North Lincolnshire · England

Bath and surface repairs in DN39

Bath, tray, sink and worktop repairs across DN39, covering Ulceby, Kirmington and Wootton. Free, fixed quotes from your photos and a one-year guarantee.

Need a repair in DN39?

Our bath repair service in DN39

We repair just the damaged spot and colour-match it to the bath, which costs far less than replacing a fitted bath and the tiles around it. You can normally use the bath the next day. We are often asked to fix damage beneath the taps and chips on the rim or sides, in cast iron enamel, pressed steel enamel and roll-top & freestanding.

Expect a friendly, tidy visit. We agree the arrival time in advance, cover and mask the work area, and get on with the job, which normally takes a few hours. If anything looks different from your photos, we’ll talk to you before going ahead.

  1. We protect the bath and the floor around it.
  2. The damaged area is cleaned, keyed and degreased.
  3. We fill it, let it set, then sand it flush.
  4. Colour and gloss are matched to the surrounding surface.
  5. We tidy up and tell you when the bath can be used, generally the day after.

What you will pay

Repairs from £95, with every job priced individually. No two jobs are quite the same, so we price each one individually. What’s damaged, how badly and how easy it is to reach all make a difference, and doing several things on one visit costs less than separate visits.

Why clients in DN39 choose us

  • Colours mixed by hand to suit your surface
  • A year’s guarantee on all work
  • Fixed prices from your photos
  • No extra charge for your area

Ask for a price

There’s no need for us to visit first. Photos are enough for us to price nearly every job: send a close-up, a wider shot and your postcode, and we’ll reply with a fixed price.

Around Ulceby

In Ulceby, that means homes near Church of Saint Nicholas, Ulceby St Nicholas Church of England Primary School and The Brocklesby Ox pub. The nearest railway station is Ulceby station, about 1.1 miles east.

Repairs by material

Pressed steel

Pressed steel is thinner and lighter, with an enamel finish like cast iron. Exposed steel rusts fast, especially around the waste, so early repairs matter.

Acrylic

An acrylic bath is a moulded sheet strengthened from below. There’s no rust, but cracks, holes and scratches happen, and a crack only stays repaired if it’s supported underneath.

When a repair is not the answer

We will always be straight with you, so here’s what a repair will not do:

  • Water coming from the waste or taps rather than the bath
  • Rust that has eaten right through a steel bath
  • Cracks in acrylic we can’t reach from underneath

Should you replace it?

When the bath is otherwise sound, repairing beats replacing. It costs less, takes less time and causes far less upheaval, and the bathroom stays as it is. If the whole surface is worn, re-enamelling may make more sense, and we will tell you.

What your quote should include

  • Whether a trained technician does the job
  • What prep work is covered
  • Whether the colour is mixed to match
  • How changes to the job are handled

What affects the price in DN39

Repairs from £95. You won’t pay by the hour. The price is based on:

  • How much damage there is
  • Whether old repairs or coatings need taking off
  • How hard the colour is to match
  • Where the damage is and how we get to it

A repair generally costs much less than people expect, especially compared with replacing and refitting. Send pictures and we will give you the exact figure.

Getting a price from pictures

When you take your photos, a few simple things make all the difference:

  • Details of any past repairs
  • Daylight if possible, and no flash reflection
  • One picture of the whole bath
  • A coin beside the damage so we can judge size

Call 0345 017 0787 or use the quote form. With one close-up and one wider picture, we can price the job without visiting.

Common problems we fix in DN39

Rust tends to begin where water collects, around the waste, under the taps or in an old chip. Once water reaches the steel or iron, rust spreads under the enamel.

Look out for any of the following:

  • A cracked acrylic bath
  • A hole punched through by something heavy
  • Rust spots around the plughole
  • Chips on the rim or sides

Common questions in DN39

Is there a guarantee?

All our work carries our one-year guarantee. We will explain what it covers when we quote.

Is a bath repair durable?

It should, as long as the bath is firm and the area was prepared well. It carries our one-year guarantee.

Will it make a mess?

No. The work area is masked and covered, and we take our waste away with us.

Is it safe with children and pets around?

We ask you to keep children and pets out of the room while we work and until it has cured. Everywhere else in the home is fine.

I tried a repair kit. Can you fix it?

Yes. We remove the old filler and start again. Mention it when you send pictures.

Do you do work for letting agents?

Yes. We carry out repairs for householders, landlords, letting agents, builders and businesses in DN39.

What does bath repair cost?

Repairs from £95. Every job gets a fixed price from your pictures. Send a close-up and a picture of the entire item with your DN39 postcode.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.