Hampshire · England
Bath Repair in Balmerlawn
Chip and crack repairs to enamel, acrylic and cast iron baths for homes and businesses in Balmerlawn and across Hampshire. Send photos for a free, fixed quote.
- Repairs from £95
- Deep scratches in acrylic
- Holes from dropped items
Bath repair at your home in Balmerlawn
It pays to repair bath damage while it’s small. Exposed metal on enamelled baths soon rusts, and on acrylic, a crack keeps spreading while the bath flexes. Repairing it stops the damage getting worse. We regularly repair cast iron enamel, pressed steel enamel and roll-top & freestanding, and the jobs we see most are chips along the edge of the bath and holes from dropped items.
Whatever the size of the job, it’s backed by a one-year guarantee.
- Location
- Balmerlawn (SO42)
- County
- Hampshire
- Guarantee
- A year, on every repair
- Price
- From £95. Fixed and free, based on pictures
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
Covering Balmerlawn
Balmerlawn is about 5 miles north of Lymington, in Hampshire. Our work suits any type of property, old or new, large or small, plus businesses and rented homes. We cover all 683 towns and villages across Hampshire. We work right across the region, from Balmerlawn to London (79 miles away).
Our visits in SO42 are booked in the same way as anywhere else. Neighbouring places we cover include Brockenhurst (1 mile south-west), Setley (1 mile south), South Weirs (2 miles south-west), Lyndhurst (3 miles north) and Emery Down (3 miles north). Larger places within reach include Eastleigh (14 miles north-east), Totton (7 miles north), Chandler's Ford (13 miles north-east), Hedge End (13 miles north-east), Lymington (5 miles south) and Romsey (12 miles north).
Local landmarks in Balmerlawn
Typical jobs here are in homes near Church of St Nicholas, Rose And Crown Hotel and Brockenhurst Church of England Primary School. Balmerlawn’s nearest station is Brockenhurst station, about 0.9 miles south-west. Further afield, we also cover the area around Lymington New Forest Hospital (4 miles south).
Why repair rather than replace?
Replacing a bath rarely stops at the bath: the tiles sitting on the rim tend to break, the panel may not fit the new one, and the plumbing has to be disconnected and refitted. Repairing the damage avoids all of that. Our bath repair starts from £95. The price depends on the type and amount of damage, the material and how many items we do on one visit. We give a fixed quote from your photos, so there are no surprises on the day.
Why choose Surface Doctor in Balmerlawn
- We come to you, anywhere in the UK
- Accredited with CHAS, Constructionline and SafeContractor
- Nothing taken out or refitted
- Most jobs done in one visit
Read our full price list and guide to resurfacing and replacement costs.
What we are called out for in Balmerlawn
Acrylic baths that crack nearly always have a support problem. Loose legs, no proper cradle or a floor that gives let the bath move until it cracks.
Most people contact us when they notice one of these:
- Rust spots around the plughole
- A chipped rim or side
- A kit repair that didn’t last
- Scuffs and scratches in the surface
Questions to ask before you book
- Whether the price covers travel
- Whether cleaning and preparation are in the price
- Whether the price is fixed and includes VAT
- Whether they match the colour on site
Balmerlawn questions
Do you come to Balmerlawn?
Yes, we do. We send a technician to Balmerlawn for every job, and the price is the same as everywhere else.
When can you do it?
It depends on the time of year and where you are. Send pictures with your postcode and we will reply with the earliest dates.
Do you do work for letting agents?
Yes, frequently. We quote for multiple addresses and fit around tenancy changeovers.
Can tenants book a repair?
Of course. Check with your landlord; we can send the quote to them too.
Can you repair something that is been repaired before?
Yes, we frequently do. Removing the old work can add time, and that is in the quote.
Will there be a smell?
A little, depending on the job. Open windows and an extractor fan help.
Can a cracked acrylic bath be fixed?
Normally, yes, as long as we can get to the back of the crack to support it. Check under the bath panel, or send us a photo.
Will it make a mess?
No. The work area is masked and covered, and we take our waste away with us.
Work for landlords and builders
Letting agents often send us photos straight from the inventory. You can have a price before you arrange access, and we can arrange access with the tenant directly if that helps.
Rented homes see more wear and tear, and replacing things at every changeover adds up. Repairing between tenants keeps the property presentable for less.
Looking after it afterwards
A little care keeps the finish looking good. We recommend:
- Avoid scourers, wire wool and gritty cream cleaners
- Ensure an acrylic bath is firm underfoot
- Have new chips seen to early
- Protect the bath with a towel when doing jobs nearby
Look after the repair the same way as the bath: warm water, washing-up liquid and a soft cloth. Avoid scourers and gritty cream cleaners.
A chip on a metal bath shouldn’t be left. Water gets to the metal and rust starts, and a rust spot is a bigger repair than a clean chip.
What your bath is made of matters
Cast iron
Cast iron baths are thick and very strong, finished with fired enamel. Chips can rust if left, but the bath itself lasts for generations, which makes it well worth repairing.
Composite and resin
Stone resin and composite baths are heavy and solid. Chips and scratches can be filled and colour matched, in much the same way.
Nearby places to Balmerlawn
Other services in Balmerlawn
Can I fix it myself?
If you do try a kit, read the instructions carefully, ensure the area is clean and completely dry, and give it the full curing time. If it doesn’t work out, we can still repair it properly.
What a professional repair adds is preparation, colour matching and finishing. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, and the work is guaranteed.
How we price bath repair
Prices start from £95. A fixed quote means you know the cost before booking. We take into account:
- Where the damage is and how we get to it
- Doing more than one item at once
- What kind of damage it is
- What the surface is made of
A repair is priced on what needs doing, not where you live. You will see the full price before booking.
Quotes from your pictures
It only takes a minute to photograph the damage. Please include:
- A close-up of the damage, in focus
- Your postcode, so we can check dates
- One picture of the whole bath
- Any details about the material
The quickest way to a price is to send a couple of pictures using our quote form or call us. We’ll tell you honestly whether it can be repaired.
How the visit works
We turn up at the time we agreed with you and looks over the damage before anything else. Dust sheets and masking tape go down before we open a single tin. Most visits take a few hours, and we leave the room as we found it.
- We clean the area and remove any loose enamel or rust.
- Next we fill the damage and sand it smooth and level.
- We mix the colour on the day to match your bath’s exact shade.
- We apply the finish coats and polish the repair so it blends in.
- The repair is left to cure, and most baths can be used the following day.
Getting ready for the visit
- Have a window or extractor fan available
- Keep children and pets away from the room on the day
- Mention if the room is upstairs or in a flat
Get a quote
Pricing is simple: take a close-up of the damage and a picture from further back, send them to us with your postcode, and you will get a fixed price back. Quotes are free and no obligation.
Advice
About our accreditations · Every repair comes with a one-year guarantee.
