Staffordshire · England

Shower Tray Repair for Acton Gate homes

Shower tray chip, crack and scratch repairs and resurfacing at your home in Acton Gate, with a one-year guarantee on every repair.

  • Repairs from £95
  • Edge chips from dropped bottles
  • Chips or cracks by the plughole
Surface Doctor technician refinishing the outside of a roll-top bath

Shower tray repair near Acton Gate

Shower tray repair in Acton Gate without replacing anything

In most cases, a damaged tray can be repaired where it is, from chipped edges to cracks across the floor of the tray. We match the colour and finish. We work on acrylic, ceramic and enamelled steel, and common reasons people contact us are staining and dullness across the tray and a tray that flexes.

Peace of mind is built in: each job carries a one-year guarantee, and we explain what it covers before you book.

Location
Acton Gate (ST17)
Area hub
Staffordshire
Guarantee
12 months on all our work
Quote
From £95. Free and fixed, from your photos
Call
0345 017 0787
Last updated
23 October 2026
Discoloured square shower tray restored with a new white finish

What your shower tray is made of matters

Ceramic

Ceramic gives a hard, high-gloss surface. Impacts can chip or crack them, and the repair is polished to match the shine.

Enamelled steel

Steel trays have an enamel surface like a steel bath. Exposed metal can rust, so it’s worth repairing early.

Prices and what affects them

Prices start from £95. Every quote is fixed and free. What we take into account:

  • How many areas need work
  • How easy the damage is to reach
  • Unusual colours or finishes
  • Whether it’s a chip, crack, burn or wear

A repair generally costs much less than people expect, especially compared with replacing and refitting. Photos let us give you the exact figure.

Getting a price from photos

Most quotes are done from photos alone. To make it quick:

  • The material, if you know it
  • A photo taken from further back
  • One sharp close-up of the damage
  • A coin beside the damage so we can judge size

Getting a price is easy: take a close-up of the damage and a picture from further back, send them to us with your postcode, and we will reply with a fixed quote. There is no charge for the quote and you are under no obligation.

Should you replace it?

A new tray can be cheap, but fitting it isn’t: taking out the enclosure, tiling and resealing. Repairing it takes one visit. Repairs from £95, with every job priced individually. What it costs depends on the type and amount of damage, what it’s made of and how many items we do on one visit. We give a fixed price from your pictures, so you know the cost before you book.

Why us?

  • One visit for most repairs
  • Technicians who travel to you, UK-wide
  • Dust sheets down, tidy finish
  • Everything repaired in place

Read our full price list.

Acton Gate and nearby

Acton Gate is about 2 miles south of Stafford, in Staffordshire. Whether you are in the middle of Acton Gate or on the outskirts, we offer exactly the same service: fixed prices, tidy work and a one-year guarantee. We work in 512 places in Staffordshire. Our nearest city page is Birmingham, about 23 miles away.

Jobs in ST17 work the same way as everywhere else we cover. If you are just outside Acton Gate, we cover Dunston (1 mile south), Hyde Lea (1 mile north-west), Coppenhall (1 mile west), Little Heath (2 miles south-west) and Billington (3 miles west). Within a short drive, we also cover Cannock (6 miles south-east), Lichfield (13 miles south-east), Longton (15 miles north), Rugeley (7 miles east), Burntwood (10 miles south-east) and Stone (9 miles north).

Local landmarks in Acton Gate

Our customers here include homes close to Stafford Manor High School, St Leonard's CofE (C) First School and St Peter's Church and the streets around them. The nearest railway station is Stafford station, roughly 2.2 miles north of the centre. Further afield, we also cover the area around Stafford Castle (2.4 miles north-west) and The Staffordshire Police Museum (1.6 miles north-east). For a walk, there is Radford Meadows and Tixall Wide.

Map of Acton Gate © OpenStreetMap contributors

When we would advise against a repair

We will always be straight with you, so here’s what a repair can’t fix:

  • A tray that moves underfoot
  • A tray broken in more than one place
  • Leaking waste fittings

Send us pictures and we’ll tell you honestly.

Materials we work on in Acton Gate

  • Stone resin
  • Cast iron
  • Acrylic
  • Ceramic
  • Enamelled steel

For landlords and businesses

Builders, developers and site managers book us for snagging repairs, fixing chips and scratches before handover. We hold CHAS, Constructionline and SafeContractor accreditations.

Rented homes see more wear and tear, and replacing things at every changeover adds up. Repairing between tenants keeps the property presentable for less.

Can I fix it myself?

A DIY attempt is not a disaster. We take the old repair out and do it properly, so it will not stop us repairing it. Just mention it when you send photos, as it can add time.

If you are set on a kit, follow its instructions closely, and don’t use it until it has fully cured. If it fails, we can still put it right.

Acton Gate: your questions answered

Can I add another job to the visit?

Yes, and it’s often cheaper. Just add the extra items to your photos and we’ll quote them together.

Does someone need to be in?

We need someone to let us in. You don’t need to watch us work.

Can I keep using a cracked tray?

It’s best to stop using it until it’s checked, because water may be getting underneath.

Do you reseal the tray as well?

Yes. Add it to your quote and we will do both on one visit.

Can you price it without visiting?

In nearly every case. We only ask to see it in person if the pictures can’t show what we need.

Can you fix a cracked tray?

In most cases. If the tray moves, the support needs fixing first.

What happens if you find more damage?

Your quote covers the damage in the photos. If there’s more, we will tell you before starting.

How long does it take to cure?

Normally by the following day. We will confirm before we leave.

What we do, step by step

On the day, we arrive at the time we have agreed, cover the area with dust sheets and masking, and set to work. The job typically takes a few hours, or most of a day for a full resurface. We tidy up before we leave and let you know when you can use it again.

  1. We check the tray for movement first.
  2. The damaged area is cleaned and opened up.
  3. Cracks are reinforced and the damage filled.
  4. We shape the repair, match the colour and finish it.
  5. It’s left to cure, generally until the next day.

Preparing for the visit

  • Point us to the nearest place to park
  • Make sure the area is dry
  • Mention if the room is upstairs or in a flat

Get a quote

You don’t need a survey visit. Nearly every job can be priced from photos: we need a close-up, a wider picture and your postcode, and we’ll come back to you with a fixed figure.

Send pictures for a quote

Related advice

Looking after it afterwards

Good habits make a big difference to how long a repair lasts. Here’s what we suggest:

  • Keep harsh chemicals off the tray
  • Don’t stand heavy bottles on the tray
  • Ventilate the room after showers
  • Use a mild, non-abrasive cleaner

Keep scourers and harsh chemicals off the tray. Warm water and a mild detergent is enough.

Every shower forces a little water into a crack, which can damage the floor over time. An early repair is far cheaper than floor repairs.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.