Argyll and Bute · Scotland

Bath and surface repairs in PA28

Bath, tray, sink and worktop repairs across PA28, from Campbeltown, Askomill and Kilkerran. Free, fixed quotes from your photos and a one-year guarantee.

Surface repairs across PA28

How bath repair works in PA28

Chips, cracks, rust spots and small holes is repaired in place. There is no plumbing to disconnect, your tiles stay as they are, and the repaired area is colour-matched so it blends in. Typical jobs include a kit repair that didn’t last and damage beneath the taps, in roll-top & freestanding, pressed steel enamel and whirlpool & spa baths.

Visits start with a quick look at the job together. Next, we cover and mask everything nearby and we start. You can expect it to take a morning or an afternoon, and we will keep you posted as we go.

  1. First, the area is cleaned and any loose enamel or rust is removed.
  2. The chip or crack is filled, then sanded level with the bath.
  3. We mix the colour on the day to match your bath’s exact shade.
  4. We apply the finish coats and polish the repair so it blends in.
  5. The repair is left to cure, and most baths can be used the day after.

What you’ll pay

Repairs from £95, with every job priced individually. The price depends on how much damage there is and what kind, what it’s made of and how many jobs we combine into one visit. You get a fixed price from your photos, so there are no surprises on the day.

What you get with us

  • No extra charge for your area
  • Every repair guaranteed for a year
  • Nothing taken out or refitted
  • Technicians who travel to you, UK-wide

Ask for a price

Getting a price is easy: take a close-up of the damage and a photo from further back, send them to us with your postcode, and you will get a fixed price back. Quotes are free and no obligation.

Landmarks near Campbeltown

In Campbeltown, that means homes near 40 Main Street pub, Longrow Church and Hall and Campbeltown Library and Museum, among other places. A little further out are Campbeltown Hospital (within half a mile south) and Campbeltown Heritage Centre (under half a mile south). For a walk, there is Black Loch and Beinn Ghuilean.

How the damage happens

Many chips happen while the bathroom is being fitted. Tradespeople drop tools and tiles into the bath, and the damage isn’t always spotted until later. Snagging repairs like these are a regular job for us.

Common reasons people in PA28 contact us include:

  • A failed DIY repair that’s discoloured or lifting
  • Chips along the edge of the bath
  • Hairline or through cracks in acrylic
  • A hole punched through by something heavy

How we price bath repair

Repairs from £95. There is no charge for travel to PA28. The price depends on:

  • The material
  • The size and number of damaged areas
  • The colour and finish to match
  • Whether old repairs or coatings need taking off

Instead of hourly rates, we price the whole job up front. Damage, material and access decide it, and combining items on one visit brings it down.

Send photos for a quote

When you take your photos, these tips help us give you a firm price:

  • Something in shot to show the size
  • Your postcode, so we can check dates
  • The material, if you know it
  • One picture of the entire bath

Getting a quote takes a couple of minutes: take one close-up and one wider shot of the bath, include your postcode and send them over. You will get a fixed quote, not an estimate.

Repairing versus replacing

Replacing a bath rarely stops at the bath: the tiles sitting on the rim tend to break, the panel may not fit the new one, and a plumber has to disconnect and reconnect everything. A repair skips all of it.

What your quote should include

  • Who will actually do the work
  • When it can be used again
  • What happens if they find more damage
  • Whether they match the colour on site

Can I fix it myself?

If you are set on a kit, follow its instructions closely, and don’t use it until it has fully cured. If it fails, we can still put it right.

It’s natural to want to try a repair yourself. The trouble is that kit repairs frequently look fine at first and then fail, and then the old filler has to be removed first.

Repairs by material

Pressed steel

Under the enamel of a steel bath is thin metal. Exposed steel rusts quickly, so we treat and seal the metal before filling.

Cast iron

Cast iron baths are thick and very strong, finished with fired enamel. A chip down to the iron can rust, but the bath itself lasts for generations, so it’s always worth repairing.

Questions from PA28

How soon can you come?

That depends on our diary for your area. We’ll offer you dates when we send your quote.

How long does the repair take to cure?

Normally the next day. We confirm the time before we leave.

Can I add another job to the visit?

Yes. Combining jobs on one visit brings the cost down. Send pictures of everything you’d like done.

Can you match an avocado or pink bath?

Yes, we match coloured baths too. We tint the finish to your bath on site.

Do you work for landlords and businesses?

Yes, often. We quote for multiple addresses and fit around tenancy changeovers.

Is there any odour?

There may be a mild smell during the work.

What happens after I send photos?

You’ll get a fixed quote back, plus dates. There’s no obligation to book.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.