Kent · England

Shower Tray Repair in Brabourne Lees

Problem with your shower tray in Brabourne Lees? We put it right where it is, match it on site and back it with a one-year guarantee.

  • Repairs from £95
  • Damage around the waste
  • Damage from a refit or building work
Surface Doctor technician refinishing the outside of a roll-top bath

Trusted shower tray repair in Brabourne Lees

Shower tray repair in Brabourne Lees, done in place

We repair cracks, chips and scratches in stone resin, acrylic and ceramic trays, and worn trays can be resurfaced completely. The tray stays in place, so the screen and tiling stay as they are. Common call-outs are for a cracked shower tray and scratches from cleaning or grit, across cast iron, enamelled steel and acrylic.

The work is guaranteed for twelve months. If something isn’t right in that time, we come back and put it right.

Area
Brabourne Lees (TN25)
Region
Kent
Warranty
A year, on every repair
Quote
From £95. Free and fixed, from your photos
Telephone
0345 017 0787
Updated
23 October 2026
Stained shower tray resurfaced to clean white, before and after

Your questions about shower tray repair in Brabourne Lees

Can a cracked shower tray be repaired?

Often. If the tray moves, the support needs fixing first.

Is there a call-out fee?

We do not add a call-out fee. The fixed price covers the visit and the work.

Can you make an old tray look new?

Yes. We can resurface the entire tray for a fresh finish.

Do you cover Brabourne Lees?

Yes. We cover the entire UK and travel to Brabourne Lees and the rest of Kent. Send pictures and we will quote, or call 0345 017 0787.

How long does it take to cure?

Normally by the following day. We will tell you the exact time when we finish.

How quickly can you book me in?

That depends on our diary for your area. We will offer you dates when we send your quote.

Are you accredited?

Yes, including CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.

Is it OK to have pets in the house?

On the day, the room should be kept clear of pets and children.

How to care for the repair

It’s all simple stuff, just a few sensible habits:

  • Keep harsh chemicals off the tray
  • Ventilate the room after showers
  • Report any creaking or movement early
  • Check the seal every few months

Rinse the tray down after showering, use mild, non-abrasive cleaners, and keep the sealant in good condition so water cannot get underneath.

Don’t keep using a cracked tray. Water can get through to the floor and walls, where it causes damage you can’t see.

Where we work around Brabourne Lees

Brabourne Lees is about 5 miles east of Ashford, in Kent. Our repair technicians come to clients in Brabourne Lees and the surrounding area, so nothing has to leave your home. We cover 922 places in Kent. Our nearest city page is London, about 53 miles away.

Our visits in TN25 are booked in the same way as anywhere else. Whether you live on Knatchbull Way, Mountbatten Way and Prospect Way or a nearby road, a technician can come to you. Neighbouring places we cover include Smeeth (1 mile south-west), Lilyvale (1 mile south-east), Bircholt Forstal (1 mile north), Ridgeway (1 mile west) and Stone Hill (1 mile south-east). Larger places within reach include Ashford (5 miles west), Canterbury (12 miles north-east), Dover (14 miles east), Folkestone (9 miles east), Faversham (14 miles north) and Hythe (6 miles south-east).

Local landmarks in Brabourne Lees

Locally, our jobs take us to homes close to Smeeth Community Primary School and Church of St Mary, among other places. The nearest railway station is Westenhanger station, roughly 3.4 miles south-east of the centre. A little further out are Lympne Castle (4.2 miles south-east) and William Harvey Hospital (2.9 miles north-west). The countryside around Brabourne Lees includes Hatch Park and Tolsford Hill.

Map of Brabourne Lees © OpenStreetMap contributors

Prices and what affects them

Prices start from £95. You’ll know the full cost before you book. We look at:

  • Whether old repairs or coatings need taking off
  • What the surface is made of
  • Access to the area
  • How hard the colour is to match

It helps to know what pushes a price up or down: access, material, the extent of the damage and whether we can do several items together. Photos let us give you a fixed figure.

Send photos for a quote

The better the photos, the more accurate the price. Here’s what we find most useful:

  • One picture of the whole shower tray
  • Good light, ideally daylight, without flash glare
  • Details of any past repairs
  • A close-up of the damage, in focus

There’s no need for us to visit first. Photos are enough for us to price nearly every job: we need a close-up, a wider picture and your postcode, and we will come back to you with a fixed figure.

What we do, step by step

Here’s how a visit generally runs: we arrive on time, sheet and mask the area around the job, carry out the work and tidy away. Plan for a few hours, or most of a day for a full resurface. Before leaving, we tell you how long to leave it and what to avoid for the first few days.

  1. First, we check whether the tray moves.
  2. The damaged area is cleaned and opened up.
  3. We reinforce any crack and fill the damage.
  4. The repair is shaped, colour matched and finished.
  5. It’s left to cure, usually until the following day.

How to prepare

  • Let us know if it has been repaired before
  • Mention any parking restrictions or tricky access
  • Keep children and pets away from the room on the day

Ask for a price

A quote takes minutes to ask for: take one close-up and one wider shot of the shower tray, include your postcode and send them over. What comes back is a fixed quote, not a guess.

Get a free quote

Read more

When to call us in Brabourne Lees

A tired-looking tray is often the result of years of cleaning: limescale, harsh chemicals and abrasive pads strip the surface finish.

Keep an eye out for these signs:

  • Cracks running from the waste
  • Chipped corners or rims
  • Movement when you stand on it
  • Scratches in the surface

What your quote should include

  • What protection goes down before work starts
  • How the colour is matched
  • The length of the guarantee and what it covers
  • How to care for the finish

Choosing a repair company

For landlords and businesses

Hospitality businesses cannot afford rooms out of action for long, so most of our work is done in a single visit. We can work around your bookings.

Rental properties take more wear, and replacing items every time a tenant leaves is expensive. Repairing between tenants keeps the property presentable for less.

Different materials, different repairs

Acrylic

Acrylic trays are lighter and slightly flexible, so a firm base is essential. We repair cracks and scratches.

Stone resin

Stone resin trays are heavy and rigid with a gel-coat finish. Poor support underneath leads to cracks, and chips are filled and matched to the surface.

When we’d advise against a repair

To be straight with you, there are a few things a repair won’t fix:

  • A tray that flexes because it was never properly supported
  • Rotten or damaged flooring underneath
  • Leaking waste fittings

If in doubt, send pictures and we’ll say what we think.

What we work on

  • Stone resin
  • Ceramic
  • Enamelled steel
  • Acrylic
  • Cast iron

Can I fix it myself?

What a professional repair adds is preparation, colour matching and finishing. We prepare the area properly, mix the colour on site and polish the finish to match, then guarantee it for a year.

For a hairline mark somewhere you will never see, a kit may be enough. For damage in plain view, cracks, holes or rust, or coloured finishes, a professional repair is worth it.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.