Shropshire · England
Shower tray repair & resurfacing in Calcott, Shropshire
Shower tray repair in Calcott without the cost of replacing. Get a fixed quote from your photos, then book a visit.
- Repairs from £95
- A tray that creaks or moves underfoot
- A damaged area around the waste
What we can’t put right
Not everything can be repaired, and we will tell you before we start. We cannot fix:
- Damage below the tray that needs a builder
- A tray that flexes because it was never properly supported
- Trays cracked in several places
If in doubt, send pictures and we will say what we think.
Surfaces we repair
- Stone resin
- Enamelled steel
- Ceramic
- Acrylic
- Cast iron
How we handle shower tray repair in Calcott
We repair cracks, chips and scratches in stone resin, acrylic and ceramic trays, and worn trays can be resurfaced completely. The tray stays in place, so the enclosure and tiles aren’t disturbed. Common call-outs are for cracks running from the waste and a tray that flexes, in acrylic, cast iron and stone resin.
Big or small, it’s backed by a one-year guarantee in Calcott and across Shropshire.
- Location
- Calcott (SY3)
- Region
- Shropshire
- Warranty
- 12 months on all our work
- Quotes
- From £95. Fixed and free, based on pictures
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
Also near Calcott
More services for Calcott
Why repair rather than replace?
The tray itself may not cost much, but the work around it does: removing the screen, breaking out tiles, relaying the base and re-tiling. A repair is one visit. Prices start from £95. Rather than charging by the hour, we fix the price before we start. It depends on the damage, the material and access, and combining items on one visit brings it down.
Why us?
- Colour-matched on site
- We’ll tell you if it’s not worth repairing
- A year’s guarantee on all work
- Work done at your home or business
Read our prices page.
How it works
We agree an arrival time beforehand, so you are not left guessing. Once we are there, the work takes a few hours for a repair, longer for a full resurface for most jobs. We leave the room clean.
- First, we check whether the tray moves.
- The damaged area is cleaned and opened up.
- We reinforce any crack and fill the damage.
- We shape the repair, match the colour and finish it.
- We leave it to cure, normally until the following day.
Getting ready for the visit
- Tell us if there are stairs or a lift
- Keep pets and children out of the room while we work
- Mention any parking restrictions or tricky access
Ask for a price
We price from photos so you do not have to wait in for a survey. Use the quote form, or ring 0345 017 0787 to talk it through, and you will get a fixed figure back.
Advice
Can I fix it myself?
DIY kits are sold for most surfaces, and they can make a small mark look better. Where they fall down is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler often lifts.
We understand the appeal of fixing it yourself. The risk is that a kit repair hides the damage for a while, then fails, and the old filler has to come out before a proper repair.
What affects the price in Calcott
Prices start from £95. We do not charge extra for travel to Calcott. The price comes down to:
- The material and finish
- Doing more than one item at once
- Access to the area
- Previous DIY repairs that have to come out
Most people are surprised how affordable a repair is, particularly next to the cost of replacement. Send pictures and we’ll give you the exact figure.
How to get a fixed price
Photographing the damage takes a minute. Try to send:
- Good light, ideally daylight, without flash glare
- Any details about the material
- Any earlier repairs or coatings
- A clear, close picture of the problem area
Getting a quote takes a couple of minutes: take one close-up and one wider shot of the shower tray, add your postcode and send them over. What comes back is a fixed price, not a guess.
Looking after it afterwards
Nothing complicated is needed, just a few sensible habits:
- Clean with washing-up liquid and a soft cloth
- Keep harsh chemicals off the tray
- Replace failing sealant promptly
- Give the tray a quick rinse after use
Rinse the tray down after showering, use mild, non-abrasive cleaners, and keep an eye on the sealant so water can’t get underneath.
If the tray creaks or moves, get it checked, before it cracks.
Different materials, different repairs
Acrylic
Acrylic feels warm and is light, but it relies on good support. Cracks are strengthened from behind before the front is finished.
Stone resin
Stone resin trays are rigid and slim. They need a flat, solid base, and repairs are matched to the gel coat.
For landlords and businesses
Rental properties take more wear, and replacing things at every changeover adds up. Repairing between tenants keeps the property presentable for less.
Builders, developers and site managers book us for snagging repairs, putting right damage done during fitting. We’re CHAS, Constructionline and SafeContractor accredited.
Where we work around Calcott
Calcott is about 3 miles west of Shrewsbury, in Shropshire. Book a date that suits you, and we’ll give you an arrival time in advance, so you’re not left waiting in all day. Calcott is one of 433 towns and villages in Shropshire where we work. Our nearest city page is Birmingham, about 42 miles away.
Every address in SY3 is within our area. Neighbouring places we cover include Bicton (1 mile north), Oxon (1 mile south-east), Bowbrook (1 mile south-east), Montford Bridge (1 mile north-west) and Ford (2 miles west). Within a short drive, we also cover Shrewsbury (3 miles east), Oswestry (14 miles north-west), Coleham (3 miles south-east), Kingsland (3 miles east), Belle Vue (3 miles south-east) and Monkmoor (4 miles east).
Landmarks near Calcott
Typical jobs here are in homes near Bicton CofE Primary School and Nursery and Church of the Holy Trinity, among other places. For rail, the closest station is Shrewsbury station, about 2.8 miles east of the centre. Further afield, we also cover the area around Shelton Hospital (0.9 miles south-east) and Shrewsbury Castle (2.9 miles east). Open spaces near Calcott include Bomere Pool.
Calcott questions
Which areas do you work in?
We cover the entire UK, including Calcott and the rest of Shropshire. Just include your postcode and we will confirm dates.
Can you do more than one item on the same visit?
Yes. Doing several items on one visit typically costs less than separate visits. Include photos of each item.
What does shower tray repair cost?
Prices start from £95. Because every job differs, we price from pictures. You know the full cost before anything is booked.
Do you cover Calcott?
Yes. We work across the UK and come to Calcott. Send us pictures for a fixed quote, or call 0345 017 0787.
When can you do it?
Your quote comes with available dates. Tell us if you need it done quickly.
Is a cracked tray repairable?
In most cases. A tray that moves needs its support sorting before the repair.
Can you replace the silicone at the same time?
We can. It’s a good time to replace old sealant.
Is it messy?
No. The work area is masked and covered, and we leave the room clean.
About our accreditations · Every repair comes with a one-year guarantee.
