Northumberland · England
Non-Slip Bath Coating for Wooler homes
Non-slip bath coating for Wooler, without a refit. Send us photos for a fixed quote, then book a visit.
- Worn-out textured areas
- Bath mats that harbour mould or get forgotten
- Safety for older or less mobile people
Non-slip bath coating in Wooler without replacing anything
It’s a clear, textured coating, so the bath looks much the same. It suits homes with older or less mobile people, holiday lets and families. We work on wet room floors (ask us), enamelled baths and resurfaced baths, and common reasons people get in touch are resurfaced baths that are now too smooth and worn-out textured areas.
You are covered for a year from the day of the repair. If anything isn’t right, ring us and we will come back. A soft brush and mild cleaner keep it clean. Don’t use abrasive pads on the textured area.
- Where
- Wooler (NE71)
- Area hub
- Northumberland
- Cover
- A year, on every repair
- Quote
- Fixed and free, based on photos
- Call
- 0345 017 0787
- Updated
- 23 October 2026
How it works
We agree an arrival time beforehand, so you’re not left guessing. Once we’re there, the work takes a morning or an afternoon in most cases. The room is left tidy and you’ll know when it can be used.
- First the standing area is cleaned and degreased.
- We mask out the area to be treated.
- We put on the clear non-slip coating.
- We lift the masking for a clean edge.
- Once it has cured, normally overnight, it’s ready.
Before we arrive
- Have somewhere for us to park nearby if possible
- Keep children and pets away from the room on the day
- Mention any parking restrictions or tricky access
Ask for a price
Upload a picture of the damage and a wider shot of the whole item, with your NE71 postcode, and we’ll come back with a fixed quote.
Related advice
Towns and villages near Wooler
More services for Wooler
Landlords, agents and businesses in Wooler
For developers and builders, we fix damage before handover, so there’s no need to replace a damaged item at the last minute. Several plots can be done in one visit to keep costs down.
Rented homes see more wear and tear, and replacing things at every changeover adds up. A repair between tenancies is a cheaper way to keep the property in good order.
When a repair is not the answer
Some problems need a builder, plumber or fitter rather than us:
- Surfaces that are already damaged or peeling (these need repairing first)
- Textured areas still wet or recently cleaned with oily products
- Outdoor surfaces
Not sure? Send photos and we will give you a straight answer.
What we work on
- Enamelled baths
- Wet room floors (ask us)
- Resurfaced baths
- Shower trays
- Acrylic baths
Repair or replace in Wooler?
The alternatives are replacing the bath or tray with a textured one, or relying on a mat, which traps water and needs cleaning. A coating treats your existing bath or tray. A repair is priced on what needs doing, not where you live. You’ll see the full price before you book, with nothing added on the day.
What you get with us
- We’ll tell you if it’s not worth repairing
- One-year guarantee on every repair
- Repair technicians who travel to you, UK-wide
- Accredited with CHAS, Constructionline and SafeContractor
Take a look at our pricing.
Wooler and the surrounding area
Wooler is about 15 miles south of Berwick-upon-Tweed, in Northumberland. Wherever you are in the NE71 postcode area, a technician comes to you. We work in all 189 towns and villages across Northumberland. You can also see our page for Newcastle upon Tyne, about 41 miles away.
Jobs in NE71 work the same way as everywhere else we cover. Streets in the area include High Street, Market Place and Station Road, and we cover them all. Being close to the A697 and B6348, Wooler is easy for our repair technicians to reach. Other places close to Wooler include Akeld (2 miles north-west), Doddington (3 miles north), Chatton (4 miles east), Milfield (5 miles north-west) and Roddam (5 miles south). Larger places within reach include Berwick-upon-Tweed (15 miles north), Alnwick (15 miles south-east), Coldstream (12 miles north-west), Seahouses (14 miles east), East Ord (14 miles north) and Spittal (14 miles north).
What’s near Wooler
Around Wooler, we work in homes near The Black Bull pub, Church of St Mary and Wooler First School, among other places. Further afield, we also cover the area around Cheviot Museum And Field Centre (within half a mile south-west) and Wooler Castle (within half a mile south-east). Green spaces nearby include White Law.
Common questions in Wooler
Will there be a smell?
It depends on the job, but frequently a little. Ventilation keeps it to a minimum.
Is my repair covered?
Yes: twelve months. If there’s a problem with the work in that time, we come back and put it right.
Can pets and children be at home?
Please keep children and pets out of the room during the visit. Everywhere else in the home is fine.
Do you cover the whole of Northumberland?
Everywhere in the UK, Wooler included. There is no extra charge for travel.
How do I book?
Use the quote form or ring 0345 017 0787, and we will take it from there.
Will it make a mess?
Dust sheets and masking go down before we start, and we clean up when we have finished.
Do I have to be there?
Someone needs to let us in and show us the job. After that, you can carry on with your day.
Is it worth repairing rather than replacing?
In most cases, yes. A repair skips the removal, fitting and redecorating. If it isn’t worth repairing, we will tell you.
Signs you need non-slip bath coating in Wooler
Smooth surfaces are easy to clean, but wet, soapy surfaces are slippery. The textured patch on an older bath also wears down over time.
Common reasons people in Wooler contact us include:
- Bath mats that harbour mould or get forgotten
- Worn-out textured areas
- A bath or tray that is slippery when wet
- Safety for older or less mobile people
What to look for in a quote
- How your room will be protected
- When it can be used again
- The length of the guarantee and what it covers
- Aftercare advice
What affects the price in Wooler
There’s no charge for travel to Wooler. The price depends on:
- Access to the area
- Any earlier repairs that need removing first
- The colour and finish to match
- The material
What it costs depends on how much damage there is and what kind, what it’s made of and how many items we do on one visit. We give a fixed price from your photos, so there are no surprises on the day.
Quotes from your pictures
Phone photos are fine. Make sure they show:
- The material, if you know it
- A wider photo showing the entire bath or shower tray
- Something in shot to show the size
- One sharp close-up of the damage
Pricing is simple: take a close-up of the damage and a picture from further back, send them to us with your postcode, and we’ll reply with a fixed quote. Quotes are free and you are under no obligation.
Should I try a DIY kit first?
If you’ve already tried a DIY fix, that’s fine. We remove the old filler and start again, so it will not stop us repairing it. It does add a little time, so tell us about it when you send pictures.
Kits are cheap and easy to find, but many of the jobs we do start with putting right a DIY repair. Getting it right first time is generally cheaper.
About our accreditations · Every repair comes with a one-year guarantee.
