doctor technician refinishing the outside of a roll-top bath

Non-slip bath coating near Wern y Wylan

Non-slip bath coating in Wern y Wylan, done in place

It’s a clear, textured coating, so the bath looks much the same. It suits homes with older or less mobile people, holiday lets and families. Common call-outs are for safety for older or less mobile people and bath mats that harbour mould or get forgotten, across wet room floors (ask us), shower trays and enamelled baths.

You are covered for a year from the day of the repair. If anything isn’t right, ring us and we will come back. Clean with a soft brush and a mild cleaner. Don’t use abrasive pads on the textured area.

Where
Wern y Wylan (LL58)
Region
Isle of Anglesey
Cover
12 months on all our work
Quote
Free, fixed price from pictures
Phone
0345 017 0787
Last updated
23 October 2026
Stained shower tray resurfaced to clean white, before and after

For landlords and businesses

Builders, developers and site managers book us for snagging repairs, fixing chips and scratches before handover. We hold CHAS, Constructionline and SafeContractor accreditations.

We regularly work with letting and managing agents. Send the address, pictures and access details and we will arrange it.

How we price non-slip bath coating

Prices are worked out job by job. What matters most is:

  • Unusual colours or finishes
  • How much damage there is
  • What the surface is made of
  • Doing more than one item at once

We do not add extras on the day. What we quote from your photos is what you pay, unless the damage turns out to be different, in which case we talk to you first.

Send photos for a quote

We price nearly every job from photos. This is what we need:

  • A wider photo showing the whole bath or shower tray
  • Something in shot to show the size
  • A close-up of the damage, in focus
  • Where you are, by postcode

Upload pictures of the damage and one of the entire item, with your LL58 postcode, and we’ll come back with a fixed quote.

When we’d advise against a repair

A few problems are outside what a surface repair can do:

  • Surfaces that are already damaged or peeling (these need repairing first)
  • Textured areas still wet or recently cleaned with oily products
  • Outdoor surfaces

Not sure? Send pictures and we will give you a straight answer before you book.

Surfaces we repair

  • Resurfaced baths
  • Acrylic baths
  • Enamelled baths
  • Wet room floors (ask us)
  • Shower trays

Repair or replace: which is better?

The alternatives are replacing the bath or tray with a textured one, or relying on a mat that needs lifting and cleaning. A coating treats your existing bath or tray. It helps to know what pushes a price up or down: access, material, the extent of the damage and whether we can do several items together. Photos let us give you a fixed figure.

What you get with us

  • CHAS and Constructionline accredited
  • Most jobs done in one visit
  • Honest advice, even when it means no job
  • One-year guarantee on every repair

Read our full price list.

Covering Wern y Wylan

Wern y Wylan is about 5 miles north of Bangor, in Isle of Anglesey. We work in every kind of home, old or new, large or small, as well as offices, shops and holiday lets. Wern y Wylan is one of 115 towns and villages in Isle of Anglesey we cover. We work right across the region, from Wern y Wylan to Liverpool (51 miles away).

Here we cover the LL58 postcode area. We also cover the places around Wern y Wylan: Llanddona (1 mile east), Llansadwrn (2 miles south), Sling (2 miles south-east), Pen-y-garnedd (2 miles south-west) and Cwm Cadnant (2 miles south). Further out, we also cover Llangefni (7 miles west), Menai Bridge (4 miles south), Porthaethwy (5 miles south), Amlwch (11 miles north-west), Llanfair Pwllgwyngyll (5 miles south) and Benllech (3 miles north-west).

What’s near Wern y Wylan

Typical jobs here are in homes near St Dona's Church and Owain Glyndwr pub. Further afield, we also cover the area around Castell Aberlleiniog (3.3 miles east) and Minffordd Hospital (5.5 miles south). The countryside around Wern y Wylan includes Mynydd Llwydiarth and Llangoed and Aberlleiniog Common Local Nature Reserve.

Map of Wern y Wylan © OpenStreetMap contributors

Questions from Wern y Wylan

What areas do you cover?

The entire UK, including all of Isle of Anglesey. Just include your postcode and we’ll confirm dates.

Is there a guarantee?

Yes, for a year. If there’s a problem with the work in that time, we come back and put it right.

Is a non-slip bath easy to clean?

Yes. A soft brush and mild cleaner is all it needs.

Will a non-slip coating change how my bath looks?

Only slightly: the treated area looks slightly matt.

Are you accredited?

We’re accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.

Do I need to be at home?

We need someone to let us in. After that, you can carry on with your day.

Do the materials smell?

Some materials have a smell while they’re applied. It fades as everything cures.

Is it OK to have pets in the house?

Please keep children and pets out of the room during the visit. Everywhere else in the home is fine.

Should I try a DIY kit first?

It’s natural to want to try a repair yourself. The trouble is that kit repairs often look fine at first and then fail, and the old filler has to come out before a proper repair.

What a professional repair adds is preparation, colour matching and finishing. We prepare the area properly, mix the colour on site and polish the finish to match, and the work is guaranteed.

What happens on the day

Visits start with a quick look at the job together. After that, protection goes down around the work area and we start. It normally takes a few hours.

  1. We clean and degrease the standing area.
  2. The area to be treated is masked out.
  3. We put on the clear non-slip coating.
  4. The masking comes off to leave a neat edge.
  5. The coating is left to cure before use, normally overnight.

Preparing for the visit

  • Mention if the room is upstairs or in a flat
  • Move bottles, mats and clutter away from the area
  • Let us know if it has been repaired before

Ask for a price

We price from photos so you don’t have to wait in for a survey. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through.

Send photos for a quote

Advice

What we’re called out for in Wern y Wylan

Baths and trays are made smooth so they’re easy to clean, but wet, soapy surfaces are slippery. Textured areas on older baths wear smooth too.

Signs it’s time to call us include:

  • Bath mats that harbour mould or get forgotten
  • Resurfaced baths that are now too smooth
  • Worn-out textured areas
  • A bath or tray that is slippery when wet

Before booking anyone

  • What aftercare is recommended
  • Whether the colour is mixed to match
  • How changes to the job are handled
  • Whether there are any call-out or travel charges

10 questions to ask before booking

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.