East Riding of Yorkshire · England
Shower tray repair & resurfacing in Brough, East Riding of Yorkshire
Shower tray chip, crack and scratch repairs and resurfacing for homes and businesses in Brough and across East Riding of Yorkshire. Free, fixed quotes from your pictures.
- Repairs from £95
- Edge chips from dropped bottles
- Chips or cracks by the plughole
Shower tray repair in Brough, done in place
A worn or stained tray can be resurfaced, giving it a fresh, even finish. Typical jobs include snagging damage in a new bathroom and chips or cracks by the plughole, on stone resin, cast iron and ceramic.
All of our repairs are guaranteed for twelve months in Brough and everywhere else. If something goes wrong with the work, we come back.
- Location
- Brough (HU15)
- County
- East Riding of Yorkshire
- Guarantee
- One year on every repair
- Price
- From £95. Free and fixed, from your photos
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
Looking after it afterwards
Nothing complicated is needed:
- Keep harsh chemicals off the tray
- Use a mild, non-abrasive cleaner
- Reseal when the silicone splits or turns black
- Use the extractor fan
Keep scourers and harsh chemicals off the tray. Warm water and a mild detergent is enough.
Act on split sealant early. Water gets behind and under the tray and can damage the floor below.
Brough: your questions answered
How do I get a price for shower tray repair in Brough?
Repairs from £95. Because every job differs, we price from photos. You will get a fixed figure before you book.
Can a stained tray be refinished?
Yes. Resurfacing gives a worn tray an even, clean finish.
When can you do it?
It depends on the time of year and where you are. Send pictures with your postcode and we will reply with the earliest dates.
What happens next?
You’ll get a fixed quote back. There’s no obligation to book.
Which areas do you work in?
All of East Riding of Yorkshire, and the rest of the UK. There is no extra charge for travel.
Are you a vetted contractor?
We are accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.
Can you redo someone else’s repair?
Most of the time. Let us know what was used before and we will plan for it.
Will the price change on the day?
We stop, show you and agree any change before carrying on. Nothing extra is done without your say-so.
Brough and the surrounding area
Brough is about 9 miles west of Kingston upon Hull, in East Riding of Yorkshire. Book a date that suits you, and you’ll know when to expect us, so there’s no waiting around. Brough is one of 299 places in East Riding of Yorkshire where we work. Our jobs stretch from Brough to Leeds (41 miles away).
We cover every part of HU15. That includes homes on Calder Square, Station Road and Birch Place and the roads around them. Neighbouring places we cover include Elloughton (1 mile north), Welton (1 mile north-east), Melton (1 mile east), Brantingham (2 miles north) and North Ferriby (2 miles east). Further out, we also cover Beverley (10 miles north-east), Goole (13 miles west), Hessle (5 miles east), Cottingham (7 miles north-east), Market Weighton (10 miles north-west) and Hedon (15 miles east). Brough is one of the larger places we cover in East Riding of Yorkshire.
Around Brough
Around Brough, we work in homes near Green Dragon Public House, All Saints and Welton Primary School. For rail, the closest station is Brough station, roughly 0.6 miles west of the centre. Further afield, we also cover the area around Cave Castle (3.4 miles north-west) and Hull and East Riding Hospital (5.3 miles east). Not far away are Far Ings National Nature Reserve.
Can I fix it myself?
Kits are cheap and easy to find, but many of the jobs we do start with putting right a DIY repair. Getting it right first time is typically cheaper.
We understand the appeal of fixing it yourself. The risk is that a kit repair hides the damage for a while, then fails, and then the old filler has to be removed first.
Honest limits
Some jobs aren’t right for a repair, for example:
- Multiple cracks across the tray
- Movement caused by a poor base, until the support is fixed
- Damage below the tray that needs a builder
If in doubt, send pictures and we will say what we think before you book.
What we work on
- Cast iron
- Enamelled steel
- Ceramic
- Acrylic
- Stone resin
Different materials, different repairs
Acrylic
Acrylic is light and warm to the touch, but it needs firm support underneath. Repairs to cracks are reinforced from the back.
Ceramic
Ceramic gives a hard, high-gloss surface. They chip and crack from impact, and we match the gloss when we repair them.
Common problems we fix in Brough
Cracks frequently start at the waste, because that’s where the tray is weakest and the fitting puts pressure on it.
The things customers typically mention when they call include:
- A damaged area around the waste
- A tray that creaks or moves underfoot
- Chipped corners or rims
- Snagging damage in a new bathroom
Comparing quotes
- When it can be used again
- What protection goes down before work starts
- Aftercare advice
- Is the price fixed, and does it include VAT?
Landlords, agents and businesses in Brough
Rented homes see more wear and tear, and replacing things at every changeover adds up. Repairing between tenants keeps the property presentable for less.
Housing associations and facilities teams use us for planned and reactive repairs in East Riding of Yorkshire and across the UK. Repairing in place avoids the disruption of a replacement, which matters when someone is living in the home.
Other services in Brough
What affects the price in Brough
Repairs from £95. Prices are worked out job by job. The main factors are:
- Whether it’s a chip, crack, burn or wear
- Doing more than one item at once
- Any earlier repairs that need removing first
- How easy the damage is to reach
It helps to know what pushes a price up or down: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Send photos and you will get a fixed figure.
How to get a fixed price
We price nearly every job from pictures. This is what we need:
- A coin beside the damage so we can judge size
- A photo taken from further back
- Whether it’s been repaired or coated before
- The material, if you know it
You don’t need a survey visit. Photos are enough for us to price nearly every job: send a close-up, a wider shot and your postcode, and we’ll reply with a fixed price.
What we do, step by step
Once we’re through the door, we keep the work contained to the one room. We mask off everything nearby, the job takes a few hours, or most of a day for a full resurface, and we finish by cleaning up and talking you through the result.
- We check the tray for movement first.
- We clean the damage and open it up so the repair can bond.
- Cracks are reinforced and the damage filled.
- The repair is shaped, colour matched and finished.
- We leave it to cure, normally until the following day.
How to prepare
- Keep a parking space free if you can
- Avoid using the area for a few hours before we arrive
- Mention any earlier repairs or resurfacing
Get a quote
Getting a price is easy: take a close-up of the damage and a photo from further back, send them over with your postcode, and you will get a fixed quote back. Quotes are free and you’re under no obligation.
Related advice
About our accreditations · Every repair comes with a one-year guarantee.
