Kent · England

Shower Tray Repair for Beltinge homes

Local shower tray repair for Beltinge: a fixed quote from photos, a tidy visit and a one-year guarantee.

  • Repairs from £95
  • Chipped corners or rims
  • Chips or cracks by the plughole
Surface Doctor technician refinishing the outside of a roll-top bath

Book shower tray repair in Beltinge

Shower tray repair at your home in Beltinge

Most tray damage can be repaired in place, from a chip by the waste to a crack across the base. The colour and finish are matched so the repair blends in. We regularly repair ceramic, acrylic and cast iron, and people most frequently call us about damage from a refit or building work and a cracked shower tray.

You’re covered for a year from the day of the repair. Just call us if there is a problem and we’ll come back.

Before and after: an old shower tray refinished by Surface Doctor
Area
Beltinge (CT6)
Area hub
Kent
Cover
A year, on every repair
Price
From £95. Fixed and free, based on pictures
Phone
0345 017 0787
Last updated
23 October 2026

What we are called out for in Beltinge

Trays crack mainly because they move: if a tray wasn’t bedded on a solid, even base, every shower puts strain on it. Dropped bottles cause most chips.

Common reasons people in Beltinge contact us are:

  • Edge chips from dropped bottles
  • Damage around the waste
  • Damage from a refit or building work
  • A tray that looks tired however much you clean it

Questions to ask before you book

  • Whether the price covers travel
  • How soon you can use it again
  • How the room is protected while they work
  • What the guarantee covers, and for how long

Choosing a repair company

Materials and what they mean for the repair

Enamelled steel

Steel trays have an enamel surface like a steel bath. Chips can rust if they’re left, so early repairs help.

Acrylic

Acrylic is light and warm to the touch, but it needs firm support underneath. Cracks are strengthened from behind before the front is finished.

About Beltinge

Beltinge is about 1 mile east of Herne Bay, in Kent. Our work suits any type of property, from flats and terraces to detached houses and new builds, as well as offices, shops and holiday lets. Beltinge is one of 922 towns and villages in Kent where we work. Our jobs stretch from Beltinge to London (about 55 miles away).

Our repair technicians cover all of the CT6 postcode area and the streets around it. We regularly work on streets such as Manor Road, Puffin Road and Cliff Avenue and the roads around them. We also travel to Bishopstone (1 mile east), Hillborough (1 mile south-east), Hawthorn (1 mile south-east), Broomfield (1 mile south) and Herne Bay (1 mile west). Further out, we also cover Canterbury (7 miles south-west), Margate (10 miles east), Ramsgate (11 miles east), Broadstairs (12 miles east), Whitstable (6 miles west) and Deal (15 miles south-east).

Local landmarks in Beltinge

We visit homes around Bishopstone Cliffs, Reculver Church of England Primary School and Herne Bay High School. For rail, the closest station is Herne Bay station, about 1.9 miles west. Well-known places in the area include Whitstable and Tankerton Hospital (4.8 miles west). Green spaces nearby include West Blean and Thornden Woods.

Map of Beltinge © OpenStreetMap contributors

Repair or replace: which is better?

Replacing a tray typically means refitting the screen, retiling and resealing. Repairing it avoids all of that, at a fraction of the cost. Prices start from £95. The price reflects the work involved, not your postcode. The full price is agreed before booking.

Why us?

  • Colours mixed by hand to suit your surface
  • Work done at your home or business
  • Same prices wherever you are
  • Dust sheets down, tidy finish

Take a look at our full price list.

What affects the price in Beltinge

Prices start from £95. Prices are worked out job by job. The main factors are:

  • Unusual colours or finishes
  • The type of damage
  • How many items we do on one visit
  • The material

Every job is a little different, so each one is priced on its own. What’s damaged, how badly and how easy it is to reach all play a part, and doing several things on one visit costs less than separate visits.

How to get a fixed quote

You can usually get a fixed quote without us visiting. To help us price it:

  • A coin beside the damage so we can judge size
  • Any details about the material
  • Any earlier repairs or coatings
  • Good light, ideally daylight, without flash glare

You do not need a survey visit. Nearly every job can be priced from pictures: send a close-up, a wider shot and your postcode, and we will come back to you with a fixed figure.

Keeping it looking good

Aftercare is simple, and it makes a real difference:

  • Ventilate the room after showers
  • Stick to gentle cleaners
  • Do not use strong acids or bleach
  • Do not ignore a tray that flexes

Avoid abrasive pads and strong descalers. A soft cloth and washing-up liquid do the job.

Act on split sealant early. Water gets behind and under the tray and can damage the floor below.

How the visit works

We agree an arrival time beforehand, so you’re not left guessing. Once we are there, the work takes a few hours, or most of a day for a full resurface in most cases. We leave the room clean.

  1. First, we check whether the tray moves.
  2. The damaged area is cleaned and opened up.
  3. Cracks are reinforced and the damage filled.
  4. The repair is shaped, colour matched and finished.
  5. It’s left to cure, normally until the day after.

Getting ready for the visit

  • Tell us about parking, stairs or access
  • Keep children and pets away from the room on the day
  • Let us know if it has been repaired before

Ask for a price

Call 0345 017 0787 or use the quote form. With one close-up and one wider picture, we can give you a fixed price.

Get a fixed price

Related advice

Questions from Beltinge

Do you cover the entire of Kent?

Across the UK, and that includes Beltinge. Prices don’t change with location.

Are there extra charges for Beltinge?

Travel is included in the price, and we charge the same wherever you are.

Do you redo the sealant?

We can. After a repair is a good time to reseal.

Is it messy?

Very little mess: we sheet and mask everything nearby, and we leave the room clean.

Can landlords book you?

Yes, often. We can quote for several properties together and work between tenancies.

How do I get a price for shower tray repair in Beltinge?

Repairs from £95. Every job gets a fixed price from your photos. Send a close-up and a picture of the whole item and your postcode.

Do you work in Beltinge?

Yes, we do. We send a technician to Beltinge for every job, with no extra charge for travel.

Is the work guaranteed?

All our work carries a one-year guarantee. We’ll explain what it covers when we quote.

Work for landlords and builders

We carry out planned and one-off repairs for housing associations and facilities teams. Repairing in place avoids the disruption of a replacement, which matters when someone is living in the home.

We’re used to working with agents and managing companies. Send the address, photos and access details and we’ll arrange it.

What we can’t put right

It helps to know what we can’t do:

  • Multiple cracks across the tray
  • Water damage to the floor beneath the tray
  • A tray that flexes because it was never properly supported

Not sure? Send photos and we will give you a straight answer.

Surfaces we repair

  • Stone resin
  • Acrylic
  • Enamelled steel
  • Ceramic
  • Cast iron
CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.