Warwickshire · England
Non-slip bath & shower coating in Whitestone, Warwickshire
Non-slip bath coating across Whitestone and nearby, typically in one visit.
- A bath or tray that is slippery when wet
- Safety for older or less mobile people
- Worn-out textured areas
How we handle non-slip bath coating in Whitestone
It’s popular with older people, families and holiday lets. The coating is clear and textured, so the bath looks much the same. If you are dealing with a bath or tray that is slippery when wet and safety for older or less mobile people, we can help, whatever the material.
The work is guaranteed for twelve months. If something is not right in that time, we come back and put it right. A soft brush and mild cleaner keep it clean. Avoid scourers on the coating.
- Location
- Whitestone (CV11, CV12)
- Region
- Warwickshire
- Guarantee
- 12 months on all our work
- Quote
- Free and fixed, from your pictures
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
Repair or replace in Whitestone?
Instead, you could go for replacing the bath or tray with a textured one, or relying on a mat that needs lifting and cleaning. A coating adds grip to the bath you have. Set against the cost of replacement, a repair is usually a fraction of the price, because nothing has to be taken out, refitted or made good. Your fixed quote shows exactly what’s included.
What you get with us
- CHAS and Constructionline accredited
- One-year guarantee on every repair
- Technicians who travel to you, UK-wide
- Normally one visit, start to finish
Take a look at our pricing.
Landlords, agents and businesses in Whitestone
We also carry out snagging repairs for builders and developers, fixing chips and scratches before handover. We hold CHAS, Constructionline and SafeContractor accreditations.
For developers and builders, we fix damage before handover, saving last-minute replacements. Several plots can be done in one visit to keep costs down.
DIY repairs versus a professional job
If you do try a kit, read the instructions carefully and work on a clean, dry surface, and do not use it until it has fully cured. If it doesn’t work out, we can still repair it properly.
What a professional repair adds is preparation, colour matching and finishing. We prepare the area properly, mix the colour on site and polish the finish to match, then guarantee it for a year.
What we do, step by step
From the moment we arrive, we keep the work contained to the one room. Surfaces nearby are masked off, the job takes a few hours, depending on what we find, and we finish by cleaning up and talking you through the result.
- We start by degreasing the area where you stand.
- The area to be treated is masked out.
- The clear textured coating is applied.
- The masking comes off to leave a neat edge.
- The coating is left to cure before use, normally overnight.
Before we arrive
- Avoid using the area for a few hours before we arrive
- Keep pets and children out of the room while we work
- Tell us about any previous repairs or coatings
Ask for a price
Getting a quote takes a couple of minutes: photograph the damage, then the whole bath or shower tray, add your postcode and send them to us. What comes back is a fixed quote, not a guess.
Related advice
How we price non-slip bath coating
Prices are worked out job by job, from your pictures. The main factors are:
- Whether old repairs or coatings need taking off
- How easy the damage is to reach
- The material and finish
- How many areas need work
A few things move the price: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Send photos and you’ll get a fixed figure.
Getting a price from pictures
Before you send pictures, a few simple things make all the difference:
- Something in shot to show the size
- A photo taken from further back
- Natural light rather than flash
- Where you are, by postcode
No survey visit is needed: we price from photos. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through, and you will get a fixed figure back.
Common problems we fix in Whitestone
Smooth surfaces are easy to clean, but with soap and water on them they become slippery. The textured patch on an older bath also wears down over time.
Typical reasons for a call-out include:
- Bath mats that harbour mould or get forgotten
- Worn-out textured areas
- Safety for older or less mobile people
- Resurfaced baths that are now too smooth
Comparing quotes
- Whether there are any call-out or travel charges
- What aftercare is recommended
- Whether cleaning and preparation are in the price
- When it can be used again
Your questions about non-slip bath coating in Whitestone
How do I get a price for non-slip bath coating in Whitestone?
The exact price depends on the damage, so we quote from pictures. You know the full cost before anything is booked.
Can you repair something that is been repaired before?
Generally, yes. Let us know what was used before and we’ll plan for it.
Do I have to be there?
We need someone to let us in. You don’t need to watch us work.
Which areas do you work in?
We cover the whole UK, including Whitestone and the rest of Warwickshire. Just include your postcode and we’ll confirm dates.
Is the work guaranteed?
Yes, for a year. If there’s a problem with the work in that time, we come back and put it right.
Can I get a quote without a visit?
Typically, yes. Clear pictures let us give you a fixed quote without visiting.
What happens after I send photos?
We check the damage, the material and your postcode, then reply with a quote and the next dates we have.
Will it make a mess?
We protect the room with dust sheets and masking first, and we clean up when we’ve finished.
When a repair isn’t the answer
A few problems are outside what a surface repair can do:
- Surfaces that are already damaged or peeling (these need repairing first)
- Textured areas still wet or recently cleaned with oily products
- Outdoor surfaces
Not sure? Send photos and we will give you a straight answer before booking.
What we work on
- Acrylic baths
- Shower trays
- Resurfaced baths
- Enamelled baths
- Wet room floors (ask us)
Covering Whitestone
Whitestone is about 2 miles south-east of Nuneaton, in Warwickshire. From the centre of Whitestone to the outlying streets, the service is the same: fixed prices, tidy work and a one-year guarantee. Whitestone is one of 324 places in Warwickshire we cover. Our nearest city page is Birmingham, about 19 miles away.
We cover every part of CV11 and CV12 and the streets around it. Local streets include Quarry Lane, Crowhill Road and Purcell Avenue. We also travel to Attleborough (1 mile north-west), Horeston Grange (1 mile north), Chilvers Coton (1 mile north-west), St Nicolas Park (2 miles north) and Nuneaton (2 miles north-west). Further out, we also cover Rugby (12 miles south-east), Royal Leamington Spa (15 miles south), Bedworth (3 miles south-west), Leamington Spa (15 miles south), Kenilworth (12 miles south-west) and Fordbridge (13 miles west).
Landmarks near Whitestone
Locally, our jobs take us to homes close to Church of the Holy Trinity, Whitestone Infant School and The George Eliot School and the streets around them. Whitestone’s nearest station is Bermuda Park station, about 1.6 miles west of the centre. Other landmarks nearby include George Eliot Hospital (1.7 miles west) and George Eliot Hospital Museum (1.7 miles west).
Also near Whitestone
What else we do in Whitestone
About our accreditations · Every repair comes with a one-year guarantee.
