North Lincolnshire · England
Shower tray repair & resurfacing in Bonby, North Lincolnshire
Damaged shower tray in Bonby? We put it right where it is, mix the colour on the day and back it with a one-year guarantee.
- Repairs from £95
- A damaged area around the waste
- Chipped corners or rims
DIY repairs versus a professional job
We understand the appeal of fixing it yourself. The trouble is that kit repairs frequently look fine at first and then fail, and then the old filler has to be removed first.
It’s tempting to reach for a kit, but many of the jobs we do start with putting right a DIY repair. Getting it right first time is typically cheaper.
Shower tray repair in Bonby without replacing anything
Shower tray repairs are one of our most common jobs. Chipped edges, cracks and worn finishes are all things we fix in place. We are often asked to fix cracks running from the waste and a dull, stained or worn surface, in cast iron, stone resin and ceramic.
Your repair is guaranteed for a year, as with every job we do.
- Location
- Bonby (DN20)
- Region
- North Lincolnshire
- Cover
- One year on every repair
- Quote
- From £95. Free and fixed, from your photos
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
Repairs by material
Ceramic
Ceramic trays are hard and glossy. Impacts can chip or crack them, and the repair is polished to match the shine.
Stone resin
Stone resin trays are popular because they’re rigid and low-profile. A flat, solid base is essential, and repairs are matched to the gel coat.
Landlords, agents and businesses in Bonby
We carry out planned and one-off repairs for housing associations and facilities teams. Repairing in place avoids the disruption of a replacement, which is easier on the people living there.
Builders use us to fix snagging damage before handover, so there is no need to replace a damaged item at the last minute. Several plots can be done in one visit.
Nearby places to Bonby
Also in Bonby
About Bonby
Bonby is about 8 miles north-east of Scunthorpe, in North Lincolnshire. Jobs in Bonby are booked in like any other job: a fixed quote from pictures, then a visit to do the work. Bonby is one of 90 towns and villages in North Lincolnshire we cover. We work right across the region, from Bonby to Leeds (about 45 miles away).
Every address in DN20 is covered, from the main roads to the quietest streets. You will find streets such as Main Street, Sheepdyke Lane and Hall Meadow, all of which we cover. Being close to the B1204, Bonby is simple for us to get to. Nearby, we also work in Saxby All Saints (1 mile north-west), Worlaby (1 mile south-east), Horkstow (2 miles north-west), Elsham (3 miles south-east) and Appleby (3 miles west). Within a short drive, we also cover Scunthorpe (8 miles south-west), Barton-upon-Humber (4 miles north-east), Bottesford (9 miles south-west), Brigg (5 miles south), Frodingham (7 miles west) and Crosby (7 miles west).
What’s near Bonby
We visit homes around Church of Saint Andrew and The Haymaker pub. Bonby’s nearest station is Barton-On-Humber station, roughly 4.6 miles north. A little further out are Glanford (1.9 miles south) and Barton upon Humber Castle (4.3 miles north-east). The countryside around Bonby includes Far Ings National Nature Reserve.
Prices and what affects them
Repairs from £95. We give every job a fixed quote from photos. These are the things that affect it:
- Unusual colours or finishes
- What kind of damage it is
- The material
- Access to the area
We do not add extras on the day. The price we quote from your pictures is the price you pay, unless the damage turns out to be different, in which case we talk to you first.
How to get a fixed quote
Good pictures mean an accurate price. Here’s what we find most useful:
- Whether it’s been repaired or coated before
- A coin beside the damage so we can judge size
- One sharp close-up of the damage
- One picture of the entire shower tray
Call 0345 017 0787 or use the quote form. With a clear picture of the damage and one of the whole shower tray, we can give you a fixed price the same day in most cases.
Looking after it afterwards
Looking after the surface is easy, and it makes a real difference:
- Don’t ignore a tray that flexes
- Do not stand heavy bottles on the tray
- Ventilate the room after showers
- Check the seal every few months
Avoid abrasive pads and strong descalers. Warm water and a mild detergent is enough.
Every shower forces a little water into a crack, and over months that can rot the floor. Getting it repaired quickly is much cheaper than fixing a floor.
Common questions in Bonby
How soon can you come?
It depends on the time of year and where you are. Send photos with your postcode and we will reply with the earliest dates.
What happens next?
We look at the photos and reply with a fixed price and some dates. If anything’s unclear, we’ll ask for another photo.
How much does shower tray repair cost in Bonby?
Prices start from £95. We give a fixed quote based on pictures of the damage. Send a close-up of the damage and a wider photo and your postcode.
Is it messy?
Dust sheets and masking go down before we start, and we clean up when we’ve finished.
Do you come to Bonby?
Yes, we do. Technicians travel to Bonby from across the region, and the price is the same as everywhere else.
Are you a vetted contractor?
We are accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.
It’s been repaired before. Can you still fix it?
Yes, we often do. Removing the old work can add time, and that’s in the quote.
Will there be a smell?
There can be some smell while we work, which is why we ventilate. It fades as everything cures.
When we’d advise against a repair
In fairness, some problems need a different fix:
- Multiple cracks across the tray
- Water damage to the floor beneath the tray
- Plumbing leaks under the tray
If in doubt, send pictures and we will say what we think.
Materials we repair
- Ceramic
- Stone resin
- Cast iron
- Enamelled steel
- Acrylic
When to call us in Bonby
Dull and stained trays are normally down to cleaning: limescale, harsh chemicals and abrasive pads strip the surface finish.
These are the problems we are asked about most:
- A tray that looks tired however much you clean it
- Scratches from cleaning or grit
- A tray that flexes
- Damage from a refit or building work
Questions to ask before booking
- How to care for the finish
- Whether a trained technician does the job
- How long the guarantee is and what it covers
- What prep work is covered
The process
Nothing needs to be moved out of the room. Everything we use comes in the van with us, lay protective sheets and get going once we have agreed what we’re doing. Most jobs take a few hours, or most of a day for a full resurface, and you are welcome to carry on with your day while we work.
- First, we check whether the tray moves.
- The damaged area is cleaned and opened up.
- Cracks are reinforced and the damage filled.
- We shape the repair, match the colour and finish it.
- We leave it to cure, normally until the following day.
How to prepare
- Open a window if you can
- Keep a parking space free if you can
- Move bottles, mats and clutter away from the area
Ask for a price
Most customers in Bonby get their price from pictures. Tell us what happened and where you are, and we’ll send back a fixed quote and some dates.
Related advice
About our accreditations · Every repair comes with a one-year guarantee.
