East Sussex · England

Shower tray repair & resurfacing in Blackness, East Sussex

Shower tray repair across Blackness and nearby, done in a single visit in most cases.

  • Repairs from £95
  • Chipped corners or rims
  • Damage from a refit or building work
Surface Doctor technician refinishing the outside of a roll-top bath

Shower tray repair in Blackness

What affects the price in Blackness

Repairs from £95. There’s no area surcharge for Blackness. What changes the price is:

  • What the surface is made of
  • Unusual colours or finishes
  • Whether we combine several jobs
  • The size and number of damaged areas

Set against the cost of replacement, repairing generally costs far less, because there’s no removal, plumbing or making good. Your fixed quote shows exactly what’s included.

Send photos for a quote

Before you send photos, these tips help us give you a firm price:

  • Daylight if possible, and no flash reflection
  • Whether it’s been repaired or coated before
  • A coin beside the damage so we can judge size
  • Your postcode, so we can check dates

The quickest way to a price is to send two or three pictures through our quote form or call us. We’ll tell you honestly if a repair is the right fix.

Shower tray repair at your home in Blackness

You don’t always need a new tray. If it’s firmly supported, we can repair it where it is, which is far less work than a replacement. We regularly repair ceramic, enamelled steel and acrylic, and the jobs we see most are a tray that flexes and chips on the edges.

The work is guaranteed for twelve months. If something is not right in that time, we come back and put it right.

Where
Blackness (BN24)
Area hub
East Sussex
Cover
A year, on every repair
Price
From £95. Fixed and free, based on photos
Phone
0345 017 0787
Last updated
23 October 2026
Before and after: an old shower tray refinished by Surface Doctor

Honest limits

We will not take on work that won’t last, so here’s what a repair can’t put right:

  • Plumbing leaks under the tray
  • A tray broken in more than one place
  • Water damage to the floor beneath the tray

If in doubt, send photos and we will say what we think.

What we work on

  • Stone resin
  • Cast iron
  • Ceramic
  • Enamelled steel
  • Acrylic

Your questions about shower tray repair in Blackness

Do you work for landlords and businesses?

Yes. We carry out repairs for householders, landlords, letting agents, builders and businesses.

What happens next?

We review the photos and send a fixed quote.

Are you a vetted contractor?

Yes. Our accreditations include CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.

Do you reseal the tray as well?

We can. After a repair is a good time to reseal.

Is it OK to use a cracked tray?

Only if you’re sure it is not leaking. Check the ceiling below for damp.

I rent my home. Can I book you?

Of course. Check with your landlord; we can send the quote to them too.

Can I add another job to the visit?

Yes, and it’s often cheaper. Just add the extra items to your photos and you’ll get one combined price.

Do you charge for travel?

We don’t add a call-out fee. The fixed quote covers the visit and the work.

Keeping it looking good

How the surface is treated afterwards matters:

  • Get a moving tray checked
  • Rinse away soap after showering
  • Use the extractor fan
  • Store bottles off the tray

Rinse the tray down after showering, clean with mild cleaners, and keep the sealant in good condition so water cannot get underneath.

If the tray creaks or moves, get it checked, before it cracks or gets worse.

Signs you need shower tray repair in Blackness

Rigid trays do not bend, they crack if the floor beneath them is not flat and fully supported. Movement in a timber floor has the same effect.

If you can see any of these, send us a picture:

  • A crack across the base
  • Edge chips from dropped bottles
  • Scratches from cleaning or grit
  • Staining and dullness across the tray

What your quote should include

  • How the room is protected while they work
  • How to look after the finish
  • What preparation is included
  • If travel is included in the price

How to compare quotes

What we do, step by step

We turn up when we said we would, introduces themselves and checks the damage against your photos first. Dust sheets and masking tape go down before we open a single tin. Most visits take a few hours, or most of the day to resurface the whole tray, and the room is left clean and tidy.

  1. We check the tray for movement first.
  2. We clean the damage and open it up so the repair can bond.
  3. Cracks are reinforced and the damage filled.
  4. The repair is shaped, colour-matched and finished.
  5. We leave it to cure, normally until the following day.

Preparing for the visit

  • Let us know which floor the room is on
  • Let us know about parking or access
  • Tell us about any previous repairs or coatings

Get a quote

For a price in Blackness, pictures are the quickest way: one close up, one from further back, plus your postcode. We reply with a fixed quote and our next available dates.

Get a fixed quote

Related advice

Should you replace it?

A new tray can be cheap, but fitting it is not: taking out the enclosure, tiling and resealing. Repairing it takes one visit. Prices start from £95. Our prices are the same across the UK, so there’s no premium for Blackness. What changes the price is the job itself: the material, the amount of damage and how many items.

Why Blackness clients choose us

  • Typically one visit, start to finish
  • Colours mixed by hand to suit your surface
  • Every repair guaranteed for a year
  • No extra charge for your area

Take a look at our full price list.

Blackness and the surrounding area

Blackness is about 2 miles north of Eastbourne, in East Sussex. We visit homes and businesses in Blackness and the surrounding area, so there is no workshop to go to. Blackness is one of 289 towns and villages in East Sussex where we work. You can also see our page for London, about 50 miles away.

All of BN24 is covered. Jobs here include addresses on Forge Place, Hailsham Road and Hankham Road. Close by, we cover Hankham (1 mile north-east), Stone Cross (1 mile south-east), Polegate (2 miles west), Lower Willingdon (2 miles south-west) and Willingdon (2 miles south-west). We also work in nearby towns such as Hastings (12 miles east), Bexhill-on-Sea (8 miles east), Seaford (9 miles west), Lewes (13 miles west), Hailsham (3 miles north-west) and St Leonards (12 miles east).

Around Blackness

We visit homes around St Luke's Church, The Red Lion pub and Stone Cross School, among other places. For rail, the closest station is Pevensey & Westham station, about 1.5 miles east of the centre. A little further out are Pevensey Court House Museum And Gaol (1.9 miles east) and Eastbourne District General Hospital (2.5 miles south-west). The countryside around Blackness includes Combe Hill.

Map of Blackness © OpenStreetMap contributors

Should I try a DIY kit first?

The difference between a kit and a professional repair is mostly in the preparation and colour. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, and the work is guaranteed.

It’s natural to want to try a repair yourself. The trouble is that kit repairs frequently look fine at first and then fail, and then the old filler has to be removed first.

For landlords and businesses

For anyone letting property in or around Blackness, we can repair and quote for several addresses together. Send pictures for each one and we will price them together.

We’re used to working with agents and managing companies. Send the address, photos and access details and we will arrange it.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.