Bath and North East Somerset · England
Bath Re-enamelling in Woollard
Full bath re-enamelling and resurfacing at your home in Woollard, with a one-year guarantee on every repair.
- Resurfacing from £350
- An original cast iron bath that needs restoring
- A coating lifting around the plughole
Should I try a DIY kit first?
A kit can be fine for a tiny mark out of sight. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, a professional repair is worth it.
DIY kits are sold for most surfaces, and they can tidy up a tiny mark. The trouble is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler frequently lifts.
Bath re-enamelling at your home in Woollard
The bath stays where it is, so your taps, tiles and plumbing are left alone. Most baths are done in one visit, and can be used again the day after. We regularly repair acrylic baths, Victorian roll-tops and cast iron baths, and the jobs we see most are lots of chips and rust spots and a bath that stays dull however much you clean it.
The work is covered for a year after we finish. Just call us if there’s a problem and we’ll come back.
- Location
- Woollard (BS39)
- Region
- Bath and North East Somerset
- Warranty
- A year, on every repair
- Quote
- From £350. Fixed and free, based on pictures
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
Common questions in Woollard
Can a failed resurfacing be redone?
Yes. Removing the old finish takes extra time, which we include in the price.
Do you need to take the bath out?
Not at all. Everything is done in your bathroom, with the room protected and ventilated.
Can you do more than one item on the same visit?
Of course, and it generally saves money. Just add the extra items to your photos and you’ll get one combined price.
When can you do it?
That depends on our diary for your area. We’ll offer you dates when we send your quote.
Which areas do you work in?
We work UK-wide, and that includes Woollard. Our prices are the same everywhere.
Are you a vetted contractor?
Yes, including CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.
Do you come to Woollard?
Yes. We work across the UK and travel to Woollard and the rest of Bath and North East Somerset. Send pictures and we’ll quote, or call 0345 017 0787.
Do you work for landlords and businesses?
Yes. We work for landlords, agents, builders and businesses as well as homeowners.
Honest limits
We would rather lose a job than do one that won’t last, so here’s what a repair can’t put right:
- Leaks from fittings rather than the bath
- Problems we can’t see until an old finish comes off
- A metal bath with a through crack
Send us photos and we will tell you honestly.
Surfaces we repair
- Pressed steel baths
- Acrylic baths
- Victorian roll-tops
- Basins & shower trays
- Cast iron baths
More services for Woollard
Repair or replace: which is better?
There are times replacing is better: a cracked-through bath, a change of size or shape, or a full refit. In most other cases, resurfacing is the better choice. Prices start from £350. Rather than charging by the hour, we price the whole job up front. It depends on the damage, the material and access, and combining items on one visit brings it down.
Why choose Surface Doctor in Woollard
- Colours mixed by hand to suit your surface
- We come to you, anywhere in the UK
- Everything repaired in place
- CHAS, Constructionline and SafeContractor accredited
See our pricing and guide to resurfacing and replacement costs.
What happens on the day
On the day, the technician arrives at the agreed time, protects the room with dust sheets and masking and gets started. The job usually takes most of the day. We clean up when we are done and let you know when you can use it again.
- First we protect the bathroom and set up ventilation.
- We clean and degrease the bath and repair any chips or rust.
- We prepare the surface and apply a bonding primer.
- We spray several coats of new enamel finish.
- Once cured, normally by the following day, the bath is ready.
Getting ready for the visit
- Mention any parking restrictions or tricky access
- Move bottles, mats and clutter away from the area
- Mention any earlier repairs or resurfacing
How to get a price
We price from pictures so you don’t have to wait in for a survey. Use the quote form, or ring 0345 017 0787 to talk it through, and you’ll get a fixed figure back.
Advice
Covering Woollard
Woollard is about 3 miles south-west of Keynsham, in Bath and North East Somerset. Whether you are in the middle of Woollard or on the outskirts, the service is the same: fixed prices, tidy work and a one-year guarantee. Woollard is one of 136 towns and villages in Bath and North East Somerset where we work. Our jobs stretch from Woollard to Birmingham (80 miles away).
Jobs in BS39 are booked in the same way as anywhere else. We regularly work on streets such as Mill Lane, Publow Lane and Woollard Lane and the roads around them. Close by, we cover Publow (1 mile west), Compton Dando (1 mile east), Pensford (1 mile south-west), Belluton (1 mile west) and Lypiatt (1 mile north). Further out, we also cover Bath (7 miles east), Keynsham (3 miles north-east), Bathwick (8 miles east), Walcot (8 miles east), Westmoreland (6 miles east) and Kingsmead (7 miles east).
Near you in Woollard
In Woollard, that means homes near Pensford Primary School, George And Dragon Public House and Church of All Saints. The nearest railway station is Keynsham station, roughly 3.1 miles north-east. Other landmarks nearby include South Bristol Community Hospital (3.4 miles north-west) and Oval enclosure (3.9 miles south-west). For a walk, there is Hunstrete Lake and Stephen's Vale Nature Reserve.
For landlords and businesses
For anyone letting property in or around Woollard, we’ll quote for several properties at once. Send photos for each one and we’ll come back with a combined price.
We work for landlords, letting agents and housing providers in Woollard as well as homeowners. Repairing between tenancies keeps void periods short, and it costs much less than replacing.
When to call us in Woollard
Hard water speeds up the wear, and gritty cleaners are the worst culprits.
Typical reasons for a call-out include:
- A peeling or bubbling previous coating
- Staining under the taps and around the waste
- Several chips and rust patches
- Enamel that is lost its shine and feels rough
What to look for in a quote
- How the colour is matched
- What the guarantee covers, and for how long
- Whether cleaning and preparation are in the price
- Whether the price covers travel
Different materials, different repairs
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Exposed steel rusts quickly, so the metal is treated and sealed before the repair.
Acrylic
Acrylic feels warm and is light, but it needs firm support underneath. Repairs to cracks are reinforced from the back.
Prices and what affects them
Prices start from £350. Quotes are free and the price is fixed. What we look at:
- The size and number of damaged areas
- How many items we do on one visit
- The material
- Whether it’s a chip, crack, burn or wear
Our prices are the same across the UK, with no extra for Woollard. The job itself decides the price: the material, the amount of damage and how many items.
Getting a price from pictures
Two or three clear pictures are usually enough. Try to include:
- What it’s made of, if you know
- Details of any past repairs
- Your postcode, so we can check dates
- A coin or ruler next to the damage for scale
You don’t need a survey visit. Nearly every job can be priced from pictures: we need a close-up, a wider picture and your postcode, and we will come back to you with a fixed figure.
About our accreditations · Every repair comes with a one-year guarantee.
