North Lincolnshire · England
Bath chip & crack repair in Ulceby, North Lincolnshire
Fixed-price bath repair in Ulceby and the surrounding area, done in a single visit in most cases and guaranteed for a year.
- Repairs from £95
- A kit repair that didn’t last
- Rusty patches near the plughole
For landlords and businesses
We are used to working with agents and managing companies. Send the address, photos and access details.
For developers and builders, we fix damage before handover. Several plots can be done in one visit to keep costs down.
Bath repair at your home in Ulceby
You do not need a new bath because of a chip. Our technicians fill, shape and refinish the damage, with the colour mixed on site so the repair is hard to spot. If you’re dealing with a chipped rim or side and a cracked acrylic bath, we can generally put it right, on pressed steel enamel, acrylic and roll-top & freestanding alike.
The work is guaranteed for twelve months. If something isn’t right in that time, we come back and put it right.
- Location
- Ulceby (DN39)
- Region
- North Lincolnshire
- Warranty
- A year, on every repair
- Quotes
- From £95. Fixed and free, based on photos
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
Aftercare tips
How the surface is treated afterwards matters. Here’s what we suggest:
- Have new chips seen to early
- Make sure an acrylic bath is firm underfoot
- Put a towel in the bath if you’re working above it
- Store metal items away from the bath
There is nothing special to do after a repair, just sensible cleaning. Avoid bleach-based and gritty cleaners and give it a rinse after each bath.
Tape over a fresh chip or crack until it’s repaired, to keep water out. Take it off before we arrive.
About Ulceby
Ulceby is about 10 miles south of Kingston upon Hull, in North Lincolnshire. Book a date that suits you, and you’ll know when to expect us, so you’re not left waiting in all day. We cover 90 places across North Lincolnshire, from the larger towns to small villages. You can also see our page for Leeds, about 52 miles away.
We work across DN39 and the streets around it. That includes homes on Station Road, Spruce Lane and Front Street. Close by, we cover Ulceby Skitter (1 mile east), Wootton (1 mile north-west), Thornton Curtis (2 miles north-west), South End (4 miles north) and Goxhill (4 miles north). Within a short drive, we also cover Scunthorpe (14 miles west), Barton-upon-Humber (6 miles north-west), Bottesford (15 miles west), Brigg (8 miles south-west), Frodingham (13 miles west) and Crosby (13 miles west).
What’s near Ulceby
We visit homes around Church of Saint Nicholas, Ulceby St Nicholas Church of England Primary School and The Brocklesby Ox pub. The closest station to Ulceby is Ulceby station, roughly 1.1 miles east of the centre.
More services for Ulceby
Prices and what affects them
Repairs from £95. A fixed quote means you know the cost before you book. We take into account:
- The material and finish
- Access to the area
- Whether it’s a chip, crack, burn or wear
- Any earlier repairs that need removing first
There are no surprise extras on the day. The price we quote from your pictures is the price you pay, and if the damage turns out to be different, we discuss it before starting.
Send pictures for a quote
We price nearly every job from photos. This is what we need:
- A picture taken from further back
- Where you are, by postcode
- A clear, close picture of the problem area
- Any earlier repairs or coatings
For most jobs, photos are all we need to give you a price. Add a line about what happened and your postcode, and we’ll send back a fixed quote and some dates.
Should you replace it?
People frequently assume a cracked or chipped bath has to come out. In most cases it does not: a proper repair gives it years more use, without the cost and upheaval of replacing it. Our bath repair starts from £95. The price reflects the work involved, not where you live. You’ll see the full price before booking.
Why us?
- CHAS, Constructionline and SafeContractor accredited
- Usually one visit, start to finish
- Honest advice, even when it means no job
- Rooms protected and left tidy
Take a look at our prices page or resurfacing vs replacement cost guide.
What we cannot put right
A few problems are outside what a surface repair can do:
- Leaking fittings, which need a plumber
- A bath that flexes because its feet or cradle have failed (that needs fixing first)
- Cracks in parts of an acrylic bath we cannot get to from below
Send us photos and we’ll tell you honestly.
Materials we work on in Ulceby
- Roll-top & freestanding
- Cast iron enamel
- Whirlpool & spa baths
- Pressed steel enamel
- Acrylic
What your bath is made of matters
Composite and resin
Composite baths are dense and solid. Chips and scratches can be filled and colour-matched, just like other baths.
Acrylic
Acrylic baths are moulded sheet reinforced underneath. They do not rust, but they can crack, scratch or be holed, and a crack only stays repaired if it’s supported underneath.
What happens on the day
Nothing needs to be moved out of the room. We bring everything we need with us, lay protective sheets and start once you’re happy with the plan. Most jobs take a few hours, and you can get on with other things while we’re there.
- We protect the bath and the floor around it.
- The damaged area is cleaned, keyed and degreased.
- Filler goes in and is sanded flush once it has set.
- Colour and gloss are matched to the surrounding surface.
- We clear up and give you the curing time, normally until the next day.
How to prepare
- Have a window or extractor fan available
- Have somewhere for us to park nearby if possible
- Clear the area around the damage
Get a quote
A quote takes minutes to ask for: take one close-up and one wider shot of the bath, include your postcode and send them over. You will get a fixed quote, not an estimate.
Related advice
FAQs for Ulceby
How do I book?
Photos of the damage, a photo of the entire bath and your postcode. Then we will agree a date.
Can you redo someone else’s repair?
Yes, we frequently do. It can add a little time, which we include in the quote.
Can you quote from photos?
Usually, yes. Clear pictures let us give you a fixed quote without visiting.
Can you repair several things at once?
Yes. Combining jobs on one visit brings the cost down. Send pictures of everything you’d like done.
Do you work for landlords and businesses?
We do, regularly. We quote for multiple addresses and fit around tenancy changeovers.
How much does bath repair cost in Ulceby?
Prices start from £95. Every job gets a fixed quote from your photos. Send a close-up and a photo of the whole item and your postcode.
What happens after I send pictures?
We come back with a fixed quote, generally with dates to choose from. You’re under no obligation.
Do you repair coloured baths?
Yes, we match coloured baths too. We tint the finish to your bath on site.
When to call us in Ulceby
Baths take more knocks than people expect: bottles, shower heads and razors are dropped every day, and fittings press hard against the enamel. Sooner or later, most baths pick up a chip.
People normally call us after spotting something like this:
- Chips caused by builders
- Chips under the taps
- A cracked acrylic bath
- Rust spots around the plughole
What to look for in a quote
- How changes to the job are handled
- Whether the colour is mixed to match
- How long it needs to cure
- Whether cleaning and preparation are in the price
About our accreditations · Every repair comes with a one-year guarantee.
