Cumbria · England

Non-slip bath & shower coating in Wharton, Cumbria

Non-slip bath coating across Wharton and nearby, normally in one visit and guaranteed for a year.

  • A bath or tray that is slippery when wet
  • Resurfaced baths that are now too smooth
  • Bath mats that harbour mould or get forgotten
Surface Doctor technician refinishing the outside of a roll-top bath

Book non-slip bath coating in Wharton

How we price non-slip bath coating

You’ll know the full cost before booking. We take into account:

  • Whether old repairs or coatings need taking off
  • What the surface is made of
  • How many areas need work
  • How easy the damage is to reach

Our prices are the same across the UK, so there is no premium for Wharton. The job itself decides the price: how much damage, what it’s made of and how many items.

Getting a price from photos

Before you send photos, a few simple things make all the difference:

  • The material, if you know it
  • Any earlier repairs or coatings
  • Good light, ideally daylight, without flash glare
  • Your postcode, so we can check dates

Call 0345 017 0787 or use the quote form. With one close-up and one wider picture, we can give you a fixed quote without visiting.

Non-slip bath coating in Wharton without replacing anything

The coating is clear and textured, so it shows only as a slightly matt area where you stand. It’s popular with older people, families and holiday lets. Typical jobs include a bath or tray that is slippery when wet and bath mats that harbour mould or get forgotten, in enamelled baths, acrylic baths and shower trays.

Big or small, you get the same one-year guarantee in Wharton and across Cumbria. A soft brush and mild cleaner keep it clean. Don’t use abrasive pads on the textured area.

Before and after: an old shower tray refinished by Surface Doctor
Area
Wharton (CA17)
County
Cumbria
Guarantee
One year on every repair
Quotes
Free and fixed, from your photos
Telephone
0345 017 0787
Updated
23 October 2026

Repair or replace: which is better?

Instead, you could go for a new textured bath or tray, or a bath mat, which traps water and needs cleaning. A non-slip coating adds grip to the bath you have. A few things move the price: access, material, the extent of the damage and whether we can do several items together. Photos let us give you a fixed figure.

Why choose Surface Doctor in Wharton

  • Free fixed quotes from pictures
  • Straight answers about what a repair can do
  • No need to remove anything
  • Rooms protected and left tidy

See our full price list.

What we can’t put right

It helps to know what we can’t do too:

  • Surfaces that are already damaged or peeling (these need repairing first)
  • Textured areas still wet or recently cleaned with oily products
  • Outdoor surfaces

Send us photos and we will tell you honestly.

Surfaces we repair

  • Wet room floors (ask us)
  • Acrylic baths
  • Enamelled baths
  • Shower trays
  • Resurfaced baths

Landlords, agents and businesses in Wharton

We carry out planned and one-off repairs for housing associations and facilities teams in Cumbria and across the UK. Repairing in place avoids the disruption of a replacement, which is easier on the people living there.

Hospitality businesses need rooms back in use quickly, so most of our work is done in a single visit. We can work around your bookings.

What we are called out for in Wharton

Smooth surfaces are easy to clean, but wet, soapy surfaces are slippery. Textured areas on older baths wear smooth too.

Look out for any of the following:

  • A bath or tray that is slippery when wet
  • Safety for older or less mobile people
  • Worn-out textured areas
  • Resurfaced baths that are now too smooth

Comparing quotes

  • What happens if they find more damage
  • What the guarantee covers, and for how long
  • What preparation is included
  • Is the price fixed, and does it include VAT?

Choosing a repair company

Wharton and nearby

Wharton is about 17 miles north-east of Kendal, in Cumbria. Whether you are in the middle of Wharton or on the outskirts, the service is the same: a fixed price, a tidy visit and a guarantee. We work in 438 places across Cumbria. We work right across the region, from Wharton to Newcastle upon Tyne (48 miles away).

Every address in CA17 is within our area. Neighbouring places we cover include Kirkby Stephen (2 miles north), Waitby (2 miles north-west), Smardale (3 miles north-west), Ravenstonedale (3 miles west) and Greenside (3 miles west). We also work in nearby towns such as Appleby-in-Westmorland (11 miles north-west), Sedbergh (11 miles south-west), Bongate (10 miles north-west) and Shap (14 miles north-west).

Around Wharton

Around Wharton, we work in homes near Kirkby Stephen Grammar School and the streets around them. The closest station to Wharton is Kirkby Stephen station, about 1 mile north. Further afield, we also cover the area around Lammerside Castle (within half a mile south-east). Green spaces nearby include Birkett Common.

Map of Wharton © OpenStreetMap contributors

FAQs for Wharton

What information do you need?

A close-up, a wider photo and your postcode. After that, we just agree a date.

Do the materials smell?

Expect a mild smell while we’re working.

Is there a guarantee?

Yes: twelve months. If anything goes wrong with the repair within the year, we return to fix it.

Do you charge for travel?

No. Our quotes include travel, and we charge the same wherever you are.

Will a non-slip coating change how my bath looks?

Only slightly: it shows as a matt area where you stand.

Is repairing better than replacing?

Normally, if the item is otherwise sound. Repairing avoids the cost and disruption of replacing. If replacing would be better, we’ll say so.

Do I have to be there?

Yes. The technician needs access to the room for the visit, at a time we agree with you.

Do you do work for letting agents?

Yes. We carry out repairs for homeowners, landlords, letting agents, builders and businesses across Cumbria.

The process

You don’t need to empty the room beforehand. Everything we use comes in the van with us, put protection down and start once you’re happy with the plan. Most jobs take a few hours, and you can get on with other things while we are there.

  1. We clean and degrease the standing area.
  2. The area to be treated is masked out.
  3. We put on the clear non-slip coating.
  4. The masking comes off to leave a neat edge.
  5. We leave it to cure, normally overnight.

Preparing for the visit

  • Plan for the room to be out of bounds to pets and children
  • Let us know if it has been repaired before
  • Make sure the room can be ventilated

Ask for a price

For a price in Wharton, pictures are the quickest way: a close-up, a wider shot and your postcode. We reply with a fixed quote and our next available dates.

Get a fixed quote

Read more

Can I fix it myself?

It’s natural to want to try a repair yourself. The trouble is that kit repairs frequently look fine at first and then fail, and then the old filler has to be removed first.

If you are set on a kit, follow its instructions closely, and give it the full curing time. If it fails, we can still put it right.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.