Herefordshire · England

Shower Tray Repair for Brilley homes

Shower tray chip, crack and scratch repairs and resurfacing for homes and businesses in Brilley and across Herefordshire. Free, fixed quotes from your photos.

  • Repairs from £95
  • A tray that flexes
  • A crack across the base
Surface Doctor technician refinishing the outside of a roll-top bath

Shower tray repair in Brilley

FAQs for Brilley

Do you come to Brilley?

Yes. We cover the entire UK and come to Brilley. Send photos and we will quote, or call 0345 017 0787.

Can you replace the silicone at the same time?

Yes. We can repair and reseal on the same visit.

What happens next?

We review the photos and send a fixed quote with dates.

Can I add another job to the visit?

Yes. Combining jobs on one visit brings the cost down. Send pictures of everything you’d like done.

Can tenants book a repair?

Of course. Ask your landlord first, and we can send them the quote if that helps.

Is it safe with children and pets around?

Keep pets and children away from the work area on the day, mainly so nothing gets touched before it has cured.

Can I keep using a cracked tray?

Not until you know the crack is not letting water through. Look for damp or stains below.

Can a cracked shower tray be repaired?

In most cases. A tray that moves needs its support sorting before the repair.

Shower tray repair in Brilley without replacing anything

We repair cracks, chips and scratches in stone resin, acrylic and ceramic trays, or resurface the whole tray if it’s worn. Nothing is taken out, so the enclosure and tiles aren’t disturbed. Typical jobs include chipped corners or rims and a crack across the base, in enamelled steel, ceramic and cast iron.

Every job is backed for twelve months, and the guarantee is the same wherever you live. If something goes wrong with the work, we come back.

Location
Brilley (HR3)
County
Herefordshire
Guarantee
12 months on all our work
Quotes
From £95. Free and fixed, from your photos
Phone
0345 017 0787
Page updated
23 October 2026
Discoloured square shower tray restored with a new white finish

Repair or replace: which is better?

If the tray is solid and the crack hasn’t let water spread, repair is normally best. If water has damaged the floor, or the tray is cracked in several places, a new tray may be better. Prices start from £95. We charge the same wherever you are, so there is no premium for Brilley. The job itself decides the price: how much damage, what it’s made of and how many items.

Why book with us

  • Colours mixed by hand to suit your surface
  • Free fixed quotes from pictures
  • Most jobs done in one visit
  • We’ll tell you if it’s not worth repairing

Read our prices page.

For landlords and businesses

Rented homes see more wear and tear, and replacing things at every changeover adds up. A repair between tenancies is a cheaper way to keep the property in good order.

Landlords, letting agents and housing providers in Brilley use us as well as householders. A repair between tenants keeps the property empty for less time, and it costs much less than replacing.

What shower tray repair costs

Repairs from £95. We charge the same across the UK, including Brilley. What changes the price is:

  • Previous DIY repairs that have to come out
  • How easy the damage is to reach
  • Whether it’s a chip, crack, burn or wear
  • Whether we combine several jobs

What it costs depends on how much damage there is and what kind, the material and how many jobs we combine into one visit. We give a fixed price from your pictures, so you know the cost before booking.

Quotes from your photos

Good pictures mean an accurate price. Here’s what helps:

  • Something in shot to show the size
  • Your postcode, so we can check dates
  • Whether it’s been repaired or coated before
  • A clear, close picture of the problem area

For most jobs, pictures are all we need to give you a price. Tell us what happened and where you are, and we will reply with a fixed quote and the earliest dates we have.

The process

There is not much you need to do on the day. Let us in and show us the room, and we will get on with it. Most visits take a few hours, or most of the day to resurface the whole tray, including clearing up.

  1. We check the tray is firmly supported and find the cause of any crack.
  2. We clean and prepare the damaged area or the entire tray.
  3. We fill and reinforce chips and cracks, then sand them flush.
  4. The repair is colour-matched, or the entire tray gets a new finish.
  5. We leave it to cure; the shower is normally usable the next day.

How to prepare

  • Tell us if there are stairs or a lift
  • Clear toiletries, mats and anything else from around the area
  • Have a window or extractor fan available

How to get a price

Ring 0345 017 0787, or send us pictures through the quote form. With one close-up and one wider picture, we can price the job.

Get a fixed price

Advice

Looking after it afterwards

A little care keeps the finish looking good. We recommend:

  • Do not stand heavy bottles on the tray
  • Rinse the tray after each shower
  • Avoid strong descalers and bleach
  • Replace failing sealant promptly

Store heavy bottles on a shelf, not on the tray, to avoid chips.

Stop using the shower if the tray is cracked. Water may be getting under the tray, where it causes damage you cannot see.

What we are called out for in Brilley

Rigid trays don’t bend, they crack if the floor beneath them is not flat and fully supported. Timber floors that move can cause it too.

Look out for these signs:

  • Cracks running from the waste
  • A dull, stained or worn surface
  • Damage around the waste
  • A tray that flexes

Comparing quotes

  • What protection goes down before work starts
  • Whether the colour is mixed to match
  • What the guarantee covers, and for how long
  • Who will actually do the work

Choosing a repair company

Different materials, different repairs

Acrylic

Acrylic trays are lighter and slightly flexible, so a firm base is essential. We repair cracks and scratches.

Stone resin

Stone resin trays are popular because they’re rigid and low-profile. They need a flat, solid base, and we match repairs to the surface finish.

DIY kit or professional repair?

DIY kits are sold for most surfaces, and they can tidy up a tiny mark. Where they fall down is colour and preparation: they come in a handful of shades, and if the surface isn’t prepared the repair won’t last.

If you are set on a kit, follow its instructions closely and work on a clean, dry surface, and don’t use it until it has fully cured. If it does not work out, we can still repair it properly.

Where we work around Brilley

Brilley is about 16 miles west of Hereford, in Herefordshire. Our technicians come to customers in Brilley and nearby villages, so nothing has to leave your home. We cover all 255 towns and villages across Herefordshire, from the larger towns to small villages. You can also see our page for Birmingham, about 55 miles away.

All of HR3 is within our area. If you’re just outside Brilley, we cover Brilley Mountain (1 mile north), Whitney-on-Wye (1 mile south), Millhalf (1 mile south-east), Lower Welson (2 miles east) and Dukes (2 miles east). Within a short drive, we also cover Leominster (15 miles east), Kington (5 miles north-east), Y Gelli Gandryll (5 miles south-west), Hay (5 miles south-west), Bobblestock (15 miles east) and Credenhill (12 miles east).

Local landmarks in Brilley

Typical jobs here are in homes near Church of St.mary. Other landmarks nearby include Welshwood Farm (0.9 miles east). Green spaces nearby include Little Mountain and Birches Farm.

Map of Brilley © OpenStreetMap contributors
CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.