Gloucestershire · England
Non-slip bath & shower coating in Yorkley Slade, Gloucestershire
We travel to Yorkley Slade for clear non-slip coatings for baths and shower trays. Everything is done in place, and the work is guaranteed.
- Safety for older or less mobile people
- Bath mats that harbour mould or get forgotten
- A bath or tray that is slippery when wet
DIY kit or professional repair?
If you’ve already tried a DIY fix, that is fine. We remove the old filler and start again, so it doesn’t stop a professional repair. Just mention it when you send photos, as it can add time.
The difference between a kit and a professional repair is mostly in the preparation and colour. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, and the work is guaranteed.
How we handle non-slip bath coating in Yorkley Slade
It’s a clear, textured coating, so it shows only as a slightly matt area where you stand. It suits older people, families and holiday lets. We work on resurfaced baths, wet room floors (ask us) and acrylic baths, and the jobs we see most are a bath or tray that is slippery when wet and worn-out textured areas.
Big or small, you get the same one-year guarantee. A soft brush and mild cleaner keep it clean. Don’t use abrasive pads on the textured area.
- Where
- Yorkley Slade (GL15)
- County
- Gloucestershire
- Warranty
- A year, on every repair
- Quotes
- Free and fixed, from your photos
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
Towns and villages near Yorkley Slade
Also in Yorkley Slade
Why repair rather than replace?
Instead, you could go for replacing the bath or tray with a textured one, or a bath mat, which traps water and needs cleaning. A coating adds grip to the bath you have. No two jobs are quite the same, so each one is priced on its own. What’s damaged, how badly and how easy it is to reach all play a part, and doing several things on one visit costs less than separate visits.
What you get with us
- Most jobs done in one visit
- Work done at your home or business
- CHAS and Constructionline accredited
- No extra charge for your area
See our prices page.
When a repair isn’t the answer
In fairness, there are a few things a repair will not fix:
- Surfaces that are already damaged or peeling (these need repairing first)
- Textured areas still wet or recently cleaned with oily products
- Outdoor surfaces
Send us photos and we’ll tell you honestly before you book.
Materials we work on in Yorkley Slade
- Resurfaced baths
- Enamelled baths
- Acrylic baths
- Shower trays
- Wet room floors (ask us)
Questions from Yorkley Slade
What happens after I send pictures?
We check the damage, the material and your postcode, then reply with a quote with dates.
Do I have to be there?
Someone needs to let us in and show us the job. You don’t need to watch us work.
Is it worth repairing rather than replacing?
Normally, if the item is otherwise sound. Repairing avoids the cost and disruption of replacing. We’ll tell you honestly if replacement makes more sense.
Which areas do you work in?
All of Gloucestershire, and the rest of the UK. There’s no extra charge for travel.
Can pets and children be at home?
On the day, the room should be kept clear of pets and children, mainly so nothing gets touched before it has cured.
Do the materials smell?
Some materials have a smell while they’re applied. It fades as everything cures.
How do I book?
Use the quote form or ring 0345 017 0787, and we will take it from there.
How quickly can you book me in?
We will give you dates with your quote. Tell us if you need it done quickly.
How we price non-slip bath coating
Prices are worked out job by job. What matters most is:
- What the surface is made of
- How hard the colour is to match
- Whether it’s a chip, crack, burn or wear
- How much damage there is
A few things move the price: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Send photos and you’ll get a fixed figure.
Getting a price from photos
We price nearly every job from pictures. This is what we need:
- A photo taken from further back
- A coin or ruler next to the damage for scale
- Daylight if possible, and no flash reflection
- A close-up of the damage, in focus
Send us a photo of the damage and one of the whole item, and tell us you are in Yorkley Slade, and we will come back with a fixed quote.
The process
It’s a tidy, low-fuss visit. We confirm the time with you beforehand, protect the area, and get on with the job, which usually takes a morning or an afternoon. If anything looks different from your photos, we will talk to you before going ahead.
- First the standing area is cleaned and degreased.
- The area to be treated is masked out.
- We put on the clear non-slip coating.
- We remove the masking for a neat edge.
- We leave it to cure, generally overnight.
Getting ready for the visit
- Clear the area around the damage
- Tell us about any previous repairs or coatings
- Let us know which floor the room is on
Getting a price
There is no need for us to visit first. Nearly every job can be priced from pictures: we need a close-up, a wider picture and your postcode, and we will come back to you with a fixed figure.
Advice
About Yorkley Slade
Yorkley Slade is about 10 miles north of Thornbury, in Gloucestershire. Jobs in Yorkley Slade are booked in like any other job: a fixed quote from pictures, and a technician at your door on the day. Our repair technicians cover all 470 towns and villages in Gloucestershire, from the larger towns to small villages. You can also see our page for Birmingham, about 56 miles away.
Postcode districts we cover here: GL15. You will find streets such as Woodland Place, Harold Road and Tylers Way, all of which we cover. If you are just outside Yorkley Slade, we cover Yorkley (1 mile west), Oldcroft (1 mile south-east), Pillowell (1 mile south-west), Whitecroft (1 mile south-west) and Parkend (2 miles west). We also work in nearby towns such as Gloucester (14 miles north-east), Stroud (12 miles east), Quedgeley (11 miles north-east), Tredworth (13 miles north-east), Kingsway Village (11 miles east) and Cam (8 miles south-east).
Landmarks near Yorkley Slade
Typical jobs here are in homes near Church of All Saints, New Fancy and Yorkley Primary School. Yorkley Slade’s nearest station is Lydney station, roughly 3.4 miles south. Well-known places in the area include Bledisloe Tump (2.6 miles east) and Lydney Park Museum (3.4 miles south). Green spaces nearby include Foxes Bridge Bog.
Work for landlords and builders
Builders, developers and site managers book us for snagging repairs, fixing chips and scratches before handover so nothing needs replacing. We hold CHAS, Constructionline and SafeContractor accreditations.
We regularly price jobs from inventory or check-out photos. You can have a price before you arrange access, and we can arrange access with the tenant directly if that helps.
Do you need non-slip bath coating in Yorkley Slade?
Smooth surfaces are easy to clean, but wet, soapy surfaces are slippery. The textured patch on an older bath also wears down over time.
Common reasons people in Yorkley Slade contact us are:
- Worn-out textured areas
- A bath or tray that is slippery when wet
- Bath mats that harbour mould or get forgotten
- Resurfaced baths that are now too smooth
Comparing quotes
- Who will actually do the work
- How to look after the finish
- What the guarantee covers, and for how long
- Whether they match the colour on site
About our accreditations · Every repair comes with a one-year guarantee.
