Bath and North East Somerset · England
Non-slip bath & shower coating in Woollard, Bath and North East Somerset
Clear non-slip coatings for baths and shower trays at your home in Woollard, with a one-year guarantee on every repair.
- Safety for older or less mobile people
- Bath mats that harbour mould or get forgotten
- A bath or tray that is slippery when wet
How we price non-slip bath coating
Quotes are free and the price is fixed. What we take into account:
- Whether it’s a chip, crack, burn or wear
- The size and number of damaged areas
- Previous DIY repairs that have to come out
- The material
Every job is a little different, so each one is priced on its own. The size and type of damage, the material and access all play a part, and combining jobs on one visit brings the cost down.
Quotes from your photos
It only takes a minute to photograph the damage. Please include:
- What it’s made of, if you know
- Whether it’s been repaired or coated before
- Natural light rather than flash
- Where you are, by postcode
Ring 0345 017 0787, or send us photos through the quote form. With one close-up and one wider picture, we can give you a fixed price the same day in most cases.
About our non-slip bath coating in Woollard
It’s a clear, textured coating, so it shows only as a slightly matt area where you stand. It’s popular with older people, families and holiday lets. We regularly repair acrylic baths, wet room floors (ask us) and resurfaced baths, and the jobs we see most are worn-out textured areas and resurfaced baths that are now too smooth.
The work is guaranteed for twelve months. If there is a problem with the repair within the year, we return and sort it. Clean with a soft brush and a mild cleaner. Don’t use abrasive pads on the textured area.
- Location
- Woollard (BS39)
- Area hub
- Bath and North East Somerset
- Cover
- A year, on every repair
- Quote
- Free, fixed quote from pictures
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
For landlords and businesses
We also carry out snagging repairs for builders and developers, putting right damage done during fitting so nothing needs replacing. We are CHAS, Constructionline and SafeContractor accredited.
If you manage property in Woollard, we will quote for several properties at once. Just send pictures for each address and we will price them together.
Repair or replace in Woollard?
The alternatives are replacing the bath or tray with a textured one, or a bath mat, which traps water and needs cleaning. A non-slip coating treats your existing bath or tray. Compared with replacing, repairing generally costs far less, because nothing has to be taken out, refitted or made good. The quote lists exactly what you’re paying for.
Why Woollard customers choose us
- Free fixed quotes from pictures
- Rooms protected and left tidy
- A year’s guarantee on all work
- Everything repaired in place
Take a look at our full price list.
Your questions about non-slip bath coating in Woollard
Can you repair something that is been repaired before?
Yes, regularly. It can add a little time, which we include in the quote.
When can you do it?
It depends on the time of year and where you are. Send pictures with your postcode and we will reply with the earliest dates.
Do you hold any accreditations?
Yes, including CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.
How do I book?
A close-up, a wider photo and your postcode. Then we’ll agree a date.
Do you come to Woollard?
Yes, we do. Repair technicians travel to Woollard from across the region, with no extra charge for travel.
How do I get a price for non-slip bath coating in Woollard?
Because every job differs, we price from photos. You know the full cost before anything is booked.
Do you do work for letting agents?
We do, regularly. We can quote for several properties together and work between tenancies.
Will I see the coating?
Only slightly: it shows as a matt area where you stand.
Do you need non-slip bath coating in Woollard?
Baths and trays are made smooth so they’re easy to clean, yet wet, soapy surfaces are slippery. Textured areas on older baths wear smooth too.
People generally call us when they notice something like this:
- A bath or tray that is slippery when wet
- Safety for older or less mobile people
- Worn-out textured areas
- Resurfaced baths that are now too smooth
What to look for in a quote
- What happens if the damage is worse than the photos show
- What preparation is included
- How soon you can use it again
- Whether they match the colour on site
When we’d advise against a repair
A repair isn’t always the answer, and we will tell you before we start. We cannot fix:
- Surfaces that are already damaged or peeling (these need repairing first)
- Textured areas still wet or recently cleaned with oily products
- Outdoor surfaces
If in doubt, send pictures and we’ll say what we think before you book.
Materials we work on in Woollard
- Enamelled baths
- Wet room floors (ask us)
- Resurfaced baths
- Acrylic baths
- Shower trays
Can I fix it myself?
If you do try a kit, read the instructions carefully and work on a clean, dry surface, and give it the full curing time. If it doesn’t work out, we can still repair it properly.
What a professional repair adds is preparation, colour matching and finishing. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, and the work is guaranteed.
What else we do in Woollard
How the visit works
It’s a tidy, low-fuss visit. We agree the arrival time in advance, protect the area, and get on with the job, which typically takes a few hours. If we find something your pictures didn’t show, we’ll explain it before carrying on.
- We clean and degrease the standing area.
- We mask out the area to be treated.
- We apply the clear textured coating.
- We remove the masking for a neat edge.
- We leave it to cure, generally overnight.
Before we arrive
- Make sure the room can be ventilated
- Move bottles, mats and clutter away from the area
- Let us know if it has been repaired before
Ask for a price
You don’t need a survey visit. Nearly every job can be priced from pictures: send a close-up, a wider shot and your postcode, and we will reply with a fixed quote.
Read more
Our work in Woollard
Woollard is about 3 miles south-west of Keynsham, in Bath and North East Somerset. Jobs in Woollard are booked in like any other job: a fixed quote from photos, then a visit to do the work. Woollard is one of 136 places in Bath and North East Somerset where we work. Our jobs stretch from Woollard to Birmingham (about 80 miles away).
Our repair technicians cover all of the BS39 postcode area and the streets around it. You’ll find streets such as Mill Lane, Publow Lane and Woollard Lane, all of which we cover. Nearby, we also work in Publow (1 mile west), Compton Dando (1 mile east), Pensford (1 mile south-west), Belluton (1 mile west) and Lypiatt (1 mile north). Larger places within reach include Bath (7 miles east), Keynsham (3 miles north-east), Bathwick (8 miles east), Walcot (8 miles east), Westmoreland (6 miles east) and Kingsmead (7 miles east).
Landmarks near Woollard
Around Woollard, we work in homes near Pensford Primary School, George And Dragon Public House and Church of All Saints, among other places. The closest station to Woollard is Keynsham station, about 3.1 miles north-east. A little further out are South Bristol Community Hospital (3.4 miles north-west) and Oval enclosure (3.9 miles south-west). Green spaces nearby include Hunstrete Lake and Stephen's Vale Nature Reserve.
About our accreditations · Every repair comes with a one-year guarantee.
