Devon · England
Shower tray repair & resurfacing in Ash Mill, Devon
Shower tray repair in Ash Mill without the cost of replacing. Get a fixed quote from your photos, then book a visit.
- Repairs from £95
- Cracks running from the waste
- Chips on the edges
How we handle shower tray repair in Ash Mill
We repair a lot of shower trays. Chips by the waste, cracks across the base and dull, stained surfaces can all be put right without removing the tray. If you are dealing with a tray that looks tired however much you clean it and chips or cracks by the plughole, we can help, whatever the material.
A one-year guarantee comes with the work, just as it does everywhere we cover.
- Location
- Ash Mill (EX36)
- County
- Devon
- Warranty
- One year on every repair
- Quote
- From £95. Fixed and free, based on photos
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
Looking after it afterwards
Looking after the surface is easy:
- Get a moving tray checked
- Keep the bathroom well ventilated
- Rinse away soap after showering
- Stick to gentle cleaners
Keep scourers and harsh chemicals off the tray. A soft cloth and washing-up liquid do the job.
Stop using the shower if the tray is cracked. Water may be getting under the tray, where it causes damage you can’t see.
Prices and what affects them
Prices start from £95. There are no hourly rates or hidden extras. The price is based on:
- The material
- Unusual colours or finishes
- What kind of damage it is
- How much damage there is
Every job is a little different, so each one is priced on its own. What’s damaged, how badly and how easy it is to reach all make a difference, and doing several things on one visit costs less than separate visits.
Getting a price from photos
When you take your pictures, these tips help us give you a firm price:
- A picture taken from further back
- Where you are, by postcode
- A close-up of the damage, in focus
- What it’s made of, if you know
For a price in Ash Mill, the easiest route is photos: a close-up, a wider shot and your postcode. You’ll get a fixed quote with dates to choose from.
About Ash Mill
Ash Mill is about 12 miles north-west of Tiverton, in Devon. We work in every kind of home, old or new, large or small, as well as offices, shops and holiday lets. We cover all 586 towns and villages in Devon, from the larger towns to small villages.
All of EX36 is within our area, from the main roads to the quietest streets. If you are just outside Ash Mill, we cover Bishop's Nympton (2 miles north-west), Newtown (2 miles north-west), Meshaw (3 miles south-west), Knowstone (3 miles east) and Molland (4 miles north). We also work in nearby towns such as Barnstaple (15 miles north-west), Tiverton (12 miles south-east), Crediton (14 miles south), Newport (15 miles west), South Molton (5 miles west) and North Tawton (15 miles south-west).
Landmarks near Ash Mill
Typical jobs here are in homes near Church of St Peter. Well-known places in the area include South Molton Hospital (5.1 miles west). For a walk, there’s Rackenford and Knowstone Moors.
Signs you need shower tray repair in Ash Mill
Heavy bottles, shower heads and dropped razors chip trays, typically on the edges or near the plughole.
Signs it’s time to call us include:
- Cracks running from the waste
- Scuffs and light scratches
- Chips caused during fitting
- Damage around the waste
What your quote should include
- How your room will be protected
- Is the price fixed, and does it include VAT?
- What happens if they find more damage
- Who turns up on the day
Your questions about shower tray repair in Ash Mill
Are there extra charges for Ash Mill?
Travel is included in the price, and we charge the same wherever you are.
Can a stained tray be refinished?
Yes, it’s a common job. Resurfacing gives a worn tray an even, clean finish.
Is the work guaranteed?
All our work carries a one-year guarantee. We will explain what it covers when we quote.
Can you quote from photos?
Nearly always. If photos don’t show enough, we’ll ask for another angle.
Is it safe with children and pets around?
Please keep children and pets out of the room during the visit. Everywhere else in the home is fine.
Are you accredited?
Yes, including CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.
Which areas do you work in?
We cover the entire UK, including Ash Mill and the rest of Devon. Just include your postcode and we will offer you dates.
How do I get a price for shower tray repair in Ash Mill?
Prices start from £95. We give a fixed quote based on pictures of the damage. Send a close-up and a photo of the entire item with your EX36 postcode.
The process
When we visit, the technician arrives at the agreed time, protects the room with dust sheets and masking and gets started. The job normally takes a few hours, or most of a day for a full resurface. We clean up when we’re done and let you know when you can use it again.
- We make sure the tray does not flex and look for the cause of any crack.
- The damaged area, or the whole tray, is cleaned and prepared.
- Chips and cracks are filled, reinforced and sanded level.
- The repair is colour matched, or the whole tray gets a new finish.
- Once cured, typically by the day after, you can use the shower.
Before we arrive
- Keep a parking space free if you can
- Let the surface dry out before the visit
- Have a window or extractor fan available
Ask for a price
You don’t need a survey visit. Photos are enough for us to price nearly every job: we need a close-up, a wider picture and your postcode, and we will reply with a fixed quote.
Related advice
What we cannot put right
A few problems are outside what a surface repair can do:
- Movement caused by a poor base, until the support is fixed
- Water damage to the floor beneath the tray
- Trays cracked in several places
Send us photos and we will tell you honestly.
Materials we work on in Ash Mill
- Acrylic
- Ceramic
- Stone resin
- Enamelled steel
- Cast iron
Should I try a DIY kit first?
The difference between a kit and a professional repair is mostly in the preparation and colour. We prepare the area properly, mix the colour on site and polish the finish to match, and the work is guaranteed.
If you’re set on a kit, follow its instructions closely, and don’t use it until it has fully cured. If it fails, we can still put it right.
Different materials, different repairs
Ceramic
Ceramic trays are hard and glossy. They chip and crack from impact, and we match the gloss when we repair them.
Acrylic
Acrylic feels warm and is light, but it needs firm support underneath. Repairs to cracks are reinforced from the back.
More services for Ash Mill
Work for landlords and builders
Rented homes see more wear and tear, and replacing things at every changeover adds up. Repairing between tenants keeps the property presentable for less.
Hospitality businesses need rooms back in use quickly, so most of our work is done in a single visit. We’ll fit around changeovers where we can.
About our accreditations · Every repair comes with a one-year guarantee.
