North Yorkshire · England

Shower tray repair & resurfacing in Bolton-on-Swale, North Yorkshire

We travel to Bolton-on-Swale for shower tray chip, crack and scratch repairs and resurfacing. Everything is done in place, with a one-year guarantee.

  • Repairs from £95
  • Damage around the waste
  • Snagging damage in a new bathroom
Surface Doctor technician refinishing the outside of a roll-top bath

Book shower tray repair in Bolton-on-Swale

Landlord and trade work in Bolton-on-Swale

We also carry out snagging repairs for builders and developers, fixing chips and scratches before handover. We are CHAS, Constructionline and SafeContractor accredited.

Hotels, guest houses and holiday lets cannot afford rooms out of action for long, so most of our work is done in a single visit. We can work around your bookings.

How we handle shower tray repair in Bolton-on-Swale

A cracked or chipped shower tray doesn’t always need replacing. If it’s firmly supported, we can repair it where it is, which is far less work than a replacement. We’re often asked to fix movement when you stand on it and a dull, stained or worn surface, across cast iron, acrylic and ceramic.

Every repair comes with our one-year guarantee, wherever you are in North Yorkshire.

Where
Bolton-on-Swale (DL10)
Area hub
North Yorkshire
Cover
A year, on every repair
Price
From £95. Free, fixed quote from pictures
Telephone
0345 017 0787
Updated
23 October 2026
Stained shower tray resurfaced to clean white, before and after

DIY kit or professional repair?

The difference between a kit and a professional repair is mostly in the preparation and colour. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, then guarantee it for a year.

DIY kits are sold for most surfaces, and they can tidy up a tiny mark. The trouble is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler frequently lifts.

Looking after it afterwards

Nothing complicated is needed, just a few sensible habits:

  • Ventilate the room after showers
  • Clean with washing-up liquid and a soft cloth
  • Reseal when the silicone splits or turns black
  • Get a moving tray checked

Check the silicone around the tray every few months, and reseal when it starts to fail.

Act on split sealant early. Water gets behind and under the tray and can cause damage underneath.

Why repair rather than replace?

Trays sit under the screen and tiles, so replacing one disturbs a lot around it. A repair keeps everything as it is. Our shower tray repair starts from £95. A few things move the price: access, material, the extent of the damage and whether we can do several items together. Send pictures and you’ll get a fixed figure.

Why choose Surface Doctor in Bolton-on-Swale

  • One-year guarantee on every repair
  • Dust sheets down, tidy finish
  • One price list for the whole UK
  • Colour-matched on site

Take a look at our pricing.

Questions from Bolton-on-Swale

Is it worth repairing rather than replacing?

In most cases, yes. Replacement brings removal, refitting and making good, which a repair avoids. We’ll be honest if it’s not worth it.

When can I use the shower again?

You’ll get the exact time when we finish.

Do you come to Bolton-on-Swale?

Yes. We work across the UK and travel to Bolton-on-Swale and the rest of North Yorkshire. Send pictures and we’ll quote, or call 0345 017 0787.

Is there any odour?

A little, depending on the job. Ventilation keeps it to a minimum, and it soon fades.

Is a cracked shower tray safe to use?

It’s best to stop using it until it’s checked, because water may be getting underneath.

Can you make an old tray look new?

Yes. The entire tray can be resurfaced.

What do you need from me?

A close-up, a wider photo and your postcode. Then we will agree a date.

Will you leave a mess?

No. The work area is masked and covered, and we take our waste away with us.

What a repair can’t fix

We will always be straight with you, so here’s what a repair can’t fix:

  • Damage below the tray that needs a builder
  • A tray that flexes because it was never properly supported
  • A tray broken in more than one place

Send us pictures and we will tell you honestly before booking.

Materials we repair

  • Acrylic
  • Cast iron
  • Stone resin
  • Enamelled steel
  • Ceramic

When to call us in Bolton-on-Swale

Trays fitted on timber floors can crack if the floor moves, especially if the tray wasn’t bedded properly. On concrete, an uneven base is the usual cause.

Typical reasons for a call-out include:

  • Chips or cracks by the plughole
  • Scratches in the surface
  • A tray that looks tired however much you clean it
  • Cracks running from the waste

Before booking anyone

  • Whether a trained technician does the job
  • When it can be used again
  • Is the price fixed, and does it include VAT?
  • The length of the guarantee and what it covers

How to compare quotes

About Bolton-on-Swale

Bolton-on-Swale is about 4 miles east of Catterick Garrison, in North Yorkshire. Across the DL10 area, a technician comes to you. Bolton-on-Swale is one of 626 towns and villages in North Yorkshire where we work. You can also see our page for Leeds, about 40 miles away.

We cover every part of DL10 and the streets around it. That includes homes on Back Lane, Bolton Road and Blenheim Close and the roads around them. Other places close to Bolton-on-Swale include Scorton (1 mile north), Catterick (1 mile south-west), Catterick Bridge (1 mile west), Brompton-on-Swale (2 miles west) and Brough with St Giles (2 miles west). Larger places within reach include Catterick Garrison (4 miles west), Northallerton (8 miles south-east), Richmond (5 miles west), Thirsk (15 miles south-east), Colburn (3 miles west) and Bedale (7 miles south).

Around Bolton-on-Swale

Locally, our jobs take us to homes close to Bolton-on-Swale St Mary's CofE Primary School, The Heifer pub and Church of St Mary. Further afield, we also cover the area around Killerby Castle (2 miles south) and Duchess of Kent Military Hospital (3.9 miles west).

Map of Bolton-on-Swale © OpenStreetMap contributors

What we do, step by step

The work is clean and fairly quiet. We protect the area first, then the job itself takes a few hours, or most of a day for a full resurface. Before we leave, we explain the curing time and the aftercare.

  1. First, we check whether the tray moves.
  2. The damaged area is cleaned and opened up.
  3. Cracks are reinforced and the damage filled.
  4. We shape the repair, match the colour and finish it.
  5. It’s left to cure, generally until the day after.

Before we arrive

  • Have somewhere for us to park nearby if possible
  • Make sure the room can be ventilated
  • Clear the area around the damage

How to get a price

No survey visit is needed: we price from pictures. Use the quote form, or ring 0345 017 0787 to talk it through.

Get a free quote

Read more

What your shower tray is made of matters

Stone resin

Stone resin trays are rigid and slim. A flat, solid base is essential, and repairs are matched to the gel coat.

Ceramic

Ceramic trays are hard and glossy. They chip and crack from impact, and we match the gloss when we repair them.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.