North Yorkshire · England
Shower Tray Repair in Bellerby
Shower tray repair in Bellerby without the cost of replacing. Get a fixed quote from your pictures, then book a visit.
- Repairs from £95
- Movement when you stand on it
- A damaged area around the waste
Should you replace it?
A new shower tray often means a new enclosure fitting, new tiling and new sealant. A repair leaves all of that untouched and costs far less. Repairs from £95, with every job priced individually. The price reflects the work involved, not your postcode. The full price is agreed before booking.
Why choose Surface Doctor in Bellerby
- Colours mixed by hand to suit your surface
- We leave the room as we found it
- A year’s guarantee on all work
- We come to you, anywhere in the UK
Take a look at our full price list.
Shower tray repair in Bellerby without replacing anything
Stone resin, acrylic and ceramic trays can all be repaired, or resurface the whole tray if it’s worn. The tray stays in place, so the enclosure and tiles aren’t disturbed. Typical jobs include a dull, stained or worn surface and chips or cracks by the plughole, across enamelled steel, stone resin and cast iron.
You’re covered for a year from the day of the repair. Just call us if there’s a problem and we will sort it.
- Where
- Bellerby (DL8)
- Area hub
- North Yorkshire
- Cover
- One year on every repair
- Price
- From £95. Free, fixed quote from pictures
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
Also in Bellerby
Can I fix it myself?
We understand the appeal of fixing it yourself. The trouble is that kit repairs frequently look fine at first and then fail, and the old filler has to come out before a proper repair.
You can buy a DIY kit for most repairs, and they can make a small mark look better. The trouble is colour and preparation: they come in a handful of shades, and if the surface is not prepared the repair will not last.
How we price shower tray repair
Repairs from £95. We give every job a fixed quote from pictures. These are the things that affect it:
- The colour and finish to match
- Whether we combine several jobs
- Whether it’s a chip, crack, burn or wear
- What the surface is made of
Every job is a little different, so each one is priced on its own. The size and type of damage, the material and access all make a difference, and combining jobs on one visit brings the cost down.
Getting a price from photos
You can take the photos on your phone. Make sure they show:
- Any earlier repairs or coatings
- One sharp close-up of the damage
- Any details about the material
- A coin beside the damage so we can judge size
Email us a photo of the damage and a wider shot of the entire item, with your DL8 postcode, and we will come back with a fixed quote.
How the visit works
Once we’re through the door, we keep the work contained to the one room. We mask off everything nearby, the job takes a few hours for a repair, longer for a full resurface, depending on what we find, and we finish with a tidy-up and a look at the finished work together.
- First, we check whether the tray moves.
- The damaged area is cleaned and opened up.
- We reinforce any crack and fill the damage.
- We shape the repair, match the colour and finish it.
- It’s left to cure, typically until the following day.
How to prepare
- Tell us about parking, stairs or access
- Keep a parking space free if you can
- Clear the area around the damage
Getting a price
Most clients in Bellerby get their price from photos. Add a line about what happened and your postcode, and we will reply with a fixed quote and the earliest dates we have.
Read more
Common problems we fix in Bellerby
Cracks frequently start at the waste, where the tray is cut and the fitting is tightened.
Look out for any of the following:
- Scratches in the surface
- A cracked shower tray
- Chips caused during fitting
- Edge chips from dropped bottles
What to look for in a quote
- How long the guarantee is and what it covers
- Who will actually do the work
- How changes to the job are handled
- Whether the price is fixed and includes VAT
Looking after it afterwards
Once the work has cured, treat it gently:
- Don’t use strong acids or bleach
- Keep the bathroom well ventilated
- Stick to gentle cleaners
- Replace failing sealant promptly
Check the silicone around the tray every few months, and replace it when it splits or goes black.
If the tray creaks or moves, get it checked, before it cracks or gets worse.
About Bellerby
Bellerby is about 6 miles south-west of Catterick Garrison, in North Yorkshire. Whether you are in the middle of Bellerby or on the outskirts, the service is the same: a fixed quote, a tidy visit and a guarantee. Bellerby is one of 626 places in North Yorkshire we cover. We work right across the region, from Bellerby to Leeds (about 38 miles away).
Jobs in DL8 are booked in the same way as anywhere else. Whether you live on Runs Bank, Mill Lane and Studdah Close or anywhere nearby, a technician can come to you. We also cover the places around Bellerby: Leyburn (1 mile south), Harmby (2 miles south), Wensley (3 miles south-west), Spennithorne (3 miles south-east) and Preston-under-Scar (3 miles west). Within a short drive, we also cover Catterick Garrison (6 miles north-east), Richmond (6 miles north-east), Colburn (6 miles north-east), Bedale (10 miles east), Romanby (15 miles east) and Aiskew (10 miles east).
Around Bellerby
Our customers here include homes close to Cross Keys pub, Church of St John and The Wensleydale School. Further afield, we also cover the area around Middleham Castle (3.3 miles south) and Duchess of Kent Military Hospital (5.4 miles north-east). Open spaces near Bellerby include Leyburn Old Glebe.
What a repair can’t fix
In fairness, there are a few things a repair will not fix:
- A tray that flexes because it was never properly supported
- Trays cracked in several places
- Leaks from the waste or pipework (a plumber’s job)
Not sure? Send photos and we will give you a straight answer.
Surfaces we repair
- Cast iron
- Ceramic
- Acrylic
- Stone resin
- Enamelled steel
Bellerby questions
Do you work for landlords and businesses?
Yes. We work for landlords, agents, builders and businesses as well as homeowners in Bellerby.
Do I have to be there?
Yes. We need access to the room while we work, at a time we agree with you.
Can a stained tray be refinished?
Yes. We can resurface the whole tray for a fresh finish without removing it.
Are you a vetted contractor?
We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.
Is a cracked tray repairable?
Generally, as long as it does not flex. The crack is reinforced, filled and refinished.
Do you redo the sealant?
We can. After a repair is a good time to reseal.
Can you redo someone else’s repair?
Yes, regularly. It can add a little time, which we include in the quote.
Do you come to Bellerby?
Yes. We cover the entire UK and travel to Bellerby and the rest of North Yorkshire. Send pictures and we will quote, or call 0345 017 0787.
Work for landlords and builders
If you manage property in Bellerby, we’ll quote for several properties at once. Send pictures for each one and we’ll come back with a combined price.
Builders, developers and site managers book us for snagging repairs, putting right damage done during fitting so nothing needs replacing. We’re CHAS, Constructionline and SafeContractor accredited.
About our accreditations · Every repair comes with a one-year guarantee.
