Norfolk · England

Shower tray repair & resurfacing in Belton, Norfolk

Problem with your shower tray in Belton? We put it right where it is, mix the colour on the day and back it with a one-year guarantee.

  • Repairs from £95
  • Chips caused during fitting
  • Chipped corners or rims
Surface Doctor technician refinishing the outside of a roll-top bath

Shower tray repair for Belton homes

Do you need shower tray repair in Belton?

Trays fitted on timber floors can crack if the floor moves, especially if the tray wasn’t bedded properly. On solid floors, cracks generally point to an uneven base.

Get in touch if you’ve noticed:

  • Chips caused during fitting
  • Cracks running from the waste
  • A tray that looks tired however much you clean it
  • Edge chips from dropped bottles

Before you book anyone

  • Whether there are any call-out or travel charges
  • What prep work is covered
  • A fixed quote, and whether VAT is included
  • When it can be used again

How to compare quotes

How we handle shower tray repair in Belton

In most cases, a damaged tray can be repaired where it is, from chipped edges to cracks across the floor of the tray. We match the colour and finish. If you are dealing with damage from a refit or building work and movement when you stand on it, we can help.

Whatever the size of the job, you get the same one-year guarantee in Belton and across Norfolk.

Discoloured square shower tray restored with a new white finish
Where
Belton (NR31)
County
Norfolk
Guarantee
12 months on all our work
Quote
From £95. Free, fixed quote from pictures
Telephone
0345 017 0787
Page updated
23 October 2026

Covering Belton

Belton is about 3 miles west of Gorleston-on-Sea, in Norfolk. Wherever you are in the NR31 postcode area, a technician comes to you. We work in 797 places in Norfolk.

Our repair technicians cover all of NR31 and the streets around it. From Station Road South, Station Road North and Bell Lane or a nearby road, we can come to you. Neighbouring places we cover include Browston Green (1 mile south-east), Burgh Castle (1 mile north), Fritton (2 miles south-west), Ashby (3 miles south) and St Olaves (3 miles south-west). Further out, we also cover Great Yarmouth (4 miles north-east), Gorleston-on-Sea (3 miles east), Thorpe St Andrew (14 miles west), Southtown (3 miles north-east), Caister-on-Sea (6 miles north-east) and Poringland (13 miles west).

Local landmarks in Belton

In Belton, that means homes near Ormiston Venture Academy, Church of All Saints and Moorlands CofE Primary Academy. For rail, the closest station is Berney Arms station, about 2 miles north-west of the centre. Other landmarks nearby include James Paget Hospital (2.4 miles east) and Market Gates Shopping Centre (3.9 miles north-east). For a walk, there is Fritton Lake and Berney Marshes RSPB reserve.

Map of Belton © OpenStreetMap contributors

Landlords, agents and businesses in Belton

Builders use us to fix snagging damage before handover. We can visit several plots in one trip.

Rental properties take more wear, and replacing things at every changeover adds up. A repair between tenancies is a cheaper way to keep the property in good order.

Honest limits

A repair is not always the answer, and we’ll tell you before we start. We can’t fix:

  • Movement caused by a poor base, until the support is fixed
  • Leaks from the waste or pipework (a plumber’s job)
  • A tray broken in more than one place

Send us photos and we will tell you honestly.

Materials we repair

  • Acrylic
  • Enamelled steel
  • Cast iron
  • Ceramic
  • Stone resin

How it works

Expect a friendly, tidy visit. We agree the arrival time in advance, protect the area, and get on with the job, which normally takes a few hours, or most of a day for a full resurface. If we find something your pictures didn’t show, we’ll explain it before carrying on.

  1. First, we check whether the tray moves.
  2. The damaged area is cleaned and opened up.
  3. We reinforce any crack and fill the damage.
  4. We shape the repair, match the colour and finish it.
  5. It’s left to cure, generally until the following day.

Getting ready for the visit

  • Let us know if it has been repaired before
  • Point us to the nearest place to park
  • Open a window if you can

Getting a price

To get a price, send a couple of photos using our quote form or call us. We’ll say straight away whether it can be repaired.

Get a fixed price

Related advice

Your questions about shower tray repair in Belton

How long does it take to cure?

We’ll give you the curing time on the day, normally the day after.

Do you cover the entire of Norfolk?

Everywhere in the UK, Belton included. Travel is included in the price.

Will there be a smell?

It depends on the job, but often a little. Open windows and an extractor fan help, and it soon fades.

Can you price it without visiting?

Generally, yes. A close-up and a wider photo are enough to give a fixed price.

How much does shower tray repair cost in Belton?

Repairs from £95. Every job gets a fixed quote from your photos. Send a close-up of the damage and a wider photo and your postcode.

Can you repair something that’s been repaired before?

Most of the time. Tell us what was done before and we’ll plan for it.

Is it messy?

Dust sheets and masking go down before we start, and tidy up before we leave.

What happens next?

We review the pictures and send a fixed quote and the next dates we have.

Materials and what they mean for the repair

Ceramic

Ceramic trays are hard and glossy. Impacts can chip or crack them, and the repair is polished to match the shine.

Enamelled steel

Steel trays have an enamel surface like a steel bath. Exposed metal can rust, so early repairs help.

How to look after the repair

Once the work has cured, treat it gently:

  • Use the extractor fan
  • Don’t use strong acids or bleach
  • Give the tray a quick rinse after use
  • Get a moving tray checked

Keep an eye on the sealant, and replace it when it splits or goes black.

Stop using the shower if the tray is cracked. Water can get through to the floor and walls, and the damage below isn’t visible.

Prices and what affects them

Prices start from £95. Every quote is fixed and free. What we look at:

  • What the surface is made of
  • How many items we do on one visit
  • The colour and finish to match
  • Any earlier repairs that need removing first

A few things move the price: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Photos let us give you a fixed figure.

Getting a price from pictures

Photographing the damage takes a minute, and it saves a visit. Please include:

  • A coin or ruler next to the damage for scale
  • Natural light rather than flash
  • The material, if you know it
  • Where you are, by postcode

We price from pictures so you do not have to wait in for a survey. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through, and we’ll come back with a fixed figure.

Repair or replace: which is better?

Replacing a tray normally involves removing the screen and tiling, relaying the base and re-tiling. A repair or resurface keeps all of that in place. Our shower tray repair starts from £95. There are no surprise extras on the day. The price we quote from your photos is the price you pay, and if the damage turns out to be different, we discuss it before starting.

Why choose Surface Doctor in Belton

  • A fixed quote before booking
  • Straight answers about what a repair can do
  • CHAS and Constructionline accredited
  • Same prices wherever you are

Take a look at our full price list.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.