Hampshire · England
Shower Tray Repair in Balmerlawn
Shower tray repair for Balmerlawn, without a refit. Get a fixed price from your photos, then we come to you.
- Repairs from £95
- A damaged area around the waste
- A crack across the base
About our shower tray repair in Balmerlawn
Stone resin, acrylic and ceramic trays can all be repaired, and worn trays can be resurfaced completely. Nothing is taken out, so the screen and tiling stay as they are. Whether it’s edge chips from dropped bottles and snagging damage in a new bathroom, we can normally put it right, whatever the material.
You are covered for a year from the day of the repair. Just call us if there’s a problem and we’ll sort it.
- Location
- Balmerlawn (SO42)
- County
- Hampshire
- Warranty
- A year, on every repair
- Quote
- From £95. Fixed and free, based on pictures
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
Should I try a DIY kit first?
DIY kits are sold for most surfaces, and they can tidy up a tiny mark. The trouble is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler often lifts.
The difference between a kit and a professional repair is mostly in the preparation and colour. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, and the work is guaranteed.
Towns and villages near Balmerlawn
What else we do in Balmerlawn
Keeping it looking good
Good habits make a big difference to how long a repair lasts. Here’s what we suggest:
- Rinse the tray after each shower
- Replace failing sealant promptly
- Keep heavy bottles on a shelf
- Ventilate the room after showers
Rinse the tray after use, clean with mild cleaners, and keep the sealant in good condition so water can’t get underneath.
Failed sealant around a tray should be replaced quickly. It lets water behind the tray and can damage the floor below.
What a repair can’t fix
To be straight with you, some problems need a different fix:
- Leaking waste fittings
- A tray that flexes because it was never properly supported
- Rotten or damaged flooring underneath
Not sure? Send pictures and we will give you a straight answer before booking.
Surfaces we repair
- Enamelled steel
- Ceramic
- Cast iron
- Stone resin
- Acrylic
About Balmerlawn
Balmerlawn is about 5 miles north of Lymington, in Hampshire. We work in every kind of home, old or new, large or small, as well as offices, shops and holiday lets. We work in all 683 towns and villages in Hampshire, from the larger towns to small villages. We work right across the region, from Balmerlawn to London (79 miles away).
Jobs in SO42 work the same way as everywhere else we cover. We also travel to Brockenhurst (1 mile south-west), Setley (1 mile south), South Weirs (2 miles south-west), Lyndhurst (3 miles north) and Emery Down (3 miles north). Within a short drive, we also cover Eastleigh (14 miles north-east), Totton (7 miles north), Chandler's Ford (13 miles north-east), Hedge End (13 miles north-east), Lymington (5 miles south) and Romsey (12 miles north).
What’s near Balmerlawn
Our customers here include homes close to Church of St Nicholas, Rose And Crown Hotel and Brockenhurst Church of England Primary School and the streets around them. For rail, the closest station is Brockenhurst station, about 0.9 miles south-west of the centre. Well-known places in the area include Lymington New Forest Hospital (4 miles south).
How the visit works
When we visit, we arrive at the time we have agreed, cover the area with dust sheets and masking, and set to work. The job normally takes a few hours, or most of a day for a full resurface. We tidy up before we leave and let you know when you can use it again.
- First we check the tray is solid and work out why any crack happened.
- We clean and prepare the damaged area or the entire tray.
- We fill and strengthen any chips or cracks and sand them smooth.
- The repair is colour matched, or the whole tray gets a new finish.
- Once cured, generally by the next day, you can use the shower.
Before we arrive
- Let the surface dry out before the visit
- Have somewhere for us to park nearby if possible
- Let us know about parking or access
Ask for a price
For most jobs, pictures are all we need to give you a price. Tell us what happened and where you are, and we will reply with a fixed quote and the earliest dates we have.
Advice
When to call us in Balmerlawn
The waste is a common starting point for cracks, because that is where the tray is weakest and the fitting puts pressure on it.
Common reasons people in Balmerlawn contact us include:
- Chips caused during fitting
- Edge chips from dropped bottles
- A damaged area around the waste
- Scuffs and light scratches
What to look for in a quote
- If travel is included in the price
- What preparation is included
- Is the price fixed, and does it include VAT?
- How changes to the job are handled
Repairing versus replacing in Balmerlawn
Trays sit under the screen and tiles, so taking one out disturbs a lot. Repairing it avoids that disruption. Our shower tray repair starts from £95. Set against the cost of replacement, repairing generally costs far less, because there is no removal, plumbing or making good. Your fixed quote shows exactly what’s included.
Why book with us
- Rooms protected and left tidy
- Technicians who travel to you, UK-wide
- One price list for the entire UK
- No need to remove anything
Read our pricing.
Prices and what affects them
Prices start from £95. We charge the same across the UK, including Balmerlawn. The price reflects:
- What kind of damage it is
- Doing more than one item at once
- The colour and finish to match
- The size and number of damaged areas
A repair is priced on what needs doing, not where you live. You’ll see the full price before booking.
Getting a price from pictures
You can normally get a fixed quote without us visiting. To make it quick:
- Details of any past repairs
- The postcode, so we can plan the visit
- A coin beside the damage so we can judge size
- A wider photo showing the whole shower tray
Send us a picture of the damage and a wider shot of the whole item, with your SO42 postcode, and we will come back with a fixed quote.
Balmerlawn: your questions answered
Are there extra charges for Balmerlawn?
No. Our quotes include travel, with the same prices everywhere we work.
I’m a tenant. Can you help?
We are happy to deal with the tenant, landlord or agent. Get your landlord’s agreement first.
Will there be a smell?
A little, depending on the job. Ventilation keeps it to a minimum, and it soon fades.
Do you come to Balmerlawn?
We do. We send a technician to Balmerlawn for every job, and the price is the same as everywhere else.
Can you price it without visiting?
In nearly every case. If photos don’t show enough, we will ask for another angle.
Do you work for landlords and businesses?
Yes, often. We can quote for several properties together and work between tenancies.
Can you replace the silicone at the same time?
Yes, if you’d like us to. It’s a good time to replace old sealant.
What happens once I’ve sent pictures?
We review the pictures and send a fixed quote.
Different materials, different repairs
Enamelled steel
Steel trays have an enamel surface like a steel bath. Exposed metal can rust, so it’s worth repairing early.
Ceramic
Ceramic gives a hard, high-gloss surface. Impacts can chip or crack them, and we match the gloss when we repair them.
About our accreditations · Every repair comes with a one-year guarantee.
