Lincolnshire · England

Non-Slip Bath Coating in Woolsthorpe by Belvoir

Clear non-slip coatings for baths and shower trays for householders, landlords and businesses in Woolsthorpe by Belvoir. Send photos for a free, fixed quote.

  • A bath or tray that is slippery when wet
  • Resurfaced baths that are now too smooth
  • Safety for older or less mobile people
Surface Doctor technician refinishing the outside of a roll-top bath

Need non-slip bath coating in Woolsthorpe by Belvoir?

What we do, step by step

Here’s how a visit generally runs: we arrive at the agreed slot, protect everything around the work area, carry out the work and clear up. Allow a few hours from start to finish. Before leaving, we tell you when it can be used and what to avoid for the first few days.

  1. We clean and degrease the standing area.
  2. We mask out the area to be treated.
  3. We apply the clear textured coating.
  4. We lift the masking for a clean edge.
  5. Once it has cured, normally overnight, it’s ready.

How to prepare

  • Mention any parking restrictions or tricky access
  • Let us know if it has been repaired before
  • Have a window or extractor fan available

Get a quote

Call 0345 017 0787 or use the quote form. With one close-up and one wider picture, we can give you a fixed price.

Get a free quote

Related advice

Non-slip bath coating at your home in Woolsthorpe by Belvoir

It suits older people, families and holiday lets. The coating is clear and textured, so the bath looks much the same. Our technicians work on resurfaced baths, wet room floors (ask us) and acrylic baths, and the jobs we see most are safety for older or less mobile people and a bath or tray that is slippery when wet.

Your repair is guaranteed for a year, as with every job we do. Clean with a soft brush and a mild cleaner. Avoid scourers on the coating.

Location
Woolsthorpe by Belvoir (NG32)
County
Lincolnshire
Guarantee
One year on every repair
Quote
Free and fixed, from your photos
Phone
0345 017 0787
Last updated
23 October 2026
Before and after: an old shower tray refinished by Surface Doctor

Work for landlords and builders

We carry out planned and one-off repairs for housing associations and facilities teams in Lincolnshire and across the UK. Repairing in place avoids the disruption of a replacement, which is easier on the people living there.

Hospitality businesses need rooms back in use quickly, so we keep visits short and tidy. We’ll fit around changeovers where we can.

What we are called out for in Woolsthorpe by Belvoir

Smooth surfaces are easy to clean, yet wet, soapy surfaces are slippery. Textured areas on older baths wear smooth too.

These are the problems we are asked about most:

  • Resurfaced baths that are now too smooth
  • Safety for older or less mobile people
  • Worn-out textured areas
  • Bath mats that harbour mould or get forgotten

What to look for in a quote

  • Whether the price is fixed and includes VAT
  • What happens if they find more damage
  • Who will actually do the work
  • If travel is included in the price

How to compare quotes

Woolsthorpe by Belvoir: your questions answered

Is my repair covered?

Every repair comes with our one-year guarantee. We’ll explain what it covers when we quote.

When can you do it?

We will give you dates with your quote. If it’s urgent, say so and we’ll do what we can.

What information do you need?

Just photos, your postcode and a contact number. On the day, we only need access to the room.

Do I need to be at home?

Someone needs to let us in and show us the job. You do not need to watch us work.

What does non-slip bath coating cost?

Because every job differs, we price from photos. You know the full cost before anything is booked.

Is it messy?

No. The work area is masked and covered, and we take our waste away with us.

Can I add another job to the visit?

Yes, and it’s often cheaper. Just add the extra items to your pictures and we will quote them together.

Can I get a quote without a visit?

Usually, yes. A close-up and a wider photo are enough to give a fixed quote.

When we would advise against a repair

In fairness, some problems need a different fix:

  • Surfaces that are already damaged or peeling (these need repairing first)
  • Textured areas still wet or recently cleaned with oily products
  • Outdoor surfaces

If in doubt, send photos and we will say what we think.

What we work on

  • Resurfaced baths
  • Enamelled baths
  • Wet room floors (ask us)
  • Shower trays
  • Acrylic baths

DIY repairs versus a professional job

A kit can be fine for a tiny mark out of sight. For damage in plain view, cracks, holes or rust, or coloured finishes, it’s worth having it done properly.

If you do try a kit, read the instructions carefully, make sure the area is clean and completely dry, and don’t use it until it has fully cured. If it doesn’t work out, we can still repair it properly.

Repair or replace: which is better?

Instead, you could go for replacing the bath or tray with a textured one, or relying on a mat, which traps water and needs cleaning. A coating treats your existing bath or tray. Our prices are the same across the UK, with no extra for Woolsthorpe by Belvoir. The job itself decides the price: the material, the amount of damage and how many items.

Why us?

  • Fixed prices from your pictures
  • Technicians who travel to you, UK-wide
  • Same prices wherever you are
  • Rooms protected and left tidy

Take a look at our prices page.

Prices and what affects them

There’s no charge for travel to Woolsthorpe by Belvoir. The price comes down to:

  • Any earlier repairs that need removing first
  • The type of damage
  • How hard the colour is to match
  • Where the damage is and how we get to it

We do not add extras on the day. The price we quote from your pictures is the price you pay, unless the damage turns out to be different, in which case we talk to you first.

How to get a fixed price

A couple of clear pictures is all it takes. It helps if you send:

  • Any details about the material
  • Natural light rather than flash
  • Whether it’s been repaired or coated before
  • Where you are, by postcode

Email us a photo of the damage and one of the entire item, and tell us you are in Woolsthorpe by Belvoir, and we will come back with a fixed quote.

About Woolsthorpe by Belvoir

Woolsthorpe by Belvoir is about 5 miles west of Grantham, in Lincolnshire. Whether you’re in the middle of Woolsthorpe by Belvoir or on the outskirts, we offer exactly the same service: fixed prices, tidy work and a one-year guarantee. Woolsthorpe by Belvoir is one of 732 towns and villages in Lincolnshire where we work. Our jobs stretch from Woolsthorpe by Belvoir to Birmingham (56 miles away).

Jobs in NG32 work the same way as everywhere else we cover. Whether you live on Belvoir Lane, Village Street and Rectory Lane or anywhere nearby, we can come to you. We also cover the places around Woolsthorpe by Belvoir: Harston (1 mile south), Belvoir (1 mile west), Knipton (2 miles south-west), Denton (2 miles south-east) and Croxton Kerrial (3 miles south). Within a short drive, we also cover Grantham (5 miles east), Spittlegate (5 miles east), Gonerby Hill Foot (5 miles north-east), Earlesfield (4 miles east), Quarrington (15 miles north-east) and Great Gonerby (5 miles north-east).

Around Woolsthorpe by Belvoir

Around Woolsthorpe by Belvoir, we work in homes near Church of St James, among other places. The closest station to Woolsthorpe by Belvoir is Bottesford station, about 3.6 miles north-west of the centre. Well-known places in the area include Belvoir Castle (1.1 miles west) and Grantham and Kesteven Hospital (5.1 miles east).

Map of Woolsthorpe by Belvoir © OpenStreetMap contributors
CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.